Recommended Posts

I understand there is already a thread on the old start menu thing, but it is already 6 pages and counting, I guess if I post it there, after a few pages more, then nobody would find the trick.

I try to add a few things on 8102, and hopefully add a few more later, but first thing first:

1. To get back the old start menu, open regedit, goto

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer

change value of RPEnabled from "1" to "0"

close regedit, you get your old start menu......the catch is, no more metro UI because you just disabled it. To get back the Metro UI, change the value back to "1"

I had ran thru the other thread, and agree with some members : this is progress, try to adapt to it, use the old thing as a temporary way until you get use to Metro.

screen739.jpg

2. Install on Hard-disk to dual boot with win7

Do-not try to install 8102 within win7, it won't ask you which partition you want to install, and go stright to install on C, and your win7 is gone.

You need to burn the ISO to a DVD or USB FD, boot with it, then set-up will ask you for the partition, everything goes like win7 installation.

3. Dual/multi-boot with XP

8102 still uses BCD but it doesn't care about XP, so after 8102 is installed, use VistaBootPro to install the "Vista Bootloader" back to the system partition, then set-up the bootmenu with VistaBootPro.

Of course you can use EasyBCD, I don't want to install it just to show the basically similar procedures.

screen738.jpg

Update 1:

Actually you can install inside win7(or other windows) and it is very simple: After mounting to a virtual CDrom, people tend to fire up the setup.exe on the root dir, and it will cause win8 setup to install directly on C, and put the win7 in windows.old.

The correct way is to go to the sources folder, there is another setup.exe in it, and firing up this exe file will begin install by asking you the partition to install.

Update 2

If you are one of those unlucky chap who installed 8102 over win7, and must have to get the win7 back, here is the MS tech page on how to restore XP from win7. I have not tried but read over the article, the steps should basically be the same:

http://support.microsoft.com/kb/971760

Update 3

screen740.jpg

Link to comment
https://www.neowin.net/forum/topic/1025334-a-few-hints-tricks-for-build-8102/
Share on other sites

change value of RPEnabled from "0" to "1"

Haven't tried this one myself (actually enjoying the new interface), but nice to see you can disable a ton of whining with a simple registry edit ;) Wouldn't it be changing 1 to 0 though?

  • Like 2

[. . .]

I had ran thru the other thread, and agree with some members : this is progress, try to adapt to it, use the old thing as a temporary way until you get use to Metro.

[. . .]

There is no way they can get used to it if they disable it completely. The best option would be for them to just try the Immersive experience for a month or two.

Can anyone confirm this? Love to share it with our readers if I can get confirmation :)

Why? It's not an official option within the operating system, and it will just lead to more people not getting used to the new Immersive experience, meaning they will continue to complain when it is finally released. As the Start Menu will most likely not return, it'd be better to encourage all users to try to get used to it :)

Haven't tried this one myself (actually enjoying the new interface), but nice to see you can disable a ton of whining with a simple registry edit ;) Wouldn't it be changing 1 to 0 though?

Yeah, thanks, amended. :rolleyes:

There is no way they can get used to it if they disable it completely. The best option would be for them to just try the Immersive experience for a month or two.

Why? It's not an official option within the operating system, and it will just lead to more people not getting used to the new Immersive experience, meaning they will continue to complain when it is finally released.As the Start Menu will most likely not return, it'd be better to encourage all users to try and get used to it :)

I agree, some may still use the old menu "forever". But this trick will be known thru other channels, one way or the other, there's no secret in the web, I am not the only guy to know it........, a MS guy told me this trick. :laugh:

Hint : If you are installing on vmware workstation and get the nasty message "windows cannot read the <productKey> setting from the unnattend answer file", just disable the floppy drive on the vmware settings.

:-D

tried with VmWare Workstation 8, Windows Developer Preview 8 x64 as Guest, Windows 7 professional x64 as Host

I can see why some would want to use the old start menu, but honestly I barally use the thing as it is right now in Win7. The apps I'm always using are just pinned to the taskbar, as such having those pinned to the start screen is the same thing.

One thing they need to do is add things the start screen is missing atm. Lots of people want to be able to close metro apps without having to do it through task manager, I suppose this will come in the beta and that right now MS wants to show you how the OS manages those apps on it's own, like on WP7 etc.

Also unless you have a old desktop app open then I don't think Alt+Tab works between metro apps, this should be added, OR I expect they could be working on a WP7 like task switcher when inside the start screen UI. I say this because, though it's not in this build that we got, they demoed in the keynote that you can zoom out on the start screen to move whole tile groups around and to also jump between them etc. That option would work well for apps also, you can do it with touch, zoom out with pinching etc to get a row of open apps (like Alt+tab shows basically) then you pick the one you want. This can also be done with a KB shortcut (just keep it as Alt+tab) and arrow keys or the mouse.

Really, that's all that's missing imo. A better close option and then app switching inside the new UI.

My screen-shot is proof, but I changed it back to Metro, I like new things. :laugh:

I have the standard desktop as an app (basically, the default), but I'm sticking to Immersive, despite having a traditional (but wireless) keyboard and mouse (the keyboard is Microsoft's Wireless 6000 V.3, the mouse is the Logitech V220).

So far, I have not run into any 7-isms with either applications or drivers; if 7 x64 supports a driver or application, so does the Developer Preview. I haven't needed to use Compatibility Mode so much as once.

Office 2010 (x64) is installed (mounted the ISO and installed that way); it also updates (via WU) just fine (I just applied SP1, in fact).

I can see why some would want to use the old start menu, but honestly I barally use the thing as it is right now in Win7. The apps I'm always using are just pinned to the taskbar, as such having those pinned to the start screen is the same thing.

One thing they need to do is add things the start screen is missing atm. Lots of people want to be able to close metro apps without having to do it through task manager, I suppose this will come in the beta and that right now MS wants to show you how the OS manages those apps on it's own, like on WP7 etc.

Also unless you have a old desktop app open then I don't think Alt+Tab works between metro apps, this should be added, OR I expect they could be working on a WP7 like task switcher when inside the start screen UI. I say this because, though it's not in this build that we got, they demoed in the keynote that you can zoom out on the start screen to move whole tile groups around and to also jump between them etc. That option would work well for apps also, you can do it with touch, zoom out with pinching etc to get a row of open apps (like Alt+tab shows basically) then you pick the one you want. This can also be done with a KB shortcut (just keep it as Alt+tab) and arrow keys or the mouse.

Really, that's all that's missing imo. A better close option and then app switching inside the new UI.

Alt+Tab certainly *does* work, between Metro/Immersive apps, Classic apps, or any combination. Creative's software updates are a good example of Classic apps, while IE 10 by default is Immersive/Metro - at one point, I had Creative AutoUpdate running, IE10 desktop, IE10 Immersive, and Windows Explorer all open, and Alt+Tabbed between them as needed. (That's right - IE10 desktop *and* IE10 Immersive; you CAN run both at once. In fact, if you launch IE via the Run line, it starts in Immersive, even if you have a separate IE10 desktop session running.) I haven't even *used* Task Manager.

Actually if the metro UI will be there by default I guess instead of getting myself used to it, will be the moment I finally switch to Linux.The thing looks so ugly to me.They should have added something like multiple desktops, or infinitely scrolling desktop, but the metro just seems so wrong to me, atleast the way the tiles look.

nice one... Although, i came up with an issue installing 8102 on my OCZ Vertex 2 SSD.... it would not recognise the drive... had to haul out a 160Gb SATA HDD to get 8102 installed.... that was kind of odd!

Actually if the metro UI will be there by default I guess instead of getting myself used to it, will be the moment I finally switch to Linux.The thing looks so ugly to me.They should have added something like multiple desktops, or infinitely scrolling desktop, but the metro just seems so wrong to me, atleast the way the tiles look.

And you actually think the learning curve there will be any easier?

Consider GNOME, or UNITY, or even Wayland - all have a higher learning curve than even Metro does from a user point of view.

All the keyboard tricks from as far back as Windows 9x/NT still work - even within Metro. If you're even a halfway-competent keyboard jockey, Metro/Immersive can be dealt with quite easily - even without touch support.

Something I said (elsewhere) is coming true - far too many of us may SAY we want change; yet, when confronted with it, we become very Pharonic in our attitudes and insist on staying put.

And it doesn't seem to matter whether it's applications, games, operating systems (including FOSS), and even politicians.

Far too many of us don't want new - what we REALLY want is *improved old*, and with as little real change as we can get away with.

I've installed it so far. I've ran into no bugs except, Internet Explorer crashes after every 10-30 seconds of use, and refuses to load web pages without crashing constantly, however this bug doesn't effect me much since I use a different browser anyway. I'm not sure what's causing it. Skype finally worked after I downloaded the new version, strangely the online installer they issued me from their download page of the official site seems to install 5.3.XXX, this didn't have Windows 8 support so it didn't sign up properly. It was fixed after I found an offline installer of a newer version 5.5.XXX, which had support for the new OS. I think disabling the start menu to the old one has also cured my hatred for how ugly the ribbon has been implemented in the explorer frame. I think that direction is pretty risky since I liked how it is disabled.

Other than that, it's pretty solid, no real complaints really, I knew I was downloading pre-released software, and it's running better than pre-released software does. I think there's a lot of work to be done, but the main ideas are there and the direction is clear. I hope they don't have that metro panel as a default for computer based users as I think it should be kept on touchscreen devices. Would people choose to use that IE instead of desktops IE? But yes, I know it's pre-released software and that it'll probably be changed in the future, but I just wanted to jot down at least one fault imo, but I do realise they are trying to show the new metro UI.

And you actually think the learning curve there will be any easier?

Consider GNOME, or UNITY, or even Wayland - all have a higher learning curve than even Metro does from a user point of view.

All the keyboard tricks from as far back as Windows 9x/NT still work - even within Metro. If you're even a halfway-competent keyboard jockey, Metro/Immersive can be dealt with quite easily - even without touch support.

Something I said (elsewhere) is coming true - far too many of us may SAY we want change; yet, when confronted with it, we become very Pharonic in our attitudes and insist on staying put.

And it doesn't seem to matter whether it's applications, games, operating systems (including FOSS), and even politicians.

Far too many of us don't want new - what we REALLY want is *improved old*, and with as little real change as we can get away with.

There is a considerable problem in the current build with little to no consistency in between the two desktops. It randomly jumps between one and the other at the most inopportune times, and it's an incredible pain in the ass and is massively confusing. I know I'm not the only one because this very same argument has been stated in reviews as well. As it currently stands in the preview build, I do believe the learning curve is higher than with GNOME or UNITY. Wayland by the way isn't a Desktop Environment. It's a display server that lets you run DE's like GNOME or UNITY on it.

Little thing I found when installing it as I downloaded the full iso image 4.8GB or whichever wouldn't fit on standard DVD so went the USB route but was too lazy to do whole manual copying and making USB stick bootable so tried using the Windows 7 USB software from Microsoft and what do you know, it works so if anyone's in similar boat it's easiest solution.

For better navigating the startscreen with a keyboard/mouse: press pageup/pagedown to swipeleft/swiperight. Home/end will also work.

The scroll wheel moves the start screen back and forth as well. I have no idea why they don't have mouse dragging. :/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some do not plug in at all and instead get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
    • is that a personal preference? whether it is or isn't, i get where you're coming from. i try to get and use fully open sourced applications whenever i can but there are instances where i find a superior product that is closed sourced. in these cases i do my best to learn about the company, who operates it, their background, parent and sub structure etc. to some extent, depending on "the smell test". i really believe that Syncback is really and truly something great. even if you don't use it, it's always worth a recommendation to someone else, especially if that someone else is not very computer literate. for someone of your calibre you, you'll manage just fine with Syncthing, no doubt about it.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!