LightSquared claims government testing 'rigged' by GPS industry ins


Recommended Posts

This is getting interesting. After the recent news that federal testing determined LightSquared's LTE network plans would never work without interfering with GPS (and a cease to any further testing) LightSquared has come back with guns blazing. In a statement, the company has accused the GPS industry of rigging the results by using antiquated equipment, shrouding the entire process in secrecy, and using unrealistic parameters for failure. Jeff Carlisle, LightSquared?s Executive Vice President of regulatory affairs and public policy, Geoff Stearn, LightSquared?s Vice President for spectrum development, and Edmond Thomas, former chief engineer at the FCC held a press conference and had the following to say:

Testing was shrouded in secrecy, no transparency. The GPS manufacturers cherry-picked the devices in secret without any independent oversight authority in place or input from LightSquared. The GPS manufacturers and the government end users put non-disclosure agreements in place for the PNT EXCOM?s tests, preventing any input by an independent authority or from LightSquared before the tests began. This secrecy made it impossible for independent experts to properly oversee or challenge the process and results, thereby leaving taxpayers who paid for the testing no option but to take the PNT EXCOM?s word for it.

The testing protocol deliberately focused on obsolete and niche market devices that were least able to withstand potential interference. When LightSquared finally obtained a list of the devices tested, after all testing in this first phase of tests had been completed, it was able to determine that the testing included many discontinued or niche market devices with poor filters or no filters. The units tested represent less than one percent of the contemporary universe of GPS devices. In fact, the only mass market device alleged to ?fail? during this round of testing performed flawlessly during the Technical Working Group testing, which used best practice protocols agreed to by all parties, thus raising doubts about the integrity of PNT EXCOM?s process.

The testing standard does not reflect reality. To guarantee favorable results, the PNT EXCOM selected an extremely conservative definition of failure ? one dB of interference. Independent experts agree that a one dB threshold can only be detected in laboratory settings and has no impact on GPS positional accuracy or user experience. In fact, GPS devices are designed with the ability to withstand eight dB or more of loss of sensitivity due to man-caused and natural interference. By setting the definition of interference at one dB, the testing was rigged to ensure that most receivers would fail. It should be noted that PNT EXCOM and others have justified the one dB threshold by citing an International Telecommunication Union (ITU) standard. However, that standard explicitly states that it does not apply to general purpose GPS receivers.

They go on to say other great quotables like asking reporters to enquire if it's "fair that taxpayers funded a testing regime they cannot review?" and speaking of violating "conflict of interest" laws. They are serious, and should be. Earlier this month, LightSquared was given just 30 days to get regulatory approval by Sprint, who is a heavy investor and has (had?) plans to use LightSquared's service for their nationwide LTE roll-out. Losing funding from Sprint would be a major financial blow to LightSquared. We're pretty certain Sprint will still be able to roll out their LTE network as planned, but they see an advantage in using LightSquared and would like to see everything resolved as well.

Were the testing procedures rigged? Will LightSquared get another shot with different testing procedures? Will Sprint continue to invest in the company? Join us next week for another episode of the Guiding LightSquared. See the press release after the break.

Former FCC Chief Engineer and LightSquared Question Validity of Test Results Rigged by GPS Industry Insiders

After learning that some devices tested have been out of production for over a decade, the parties call on NTIA to objectively audit testing and apply proposed mitigation standards

RESTON, Va., January 18, 2012 - LightSquared said today that the process used to test GPS devices by Air Force Space Command on behalf of the Space-Based Positioning, Navigation, and Timing Executive Committee (PNT EXCOM) was rigged by manufacturers of GPS receivers and government end users to produce bogus results, and revealed details of the testing to document its accusations.

PNT EXCOM advises and coordinates among U.S. government agencies on GPS matters and is comprised of representatives from those agencies with GPS expertise.

LightSquared has called on the National Telecommunications and Information Administration (NTIA) to objectively re-evaluate this initial round of testing and also to evaluate mitigation proposals the company has proposed.

Additionally, the company has called on the Federal Communications Commission (FCC) and the NTIA to conduct the second round of tests on high-precision devices at an independent laboratory to ensure objectivity and transparency.

In a call with reporters, Jeff Carlisle, LightSquared?s Executive Vice President, Regulatory Affairs and Public Policy; and Geoff Stearn, LightSquared?s Vice President for Spectrum Development; outlined how GPS industry insiders and government end users manipulated the latest round of tests to generate biased results. Also on the call was Edmond Thomas, former chief engineer at the FCC who explained how fair and accurate testing should be conducted.

  • Testing was shrouded in secrecy, no transparency. The GPS manufacturers cherry-picked the devices in secret without any independent oversight authority in place or input from LightSquared. The GPS manufacturers and the government end users put non-disclosure agreements in place for the PNT EXCOM?s tests, preventing any input by an independent authority or from LightSquared before the tests began. This secrecy made it impossible for independent experts to properly oversee or challenge the process and results, thereby leaving taxpayers who paid for the testing no option but to take the PNT EXCOM?s word for it.
  • The testing protocol deliberately focused on obsolete and niche market devices that were least able to withstand potential interference. When LightSquared finally obtained a list of the devices tested, after all testing in this first phase of tests had been completed, it was able to determine that the testing included many discontinued or niche market devices with poor filters or no filters. The units tested represent less than one percent of the contemporary universe of GPS devices. In fact, the only mass market device alleged to ?fail? during this round of testing performed flawlessly during the Technical Working Group testing, which used best practice protocols agreed to by all parties, thus raising doubts about the integrity of PNT EXCOM?s process.
  • The testing standard does not reflect reality. To guarantee favorable results, the PNT EXCOM selected an extremely conservative definition of failure ? one dB of interference. Independent experts agree that a one dB threshold can only be detected in laboratory settings and has no impact on GPS positional accuracy or user experience. In fact, GPS devices are designed with the ability to withstand eight dB or more of loss of sensitivity due to man-caused and natural interference. By setting the definition of interference at one dB, the testing was rigged to ensure that most receivers would fail. It should be noted that PNT EXCOM and others have justified the one dB threshold by citing an International Telecommunication Union (ITU) standard. However, that standard explicitly states that it does not apply to general purpose GPS receivers.

GPS and government end users should have opened the process for transparent review, chosen a representative sample of devices that reflect the scope of general purpose GPS receivers in the marketplace today, applied best practice standards to the testing protocol, and ? most importantly, the tests should have been conducted by an independent laboratory rather than by the GPS manufacturers themselves, since they had a large incentive to ensure that the tested receivers would not pass the testing.

LightSquared recommends that reporters consider asking PNT EXCOM the following questions to ensure accountability:

  • Why did the government choose to ignore LightSquared?s proposed power levels?
  • Why did the government choose a power level 32 times greater than the level at which LightSquared will operate?
  • Why did the test protocol select the 1dB degradation to noise as the interference standard, since it does not apply to general purpose GPS receivers and GPS units are typically designed with an 8dB level of tolerance?
  • Who determined what acceptable interference is for the current round of testing? What is that standard?
  • Why was the testing conducted using outdated/discontinued devices rather than a representative sample of what is currently in the market?
  • Isn?t it a violation of conflict of interest laws for representatives of GPS manufacturers to sit on the PNT advisory board and play a central role in its consideration of LightSquared when those companies are actively lobbying on the same issue?
  • Is it fair that taxpayers funded a testing regime they cannot review?

LightSquared has agreed to meet every technical guideline requested by the Federal Aviation Administration (FAA), FCC and NTIA and will continue to work in collaboration with the federal government to resolve the GPS interference issues. The secretive behavior of the PNT EXCOM indicates a co-opted process. The inappropriate influence of the private sector on their decision-making has been brought to the attention of NASA?s Inspector General in a separate conflict of interest complaint filed by LightSquared.

LightSquared is asking for fair and transparent oversight of the testing process by the FCC and NTIA, much like the agencies provided in the first round of testing that was openly agreed to by all parties. Transparency is the only way taxpayers can be assured that the testing process is not manipulated to benefit one particular set of self interests. LightSquared is confident that a fair process will allow the company to move forward with its plan to deliver wireless broadband to hundreds of millions of consumers.

LightSquared?s mission is to revolutionize the U.S. wireless industry. With the creation of the first-ever, wholesale-only nationwide 4G-LTE network integrated with satellite coverage, LightSquared offers people the speed, value and reliability of universal connectivity, wherever they are in the United States. As a wholesale-only operator, LightSquared will deploy an open 4G wireless broadband network to be used by existing and new service providers to sell their own devices, applications and services ? at a competitive cost and without retail competition from LightSquared. The deployment and operation of LightSquared?s network represent more than $14 billion of private investment over the next eight years.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ummmm that is what is it supposed to do. Just turn if off in settings if you do not want it analyzing your open tabs. Chrome does the same thing with Gemini. Sarfari will do the samething after Apple's AI and even more so with the release of their 27 versions that is now powered by Googles LLM/ML models. Understanding why it is doing it and how it can help you vs jumping to some conspiracy theroy is a much better approach. As long as it can be turned off, all is good. Yes the default should be off but the a lot of people would never discover these features.
    • Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      94
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!