Monitor shootout for new system Samsung vs. Asus vs. LG thoughts?


Recommended Posts

Monitor shootout for new system Samsung vs. Asus vs. LG thoughts? Discussion re what you use for gaming monitors/ your monitor brand of choice. Looking for 3 monitors for a tri monitor system. Use for gaming 1080p support needed no 3d support or touch needed (won?t rule out one of the monitors being touch screen but I?m leaning away from the idea). Other brands considered (dam you Sony for not creating dedicated pc monitors). Current thoughts include but are not limited to http://www.amazon.co.uk/Samsung-PX2370-Widescreen-Monitor-Charcoal/dp/B00388Y7I2/ref=cm_cr_pr_product_top and the Asus ?Designo? series and any decent looking and spec good LG. Suggestions as had never had a desktop before and have no idea where to start? Monitor looking stylish would be good but specs come first. Would respect and appreciate any help.

LG sells their good panels and only use the crap ones for their own monitors. out of those three choices I wouldn't pick any one of them. then again, my next monitor I won't be buying one until I can get a good IPS (not the cheapest, but the next step up, anything higher is just to expensive).

LG, as far as i am concerned they are the best I have seen.

You have one, what makes then so good in your eyes (slight pun there given were talking monitors) would you care to quote your model?

LG sells their good panels and only use the crap ones for their own monitors. out of those three choices I wouldn't pick any one of them. then again, my next monitor I won't be buying one until I can get a good IPS (not the cheapest, but the next step up, anything higher is just to expensive).

I assume by panel you mean TV panel? Ok what would you pick? ISP?

I managed to get 2 HP 2310m monitors for 150 each. they are pretty nice. there is edge bleeding of course but it's not noticeable unless the screen is completely black. I love the reflective panel and the way it presents the picture. my older monitor is a samsung that's 3-4 years old. i didn't know i was missing anything until i put it next to the HP.

I bought a very expensive Asus monitor a few weeks ago and tested it out, i wasn't impressed at all. I love their thinish frame specially for multiple monitors but i couldn't stand paying so much for colors that weren't so great compared to my HP.

IPS Monitors are the way to go these days, and games responsiveness on them are actually fine really.

Thanks a lot of them seems to have very similar specs these days and most IPS (I have now looked it up) is the general rule for gaming still don?t go for 5ms go for 2m or under? Does it really matter?

I managed to get 2 HP 2310m monitors for 150 each. they are pretty nice. there is edge bleeding of course but it's not noticeable unless the screen is completely black. I love the reflective panel and the way it presents the picture. my older monitor is a samsung that's 3-4 years old. i didn't know i was missing anything until i put it next to the HP.

I bought a very expensive Asus monitor a few weeks ago and tested it out, i wasn't impressed at all. I love their thinish frame specially for multiple monitors but i couldn't stand paying so much for colors that weren't so great compared to my HP.

Edge bleeding not something I know of on my laptops. Do you know if the HP 2310m is on sale in the UK can?t seem to find it on Amazon UK. Oh and what Asus was it I was looking at some of their new range so would be useful to know what you were looking at.

+1 Any IPS would probably be a good bet.

Yep narrows it down lol not seems a lot of monitors have no USP these days.

samsung ftw.................

Thanks for that, I know this is the older model but what do you or anyone else knows of the http://www.amazon.co.uk/Samsung-PX2370-Widescreen-Monitor-Charcoal/dp/B00388Y7I2/ref=pd_cp_computers_2 PX2370? I guess you might not have this one (state your model won?t you?) Anyone got any reviews of the PX it?s my front runner right now.

Thanks a lot of them seems to have very similar specs these days and most IPS (I have now looked it up) is the general rule for gaming still don?t go for 5ms go for 2m or under? Does it really matter?

You can safely ignore the ms values on pretty much any monitor today. anything 16 or below is fast enough that you won't notice it, and is more than fast enough for gaming.

And on top of that, a 12 ms IPS monitor will in reality be just as fast as a 2-5ms TN monitor, it's only the TN monitor will either be that fast and have crappy colors, or it will have decent colors, but in reality be a 12ms monitor, but in the testign they cheap and only measure white to grey, instead of proper white to black to white.

low ms values only mean that you won't have good saturated colors because the panels is set up to never reach full saturation.

You can safely ignore the ms values on pretty much any monitor today. anything 16 or below is fast enough that you won't notice it, and is more than fast enough for gaming.

And on top of that, a 12 ms IPS monitor will in reality be just as fast as a 2-5ms TN monitor, it's only the TN monitor will either be that fast and have crappy colors, or it will have decent colors, but in reality be a 12ms monitor, but in the testign they cheap and only measure white to grey, instead of proper white to black to white.

low ms values only mean that you won't have good saturated colors because the panels is set up to never reach full saturation.

Thanks so open question for all. Other than the ms ips and res what other factors should I be taking into account for a modern gaming monitor just tft vs. LCD? Other than that aesthetics?

TFT is a kind of LCD.

Here's what you should look for/ignore: http://www.maximumtech.com/display-myths-shattered-how-monitor-hdtv-companies-cook-their-specs

tl;dr: if you're getting an IPS panel, you can't go wrong with any since even the low-end IPSes are superior to any TN monitor you can get. Someone made a thread recently that should help you within the IPS choices https://www.neowin.net/forum/topic/1004870-2324-ips-monitor-poll/

TFT is a kind of LCD.

Here's what you should look for/ignore: http://www.maximumtech.com/display-myths-shattered-how-monitor-hdtv-companies-cook-their-specs

tl;dr: if you're getting an IPS panel, you can't go wrong with any since even the low-end IPSes are superior to any TN monitor you can get. Someone made a thread recently that should help you within the IPS choices https://www.neowin.net/forum/topic/1004870-2324-ips-monitor-poll/

Thanks reading. Can anyone give me a mini check over on the specs of these I?ve look at reviews all sing its praises so it seems I can't decide if I even like the look of it rather like a net top screen. http://www.asus.com/Display/LCD_Monitors/MS246H/

  • 1 month later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Thank god they got rid of the disgusting looking sidebars, and the corner radius looks much better, too. Two things I hated on day one, and never got used to.
    • JetBrains launches Rider 2026.2 EAP 5, bringing several AI improvements by David Uzondu JetBrains has released the fifth EAP version of Rider 2026.2, bringing a faster startup flow with the new non-modal startup screen and quality-check hooks for Claude Code and Codex. In the latest EAP release, Rider now has newly bundled "quality-check" hooks that run background tests on code edits before the external agent proceeds. For example, after Claude Code rewrites a class, Rider immediately triggers a PostToolUse hook that analyzes the code for syntax errors and formatting warnings. It then passes those findings back to the model as feedback, allowing the agent to fix its own output before finalizing the task. If Rider detects compilation errors, the IDE prevents the agent from treating the task as complete, while minor formatting warnings simply help guide the model toward better output. The "Explain with AI" feature can now tackle tricky build errors directly from the console, helping .NET developers who frequently wrestle with multi-targeting failures and MSBuild errors. JetBrains introduced Explain with AI back in the 2024.1 release cycle. With this feature, instead of forcing developers to copy long diagnostics into a separate chat window, Rider now lets you trigger these explanations directly from the error source. In similar EAP news, JetBrains recently opened the first EAP for IntelliJ IDEA 2026.2, with features that appeal to both those who are into AI-assisted coding and those who prefer "classic" manual development. For manual developers, the release adds revamped dependency completion for Maven and Gradle build scripts, which pulls data directly from the local cache to suggest relevant versions. It also brings the Spring Debugger update, displaying security indicators next to endpoints to visualize secured routes during runtime. In addition to database migration tools for Flyway and Liquibase, this build introduces a Hibernate debugger that shows the exact SQL or HQL queries that the framework plans to execute, letting developers jump directly to the Java code that triggered them.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      PsYcHoKiLLa
      222
    3. 3
      ATLien_0
      87
    4. 4
      Steven P.
      80
    5. 5
      +Edouard
      80
  • Tell a friend

    Love Neowin? Tell a friend!