Galaxy S II horrible battery life


Recommended Posts

I just got my first smartphone today, the Galaxy S II. I actually work at AT&T and am still waiting on my employee line to activate, but I took the phone home early. So there's no service at the moment, but I've been using it on wifi. I already rooted it and installed UnNamed v2.2.1, which removes the junk AT&T bloatware and supposedly increases battery life. (Not worried about voiding warranty since 1. I didn't trip the flash counter and 2., I work there and can exchange it myself.)

1hr and 5 mins on battery caused it to go from 100% to 87%. Screen brightness is all the way down, bluetooth and GPS are off, and I don't even have any apps installed yet besides the ones that come with UnNamed, none of which are running.

Is it draining fast simply because I don't have service yet, and perhaps it's just trying to connect or something? I still have my old flip phone as an alarmclock with an old sim and it lasts about a week without service...so I'm not really sure what's going on.

The only thing I've done so far is wifi + browse phone / appstore. Within a couple of minutes, I saw it drop 1%. This can't be right. I wonder how long it would last playing a video or a game. Sheesh.

So yeah. Is this because the phone is not currently receiving service, or is it perhaps another thing entirely?

Link to comment
https://www.neowin.net/forum/topic/1055926-galaxy-s-ii-horrible-battery-life/
Share on other sites

So you've been playing with the phone with screen on for 1h and it dropped 13%? Sounds about normal then. LOL Welcome to Smartphones and huge 4.3" Super AMOLED LCDs!

You can't really tell battery life also after the first few hours of owning a phone because you usage is not "normal" compared to your old beater.

Put the device in Airplane mode also - and yes you can turn on wifi in Airplane mode - that'll save the device from scanning and trying to connect to AT&T all the time.

Your battery will drain much faster when it is searching for service. Try puting it in airplane mode and then manually switching on the wifi (this disables the phone radios)

Okay, got it. It just dropped to 86% by scrolling through my contacts for about 2 minutes. lol. Let's see what this airplane mode does.

Edit: @SHoTTa25, no, no, haha. It's only been on for a little over an hour. I've hardly used it. It's been in standby most of the time.

sounds like a bad flash or a wake lock trouble imho

airplane mode shuts the phone down !

no text no email no nothing lol

He doesn't have service yet so he's no doing no text or emailing anyways. But as already pointed out, you can still use wifi while on Airplane mode. That just turns off the 3G radio but you can still connect via wifi to get email if you haad that already all setup.

according to that so 5 minutes to loose 1% with the wifi/screen on. Dunno what you complaining about there :D Later in the week when you start using the phone like normal then you'll see how a normal day goes.

according to that so 5 minutes to loose 1% with the wifi/screen on. Dunno what you complaining about there :D Later in the week when you start using the phone like normal then you'll see how a normal day goes.

So this is normal? Wow. I can't imagine how awful it's gonna be when I actually have apps and service. Looks like I might have to buy that bigger official samsung battery, if they have it for the US version. Yikes.

Its the problem with unnamed rom. here are some who have this issue

http://forum.xda-dev...d.php?t=1335376

try cyanogenmod.

I was wanting to try cyanogenmod anyway. So how do I go about installing another OS rom/kernel? Just boot into CWM, wipe device, and the install the new one?

edit: Nevermind, I think I figured it out.

Please note from site - NOTE: This guide is only applicable for the international variants (GT-I9100, GT-I9100M, GT-I9100T) and not the regional variants.

http://wiki.cyanogen...ll_Update_Guide

Galaxy S II AT&T version guide

http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II_(AT%26T):_Full_Update_Guide

Please note from site - NOTE: This guide is only applicable for the international variants (GT-I9100, GT-I9100M, GT-I9100T) and not the regional variants.

http://wiki.cyanogen...ll_Update_Guide

Galaxy S II AT&T version guide

http://wiki.cyanogen...ll_Update_Guide

Yep, I found the guide a couple of minutes ago. I'll report back once I brick it. lol. Thanks.

I was wanting to try cyanogenmod anyway. So how do I go about installing another OS rom/kernel? Just boot into CWM, wipe device, and the install the new one?

edit: Nevermind, I think I figured it out.

here is the rom just in case u were looking. http://download.cyanogenmod.com/?type=stable&device=galaxys2

i hope u figured it but if u have issues let us know.

here is the rom just in case u were looking. http://download.cyan...device=galaxys2

i hope u figured it but if u have issues let us know.

K-K-K-Kombo breaker!!!

http://download.cyanogenmod.com/?device=galaxys2att

That's the one for the AT&T version. :p

Sorry, but the usage is normal, generally depending on how you use your phone, you can expect to charge your phone every 1-2 days. Remember, the biggest drain on a battery is either when it's searching for a service, the wireless being on or when the screen is on. This is completely normal for someone who has just got their first smartphone, they always say "Why is the battery life so bad?", this isn't a dumb phone, the screens are bigger, they have WiFi, email, internet etc

If it's one for 5 minutes and it goes down 1% doesn't mean it'll do that in standby unless there is something that is keeping it awake.

Several factors here that you need to consider before complaining about battery life:

1. Usage/Screen Brightness: You just got the phone. In all likelyhood, you are going to play around with it almost every chance you get to change the settings and try new apps, which will drain the battery. Give it a week or two before you get used to the phone and the novelty wears off a bit before you finally get back to normal usage. Oh, and really consider using minimal screen brightness rather than auto brightness whenever you can. Just leaving the screen on in idle will drain your battery pretty quickly if brightness is set too high.

2. Rom: Not all roms are created equal and it is very easy to for a single bug to suck the life out the phone. Best to keep track of the xda thread for common issues as you are not likely to be the only one experiencing the same issue.

3. Kernel: Rom is only half the package. Flashing the right kernel, especially one that is coded properly and fine-tuned to balance performance and battery life will drastically improve the experience. Different roms usually are compatible with different kernals, so do some research on the best one.

4. Haptic feedback/animations: I would suggest turning down the haptic feedback to about 25% as it usually is all that that you need for regular use. Also, turn off screen animations, like for opening the app drawer, will also improve battery life as well.

5. Apps: Keep well in mind that when installing apps, manually go the settings and disable auto-syncing as it is unnecessary for most apps.

I have the international SGS2 and I can make it last 2 days on about 5 hours of screen time and moderate data usage. Then again, I don't make a lot of calls, most texting, emails, music, etc.

It's still dying just as fast even with wifi off and airplane mode on, so I'm just going to assume it's normal and switch back to unnamed. The organization of CM7 is horrible in comparison.

You can't really just hold it in your hand and tell whether it's draining faster or slower. The best way to check battery life is to max it out and then leave it alone for a few hours. The % loss per hour will be a concrete measure. Just be sure to you use the same method (wifi on, flight mode on, etc) for a consistent comparison. But again, don't expect to find the best one in a single day. It takes time. For now, just aim to get a rom that suites your personal ui preferences and themeing, and go from there.

Mine goes at about 1% per 60 minutes with data, wifi, and voice signal on. In full flight mode, it might last twice that.

That doesn't sound right. I have a Droid Incredible sitting here (also rooted, and loaded with CM7). With airplane mode on, and WiFi on, it will go for a few days easily (with email sync set to manual). Also, the Incredible is 3.7" and I have a 1750 mAH battery, but nonetheless, you definitely have something wrong with that phone. I had a Galaxy Fascinate (also rooted/rom'ed), and didn't experience that. Have you checked the battery stats (check in settings) to see what is eating up the battery?

That doesn't sound right. I have a Droid Incredible sitting here (also rooted, and loaded with CM7). With airplane mode on, and WiFi on, it will go for a few days easily (with email sync set to manual). Also, the Incredible is 3.7" and I have a 1750 mAH battery, but nonetheless, you definitely have something wrong with that phone. I had a Galaxy Fascinate (also rooted/rom'ed), and didn't experience that. Have you checked the battery stats (check in settings) to see what is eating up the battery?

You can't really just hold it in your hand and tell whether it's draining faster or slower. The best way to check battery life is to max it out and then leave it alone for a few hours. The % loss per hour will be a concrete measure. Just be sure to you use the same method (wifi on, flight mode on, etc). But again, don't expect to find the best one in a single day. It takes time. For now, just aim to get a rom that suites your personal ui preferences and themeing, and go from there.

Mine goes at about 1% per 80 minutes.

Alright. Well I went back to UnNamed for now. I really like the UI and extra options. I'll keep monitoring the idle hourly usage.

That doesn't sound right. I have a Droid Incredible sitting here (also rooted, and loaded with CM7). With airplane mode on, and WiFi on, it will go for a few days easily (with email sync set to manual). Also, the Incredible is 3.7" and I have a 1750 mAH battery, but nonetheless, you definitely have something wrong with that phone. I had a Galaxy Fascinate (also rooted/rom'ed), and didn't experience that. Have you checked the battery stats (check in settings) to see what is eating up the battery?

Display is 58% and Android system is 21%. Battery life is at 70% now, vs 87% when the thread started. I guess that's sort of normal for how long I've been messing with it. I'll see how it holds up for the next couple of days.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      478
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!