Crap articles and moderators...


Recommended Posts

Neowin aint what it was 9 - 10 years ago that's for sure. Maybe it's because I was younger, but I remember news stories being limited to actually new WORTHY stories. I also remember it being alot less strict, it seemed people called talk about more liberal things etc. I suppose this added strictness could come with the site getting bigger and having more responsibility though....

Naziitistic may no be the best way to put it lol, but it's the right direction. It seems now people get warnings and posts deleted allot more easily and the mods are generally more sensitive and less open minded. I don't particularly care, as I mainly come here when I need an answer to a question or just to browse areas of my interest and laugh at people getting worked up over posts etc., it's just something I have observed and you can't really single anything out as an example because it's happened so gradually over a wide space of time.

Also I understand you don't need a whole mountain of comments posted each saying an article has it's facts wrong, but surely you need a few people to post that it's wrong, otherwise people won't know it's wrong until Neowin gets round to changing it.

If your just stating the facts about an article, whether disproving it or not, this surely still counts as discussion, and can be discussed....

edit: don't get me wrong, i'm not hating, Neowin's still my favourite place for anything geek related

If your just stating the facts about an article, whether disproving it or not, this surely still counts as discussion, and can be discussed....

It's not about quantity, but quality. There's a difference between "This writer sux" and "I think the facts might be wrong because xyz" I'm pretty sure those aren't getting deleted. One sparks meaningful discussion/corrections, one wants attention.

Tzvi I think what you're saying is completely incorrect, recently Neowin seems to be focussing on content over quality. In this thread you all seem to be ignoring the feedback your getting and just saying 'use the report button'. None of you have acknowledged that the quality has decreased in the past year or so, people seem to be writing ****ty articles just for the pay check.

There has to be some form of quality control in place as well as fact checking - so many articles recently have been incorrect / silly spelling errors. I'd point them out - but oh wait all the comments have been deleted? lol To be honest I'd go through and highlight them all but it's 2340 so .. night.

It's not about quantity, but quality. There's a difference between "This writer sux" and "I think the facts might be wrong because xyz" I'm pretty sure those aren't getting deleted. One sparks meaningful discussion/corrections, one wants attention.

That statement alone implies censorship without solid criteria. You just leave to the moderator to determine what's "meaningful discussion" and what's not. And with that criteria you're assuming that the quality of all the articles is good enough to warrant 'meaningful arguments', which is not the case.

And by the way, when people comment or point out typos, at least they can get replies. The report button is this obscure thing and the only way of knowing your message got through, is when the article is corrected. IF it's corrected.

Tzvi I think what you're saying is completely incorrect, recently Neowin seems to be focussing on content over quality. In this thread you all seem to be ignoring the feedback your getting and just saying 'use the report button'. None of you have acknowledged that the quality has decreased in the past year or so, people seem to be writing ****ty articles just for the pay check.

I'm pretty sure the topic of discussion is why we're deleting critical comments. The answer is that for most simple grammatical/misspell mistakes, the proper course of action is to use the report button. It is more effective, and keeps the comments section cleaner. If you think the writing is just horrible in general, I'm sorry to hear that. We're always trying to improve where we can.

There has to be some form of quality control in place as well as fact checking - so many articles recently have been incorrect / silly spelling errors. I'd point them out - but oh wait all the comments have been deleted? lol To be honest I'd go through and highlight them all but it's 2340 so .. night.

We won't catch everything. That's assumed. We actually depend a lot on the reports system to fix our own fails. We appreciate all the reasonable feedback from that tool, and we fix everything as quickly as possible. If you want the site to be better, use the tool and help us. We aren't perfect.

That statement alone implies censorship without solid criteria. You just leave to the moderator to determine what's "meaningful discussion" and what's not. And with that criteria you're assuming that the quality of all the articles is good enough to warrant 'meaningful arguments', which is not the case.

I'm not a moderator, so i can't comment on specifics, but it isn't random. There are definitely criteria, and the mod team is trusted to uphold certain standards of moderation. That's what they're hired for.

And by the way, when people comment or point out typos, at least they can get replies. The report button is this obscure thing and the only way of knowing your message got through, is when the article is corrected. IF it's corrected.

Well, isn't that the point? I hear what you're saying, recognition is nice, and maybe that's a feature we can implement down the line, but the response is almost always "fix'd". Is that what you would want?

Tzvi I think what you're saying is completely incorrect, recently Neowin seems to be focussing on content over quality. In this thread you all seem to be ignoring the feedback your getting and just saying 'use the report button'. None of you have acknowledged that the quality has decreased in the past year or so, people seem to be writing ****ty articles just for the pay check.

There has to be some form of quality control in place as well as fact checking - so many articles recently have been incorrect / silly spelling errors. I'd point them out - but oh wait all the comments have been deleted? lol To be honest I'd go through and highlight them all but it's 2340 so .. night.

We definitely do not do this for the pay check. I can tell you that much. Please cite your "content over quality" - you can't make these kinds of rash accusations without backing it up. Edit: You know Engadget and Giz make mistakes too right? They're just caught faster because people a) Report them b) They have an entire team dedicated to this.

On the "ignoring feedback" topic you are incorrect here. We accepted your feedback, and have told you our procedures. I'm confused as to how we're ignoring it when we're telling you how to rectify the issue.

We won't catch everything. That's assumed. We actually depend a lot on the reports system to fix our own fails. We appreciate all the reasonable feedback from that tool, and we fix everything as quickly as possible. If you want the site to be better, use the tool and help us. We aren't perfect.

This. (Y)

[...]

And by the way, when people comment or point out typos, at least they can get replies. The report button is this obscure thing and the only way of knowing your message got through, is when the article is corrected. IF it's corrected.

The comment section isn't the right place to mention any typos or other errors. In fact, it's not a good way to mention it at all. With the report system, there's an entire section dedicated to reported issues which can be seen by the staff to be handled accordingly.

I anybody copy/pastes, we sic lyle on them

What about NOT copypasting, but trying to pass something as news when it was first reported by someone else, without giving proper source? I mean I REALLY doubt any news is copypasted, but there's the typical case of news spreading like wildfire all over the net that are way too random to have been discovered at the same time by different 'news sites' like neowin. Properly citing the source doesnt hurt

I've been on both sides of the fence. The guys at Neowin do a good job and for no charge to you. I have posted comments (since I stepped down as admin) and some have been removed and yes it's frustrating for these to be removed as an ordinary member. I've also witnessed people bomb my stories at Neowin with stupid comments and that's even more annoying. No-one likes criticism but it's always best to take it on the chin and move along.

What about NOT copypasting, but trying to pass something as news when it was first reported by someone else, without giving proper source? I mean I REALLY doubt any news is copypasted, but there's the typical case of news spreading like wildfire all over the net that are way too random to have been discovered at the same time by different 'news sites' like neowin. Properly citing the source doesnt hurt

We do cite the source, we just do it inline, many others do this, and it looks tidier.

I've been on both sides of the fence. The guys at Neowin do a good job and for no charge to you. I have posted comments (since I stepped down as admin) and some have been removed and yes it's frustrating for these to be removed as an ordinary member. I've also witnessed people bomb my stories at Neowin with stupid comments and that's even more annoying. No-one likes criticism but it's always best to take it on the chin and move along.

(Y)

What about NOT copypasting, but trying to pass something as news when it was first reported by someone else, without giving proper source? I mean I REALLY doubt any news is copypasted, but there's the typical case of news spreading like wildfire all over the net that are way too random to have been discovered at the same time by different 'news sites' like neowin. Properly citing the source doesnt hurt

There was this same discussion months ago about this topic:

https://www.neowin.net/forum/topic/986524-please-neowin-start-linking-sources-properly/

My take is that some other sites place source links at the bottom, as what they actually write on their end is a small blurb (which more often than not tends to be sarcastic and humourous).

Agreed. I called a person a name ONCE a year or so back and I get a warning against me and my post edited/deleted. I see people doing it all the time and their posts are not removed at all.

There is a button called "Report" plus that mods here have real life too and can't be active 24/7 just to check every bad word on the forum. Most of the time when we delete, edit or warn users we get those reports from the users here in Neowin.

Next time report it and see what we do about it.

To get on the point immediately, what's up with you guys lately deleting comments that suggest a news post / article is wrong / crap? We can't give feedback anymore?

EDIT: Also, why not add a dislike button too?

I don't think "Crappy article is crappy." stands as 'feedback', but more bashing the author. This only leads to further negative comments from other members.

If anyone has an issue with the author/article, just shoot them a PM and explain why. Stating "Crappy article is crappy." isn't exactly leaving us with much to work off of. I've received an email in the past where someone told me to "f-off" and that my "article sucked". I immediately replied once I read it and asked why, turns out the sender was 'under the influence' and apologized.

It's really easy to tell somebody they suck, or a company sucks, or a certain product sucks, but hardly anyone explains why.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!