A Printer that Delivers 1,000 Pages a Minute?


Recommended Posts

Two researchers from The College of Judea and Samaria in Israel have designed an ink-jet printer head that could lead to printers capable of chugging out 1,000 pages per minute ? or even more.

The innovative printer head created by engineers Moshe Einat and Nissim Einat works in a similar way as a liquid crystal display (LCD). But while an LCD emits tiny pixels of light, collectively forming the picture on your laptop or television, their print head emits pixels of ink. Their basic design is small, but it can be reproduced and the copies combined into one large printer head.

?Unlike traditional printer heads that are small and have to move back and forth across the page, our print head can be enlarged into one that is the size of a sheet of paper or larger. One can think of it as an 'ink-emitting screen',? Moshe Einat told PhysOrg.com. ?This means it could print one page almost instantly, and hundreds of pages in just seconds.?

Current ink-jet printer heads work by channeling ink from a main reservoir to a series of nozzles, which are negatively pressurized to eject equal-sized ink drops. But when the number of nozzles increases, the pipe manifold connecting the reservoir to the nozzles becomes complicated and stable ink-flow conditions are harder to maintain. For example, shock waves in the ink can create ?cross-talk? problems between nozzles. Another issue is the drop-ejection rate, which must be limited in order to mainstain system stability and print quality. This, in turn, stunts the print speed. The motion of standard print heads presents additional problems.

?Our design avoids these physical limitations,? said Einat.

The design's building block is a micro-reservoir of ink that feeds four nozzles. The reservoir is square, one millimeter (mm) on each side, and is 0.5 mm deep. The ink enters the nozzles via capillary action (the way water naturally creeps up a plant stem, for instance). To refill, an ink-coated ?wiper? slides over the top of the reservoir, depositing a layer of ink. The small amount of ink in each reservoir and the natural capillary force between the ink and the reservoir walls make pressure regulation fairly simple.

Einat and Einat combined many of these basic stand-alone segments into a 12x12 cm2 printer head matrix with a total of 57,600 nozzles. They subjected it to several tests to confirm proper ink flow within the system.

This design, which the researchers dub JeTrix, has many potential applications. Says Einat, ?The future applications of JeTrix will be traditional, such as extremely high-speed printers for industry, offices, and homes. But we also anticipate brand-new, pioneering applications. One example is in-store book printing ? where the book is printed instantly for the customer. This could enable small bookshops or even airport kiosks to carry a huge variety of books. There's also personalization ? newspapers or journals printed with a customer's name, favorite topics, and suitable advertisements.?

He continues, ?The JeTrix project is still in an early stage. The concept was proofed in a laboratory prototype, but we expect that a commercial product will be ready after two years of development, which will include additional funding and product engineering.?

Source

not possible. thats approximately 16.67 pages a second, and there is no paper feeding technology or rollers that can operate at the required RPM without massive weardown after 30 seconds without overheating the rollers themselves.

and imagine how the paper will fllllllllllly..... :shifty:

not possible. thats approximately 16.67 pages a second, and there is no paper feeding technology or rollers that can operate at the required RPM without massive weardown after 30 seconds without overheating the rollers themselves.

The key word here is "have designed", surely you read the article tho? :pinch:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The sweet release of death has never looked more appealing.
    • Meh, just another dongle-haven downgrade compared to my Surface Pro 7+. Whenever I decide to upgrade in the next decade or so, it certainly won't be another microslop Surface with this enshitification trend they've been having after the Surface Pro 7+. Hopefully a future generation of the Framework 12 will be a real upgrade...
    • This could exactly be how our Sun ends but it's not as simple by Sayan Sen Image by Drew Rae via Pexels An international team led by Université de Montréal (University of Montreal) PhD student Érika Le Bourdais has found that the ancient white dwarf star LSPM J0207+3331 is still pulling in planetary debris, even though it has been cooling for about three billion years. White dwarfs are dense, Earth-sized stellar remnants left behind when Sun-like stars exhaust their nuclear fuel and shed their outer layers. The star, located 145 light-years away in the constellation Triangulum, is the oldest and coldest white dwarf known to have a surrounding disk of dust. The star was first spotted in 2019 by a citizen scientist through the Backyard Worlds: Planet 9 project. Its cool temperature immediately suggested that it was very old, since white dwarfs gradually lose heat over time. Using the W. M. Keck telescopes in Hawaii, astronomers later confirmed that the star shows infrared signals consistent with dust rings formed by asteroids breaking apart under its strong gravity. Such infrared excesses occur when a star emits more infrared light than expected, often because warm dust surrounding it absorbs and re-radiates energy. “This discovery challenges our understanding of planetary system evolution,” said Le Bourdais. “The fact that we still see planetary debris being accreted three billion years after the star became a white dwarf suggests that asteroids, comets, and even planets can remain in orbit around these stars for a very long time.” Spectroscopic analysis—a technique that studies light to identify the chemical elements present in an object—revealed thirteen heavy elements in the star’s atmosphere: sodium, magnesium, aluminium, silicon, calcium, titanium, chromium, manganese, iron, cobalt, nickel, copper, and strontium. Normally, heavy elements sink quickly in hydrogen-rich white dwarfs, making them hard to detect. “We expected to see only a few elements, but we found dozens!” explained Le Bourdais. The research paper adds more detail. The absence of carbon features suggests the debris came from a carbon-volatile-depleted source. The abundance pattern shows slight deficits of magnesium and silicon compared to iron but otherwise resembles Earth-like material. This points to a differentiated rocky body—one whose materials have separated into distinct layers such as a metallic core and rocky mantle—with a metallic core fraction higher than Earth’s. In other words, the star is accreting the remains of a large rocky object, similar in structure to Earth or the asteroid Vesta. “White dwarfs offer one of the only ways we can directly measure the composition of exoplanets,” said Patrick Dufour, co-author and professor at Université de Montréal. “When planetary debris come too close, they are torn apart by the star’s gravity and end up polluting its atmosphere, leaving a detailed chemical fingerprint of its composition.” The team also detected weak Ca II H & K line core emission, making this only the second known isolated polluted white dwarf to show this feature. These are specific spectral signatures produced by ionised calcium and can indicate unusual physical activity in a star’s upper atmosphere. The finding suggests that extra physical processes may be happening in or above the star’s upper atmosphere. The study stresses the importance of including heavy elements in model atmosphere calculations, since leaving them out can distort the inferred structure and lead to inaccurate stellar parameters. Earlier work suggested the star’s infrared excess came from two dust rings. The new analysis shows that a single silicate dust disk—a ring composed largely of rock-forming minerals rich in silicon and oxygen—can explain the observed signal at 11.6 μm, simplifying the picture of the system’s structure. The question of how debris ended up falling into the star so late remains open. One idea is that giant planets in the system slowly destabilised smaller bodies over billions of years. Another possibility is that a passing star disturbed the orbits of debris. “Future observations with the James Webb Space Telescope or archival data found in the European Space Agency’s Gaia mission could help distinguish between a planetary rearrangement and the gravitational effect of a close stellar encounter,” said John Debes, co-author and researcher at the Space Telescope Science Institute. Dufour noted that hydrogen-rich white dwarfs are the most common type, and the coolest among them are the oldest stars in the galaxy. “We didn't have the habit of looking for signs of accretion in them. This unique case motivates us to expand our search to more of these stars.” The findings show that even after billions of years, planetary systems can remain active and complex. Substantial accretion events—the gradual accumulation of surrounding material onto a celestial object—can still occur long after a star’s death, offering a rare window into the composition and fate of distant worlds. Source: University of Montreal, IOPScience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Doesn't DDG mainly use Bing?
  • Recent Achievements

    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
    • Apprentice
      JoeyNeo went up a rank
      Apprentice
    • Week One Done
      oliviaexpo earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      485
    2. 2
      PsYcHoKiLLa
      228
    3. 3
      Skyfrog
      70
    4. 4
      FloatingFatMan
      58
    5. 5
      neufuse
      56
  • Tell a friend

    Love Neowin? Tell a friend!