Recommended Posts

I have a few tips, not sure what you pros would think though:

1. Always shoot in RAW.

2. Compose your shots before taking pictures, never point and shoot.

3. Never leave the camera in Auto mode set it to either Aperture or Shutter Priority depending on the type of shot you want.

and

4. Post processing is your friend.

Yes, though it won't be as effective.

To OP: If you don't want to spend too much on software right now you can use the software that came with your Canon camera, it'll allow you to do a plethora of adjustments and process the RAW files correctly.

Thanks, there is an open Beta of Lightroom 4 kicking about, its free until march too :)

Always take your photos with the intention of not having to use psot processing. Obviously your usaually going to need it but the less you have to do the better. You can end up loosing detail or worse if you over process them.

Take for example the before and after examples on the first page of this thread. Whilst the altered image looks more "professional" maybe to the average viewer, it looks fake and over done. Somewhere inbetween those two pictures would be much better.

And most importantly, shoot in raw, otherwise there's almost no point in even trying to do any prost processing.

Yes, but it's a bit of overkill, I'd stick with just WLPG.

while post processing is part of what makes that image what it is. the way it was taken is also improtant. No matter what Post he did, he wouldn't get that result with the camera set to automatic and just point and shooting it :)

lol okay I've been to that place and spot a dozen times and it never looks that good, a big tip of the hat to you for that shot. Its interesting seeing a shot of somewhere you've been like that, there really is some magic in post processing (not to take away from the work that went into taking that pic of course)

There is no post processing on this photo. That's how it came off the camera in M.

I haven't got the Exif here at work, but I was doing a lot of shooting at:

Aperture 10

ISO 100

30 Second exposure

Nikon D5100

All in manual.

One thing I'm noticing is a love for RAW. Don't get me wrong, I love RAW and shoot both RAW and JPEG Fine for all of my shots. I highly recommend this option, purely because for people new to photography, they want to show off what they've managed to do. If you have both a RAW and JPEG of that image, you can hook your camera up to any computer and pull the JPEG, where the RAW will need special software.

Just a thought for any newbies reading.

And to elaborate on a couple of the points other's have made, because I know I had no idea what things were.

ISO - Really play with this. The higher it is, the more boise you will get in the photo. I very rarely very away from 100 - 400.

Aperture - This is how much light the camera will allow into the sensor. The higher the number, the less light. So. Lower = Higher. Higher = Lower.

Shutter Speed - You will generally see numbers like 1/XXXX, 20" or Bulb. 1/XXXX = 1/1000th of a second. 20" = 20 Seconds. Bulb = Open until you tell it to close. The longer you have it open, the more heat the sensor produces, the more noise on the photo.

Post processing is the absolute last thing you should worry about when taking a picture. Good lighting, depth of field, exposure, composition. Get those down first, then worry about post processing, or whether you're shooting in JPEG or RAW, or what lens you're using.

Personally, if you want to achieve a sort of "lifestyle" look to your images, I'd avoid using flash and try to use natural light. As in, from a (ideally large) window. (unless you have access to a lot of studio lighting)

If you use an external flash, it's extremely useful indoors. I always use it, and when used correctly, it can work absolute wonders. For example, let me just show you some work I've done in the past in just pure product photography:

005eze.jpg

015lu.jpg

026hed.jpg

(More @ http://www.linkinbox.com/portfolio )

And I've used a flash for ALL these pictures.

Back at OP: I didn't read your post in your last reply, but yeah, I'm using L-series lens. Yes, I'm not using super expensive equipment -- my other lens besides the 24-105 f/4L is the 70-200 f/2.8L -- but they are definitely much more costly than what the average person has on here. (And no, the Rebel is not my main camera, I'd just like to make that clear :p )

Also +1 to all those people who says post-processing is the last thing. I always take my photos as if Photoshop doesn't exist. I only use it for slight optimizations, but other than that, they're usually good out of the box. As I've said in my last post, the only thing I've adjusted in the pic you've quoted is a very slight adjustment on the white reference.

It's okay if you suck. Just take random shots of nothing in particular and then add some effects like a vignette, turn some to b&w or sepia, make it look like it's an old poloroid and people will think you're amazing.

  • Like 3

It's okay if you suck. Just take random shots of nothing in particular and then add some effects like a vignette, turn some to b&w or sepia, make it look like it's an old poloroid and people will think you're amazing.

hahahahahaha, this is sadly true

Wow. I didn't expect such responses. Thanks a bunch. I've read lots of valuable thoughts on the matter and feel a lot more confident. I didn't even know about the rule of thirds really and didn't give much thought to composition. Honestly, and I'd hate to admit this, but I've been using my SLR mostly as a point and click. I purchased it to capture both video and photo of our daughter after she was born because a point and shoot wouldn't satisfy. I didn't think about all the knowledge and technical know how that can go into a good shot.

I definitely didn't take offense to anyone saying the issue was the way the shot was set up or anything at all. The basis of this thread was for me to gain valuable insight from you guys and it's allowing me to do just that :)..

I agree by the way regarding instagram and vignette effects. I set out to take great pictures without having to rely on editing. I thought I'd be able to catch vibrant colours and vivid detail and not rely on heavy editing and most people I've met at local shops tell me about how everything is edited now anyways so I shouldn't care. The way I see it, I want a picture as accurate to the reality of the event or occasion it's capturing as possible, not to be some manufactured image covering up my crap shooting lol.

Here's an outdoor shot I took of a friend of mine and her son:

IMG_2039.jpg

And one of my niece:

IMG_2010.jpg

What could I have done, without the use of post processing to really make the colours pop? Would a polarizing filter have made much of a difference in regards to that?

I'll be sure to read the links posted as well. Thanks for those! When I get some downtime on the holiday tomorrow I'll check them out!

Love the feedback and greatly appreciate it!

Hmm...Well thank you. And if you really think so, maybe it's just Picasa that's making everything look dull. I just see pictures like this one, and wonder what they did to make it look so good.

4468213356_07ffffd287_z.jpg

I guess the issue isn't so much what I'm doing with the camera, but rather what I'm not doing in post processing.

This picture shows the use of focus. I'm guessing it was taken with a glass lens. Many cheaper digital cameras don't have lens optics. The subject is in focus, everything else is out of focus. This emphasises the subject. It also gives the image a 3D effect.

A good resolution camera appears to have been used. This makes the whiskers nice and clear. Also light can be seen reflecting off the faucet and cat's eyes. Natural light is suggested by the range of colour. Also the image is brighter on the top. Perhaps near a kitchen window.

A medium speed shot is suggested by the clearly defined stream of water. But no water drops can be clearly seen at the bottom.

The clarity of the image suggests it hasn't been heavily compressed. jpg compression can badly reduce the clarity of the image. So I avoid using jpg.

Pet photos are always popular. Perhaps they didn't do any post processing, composition is the big thing here.

I also dislike HDR like that as they lose touch with reality for me.

As for the photos with the kids and the woman above, to make the colors pop more, try using a curves tool to pull up the highlights a bit, and perhaps even the midtones. Then increase saturation if necessary.

Edit: Something similar to this can also be done by tightening the histogram a bit in the levels tool, and then adjusting the saturation if necessary.

I've had my Canon 550D for a few months and I've just been messing about since I got it, I mainly sit at "CA" setting. While keeping the ISO at as low as possible usually between 100-400.

Canon has added their relatively new exposure mode called Creative Auto (or "CA"). The CA mode is a cross between the green zone and program mode. When set to CA mode, the EOS 550D allows the user to adjust picture style, motor drive, and exposure compensation, as well as to use the program shift function and select between RAW or JPEG file formats, but the rest of the more complex features remain under automatic control.

Here are a few shots.

6655075687_24f37cd7ab_z.jpg

6369189559_37c5f9383d_z.jpg

6178233793_f4a62e725e_z.jpg

6155185306_9ddbc8d9b6.jpg

Nother photographer chiming in. RAW, btw , is not really a "trick" It's a format that saves the "RAW" data off the sensor, instead of applying the cameras jpg processing to the image before it's recorded. What Owen did in his before/after shot was to just tweak the data that the camera saved by boosting the exposure, among other things. raw allows you to do this because it saves all the data that was seen. The downside to raw is that it takes up more space, but if you're ever going to get serious, thats the first thing you should be doing.

The downside to raw is that it takes up more space

And really slows your burst shooting down as the Camera has to write the much larger data as fast which depending on your MicroSD's class slows you down.

I use a class 10 card for faster speeds but still get "Busy" message now and again

IMG_2855.jpg

it's sharp (i guess you sharpened it?) but the composition and lighting is nothing special, I think you are trying to have too many things in the frame and these things dominate too much of the space in a non flattering way. Try choosing only 1 or 2 things to focus on.

IMG_2039.jpg

And one of my niece:

IMG_2010.jpg

The first one has some potential since you have unintentionally included some hair lighting due to overhead lighting (noon time?). The issue lies in the fact that you shot this in the shade while not properly exposed, therefore the face overall looks dark, you can either bump up the exposure or use fill flash or bounce a reflector. For the 2nd one it looks under exposed overall, try bumping up the exposure and you would see some more pop.

With regards to the cat picture on page 1, it clearly demonstrate what you lack, which is composition, lighting, selective focus and post processing. Selective focus is easiest to do if you just go and buy a 50 1.8 or 35 f2, cheap and practical. For lighting, try using window light to your advantage. For composition, start with rules of third and go from there with your own feel. Post processing is personal preference.

With regards to the cat picture on page 1, it clearly demonstrate what you lack, which is composition, lighting, selective focus and post processing. Selective focus is easiest to do if you just go and buy a 50 1.8 or 35 f2, cheap and practical. For lighting, try using window light to your advantage. For composition, start with rules of third and go from there with your own feel. Post processing is personal preference.

Yes, this. Get a 1.8, stick something by window light, or candle light, or any other nice soft light and start taking pictures. Don't even worry too much about getting the composition right off the bat, just work on depth of field and exposure. The nice thing about new digital cameras is that their sensors are so gigantic, you can crop away afterwards and still have a print-worthy resolution.

lol okay I've been to that place and spot a dozen times and it never looks that good, a big tip of the hat to you for that shot. Its interesting seeing a shot of somewhere you've been like that, there really is some magic in post processing (not to take away from the work that went into taking that pic of course)

This.

It's impressive.

It's all to do with the exposure yes?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!