Recommended Posts

The Windows 8 blog advises the Developer Preview will NOT support an upgrade install.

I've got Win7 Ultimate, and I'll be installing the Preview as a VM in VirtualPC myself. That makes it eminently "disposable"

While the safest route would be to dual boot, I definitely do believe that it will be stable enough to run as primary OS.

Remember Win7 developer build? That was stable right from the start and never went back to Vista at the time.

I seem to recall a Windows 7 bug that destroyed MP3's, so no, it was not stable from the start. :rolleyes:

Edit: Well, after reading the rest of the thread, Denis W seems to have already pointed this out. :whistle:

Labels, not letters. Windows does the letters. And if you don't label them, they're just called Local Ha....never mind, what the heck am I doing?

Honestly don't know what you're getting worked up about. Does it affect you in any way that someone else isn't labeling their drives on their computer?

The Windows 8 blog advises the Developer Preview will NOT support an upgrade install.

I've got Win7 Ultimate, and I'll be installing the Preview as a VM in VirtualPC myself. That makes it eminently "disposable"

I'll be doing both bare-metal and VM-based installs; however, the bare-metal install will be on a different drive from my existing Windows 7 install (I have a drive more than large enough for this).

The VM installs will be a straight bitness shootout (x32 vs. x64) with identically-configured VMs - the bare-metal install is for comparison against 7 x64 with SP1.

However, notice that I said *drive* - not partition. The Windows 7 drive won't even be physically connected during the installation of the Developer Preview.

I'll be doing both bare-metal and VM-based installs; however, the bare-metal install will be on a different drive from my existing Windows 7 install (I have a drive more than large enough for this).

The VM installs will be a straight bitness shootout (x32 vs. x64) with identically-configured VMs - the bare-metal install is for comparison against 7 x64 with SP1.

However, notice that I said *drive* - not partition. The Windows 7 drive won't even be physically connected during the installation of the Developer Preview.

That sounds like a sensible approach. I'm studying for 70-686 this week, so I might try a few test deploys to VMs, but I'll wait for a beta before I can bothered with a physical drive.

Is the OP's question a joke ?? Please say yes.

No it wasnt a joke, I my roommate during training used Windows 7 Pre-builds and betas as his primary OS and never encountered any issues, I was wondering myself.

However now I'm going to make a partition to dick around with it.

How much space would you recommend for a partition to install W8 on? I'm using a laptop with about 250gb HDD - 30gb goes to the main OS and programs and the rest goes to data.

Would 20gb be enough just for a little tinker around?

I intend to dual boot.

Thanks in advance :)

Would 20gb be enough just for a little tinker around?

If you get the one without Visual Studio/Blend/etc, I don't see why it wouldn't. No guessing on the other one, Visual Studio can be pretty hefty depending on what they included, plus they said there's samples and a ton of other materials too.

  • Like 2

You know what you can always do...

Install Windows 8 to a VHD. It's just a file on any disk you want, it's easy to replace and to delete, and it works perfectly :)

Steps will be the same as you did for installing Windows 7 on a VHD.

Guide: http://forums.techarena.in/guides-tutorials/1175447.htm

  • Like 2

Cheers Ambroos - I've seen VHD files before, and obviously forgot about them. This could be a better solution for me.

Just had a quick skip through the install instructions and it says to make about 7gb available on your physical drive.

Does this mean I have to store the VHD on my C drive? This drive is only 30gb in size and is pretty much full. Also, I don't want to uninstall any of my programs to make space as I need them all.

Could I place the VHD in my D drive, where there is much much more available space or will this not work?

Thank you.

You know what you can always do...

Install Windows 8 to a VHD. It's just a file on any disk you want, it's easy to replace and to delete, and it works perfectly :)

Steps will be the same as you did for installing Windows 7 on a VHD.

Guide: http://forums.techar...als/1175447.htm

That's great tip and I was just thinking about doing that :)

Thanks for the link

That sounds like a sensible approach. I'm studying for 70-686 this week, so I might try a few test deploys to VMs, but I'll wait for a beta before I can bothered with a physical drive.

The only reason I'm going the bare-metal route is because I actually have a spare drive more than big enough.

I'll also be doing VM installs in both 7 x64 and the Developer Preview, comparing VPC with Hyper-V.

That comparison is warranted for two reasons - first off, Hyper-V replaces XPMode/VPC 7; second, Hyper-V as a *desktop application* has real competition - namely, VirtualBox. While both are free, VPC7 has usability issues compared to VirtualBox, especially for non-Windows guests - does Hyper-V address this even a little by comparison?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you still click his nose in the about box?
    • In that case this product has no value to me. I'd rather use older Creative SB that were better in my opinion or onboard audio chip.
    • FxSound 1.2.9.0 / 1.2.10.0 Beta by Razvan Serea FxSound (formerly DFX Audio Enhancer / FxSound Enhancer) is now free, making high-quality audio enhancement accessible to everyone. Designed for all PC sound systems, from average setups to audiophile-grade equipment, it offers automatic or fully customizable processing. As automatic or customizable as you want, it utilizes the highest-grade processing to deliver more volume, better equalization, and a wider, deeper sound. For the serious audiophiles, FxSound gives you the tools to adjust the FxSound Effects and EQ to your exact preferences. Turn FxSound on and immediately hear the difference in sound quality. FxSound is ideal for budget audiophiles, music lovers, gamers, transcriptionists, Netflix enthusiasts, and more. It’s particularly beneficial for those relying on quiet laptop speakers or low-quality audio hardware. As a free tool, FxSound excels in boosting volume, enhancing bass, and improving sound quality. No other free EQ for Windows matches its ease of use. FxSound Is Now Completely Free and Unrestricted FxSound Pro is now free for everyone, not just those who can afford it. Get free and unrestricted access to better sound today. FxSound is now entirely supported by users. Click here to donate to help fund continued development and improvements to FxSound. FxSound 1.2.9.0 changelog: Auto save preset when Equalizer or Effects settings are changed Reset to factory defaults can reset the unsaved preset changes Settings dialog UI improvements for Audio and Equalizer sections Output device list is now displayed in the device preference order Preset is selected immediately when the preset for an active output device changes from settings Fixes and improvements in preferred output device selection Fixed crash issue #487 Fixed preset not getting applied and EQ flat after update (#403 and #472) Fixed system audio device not being restored on reboot (#483) Fixed preset export and import dialogs not shown when always on top is enabled Fixed audio not being restored on exit after the preset save dialog Fixed FxSound on/off handling on Windows session changes FxSound 1.2.10.0 Beta changelog: Command line options can now be applied to an already running instance of FxSound Command line option added to launch FxSound minimized to the system tray Fixed output device not being changed through hotkeys when FxSound is off (#524) Individual hotkeys can now be disabled with Delete key (#515) Fixed the but to prevent invalid hotkeys from being registered (#523) Bluetooth devices removed from device settings are removed from device preference list Fixed device detection failures Fixed application hang when retrieving the audio mix format fails Fixed presets import dialog file name combo box text alignment Fixed output device not being applied through command line Fixed a delay blocking application load when minimizing to the system tray Fixed EQ band sliders not refreshing when switching number of bands (#521) Fixed user-set mute being overridden by FxSound Fixed icon visibility in ARM64 version Finnish language support added Corrected Persian translations Download: FxSound 1.2.9.0 | ARM64 | ~70.0 MB (Open Source) Download: FxSound 1.2.10.0 Beta | ARM64 View: FxSound Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      470
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      109
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!