USA People - What Are Your ATM Habits?

By Sir Topham Hatt
in General Discussion

 Share

Recommended Posts

Grand Master

Sir Topham Hatt

Posted
Posted

We were talking at work about how much cash is in an ATM and figured some must have well over ?20,000. However in researching I found this:

Who withdrawls only 40 bucks? I get $400 from the ATM every time I go, otherwise I'd be going to the ATM every two-three days instead of every two weeks.

This makes me think people hardly use ATMs in the USA?

In the UK I would say it seems silly to spend less than ?10 on a debit/credit card. But I don't walk around with ?400 in my pocket either. I personally don't have more than ?20 around the home in cash. However I would say many people DO visit cash machines every few days to take money out.

What say you Americans?

Link to comment
https://www.neowin.net/forum/topic/1057252-usa-people-what-are-your-atm-habits/
Share on other sites
Veteran

metal_dragen Veteran

Posted
  • Veteran
Posted

I typically visit the ATM about once every 2 weeks and draw out $60. I take my lunch to work every day and that $60 is enough throughout 2 weeks for incidentals like sodas, snacks and the occasional dining out.

I don't know why anyone would draw out their maximum every time they visit an ATM. Debit/check cards are accepted at 99% of stores and are often faster to use than cash.

  • Southern Patriot
  • Like 1
Grand Master

xendrome

Posted
Posted

In the UK I would say it seems silly to spend less than ?10 on a debit/credit card. But I don't walk around with ?400 in my pocket either. I personally don't have more than ?20 around the home in cash. However I would say many people DO visit cash machines every few days to take money out.

Why would it be silly, do they charge you a fee for usage of your debit/credit card for stuff under 10?

Grand Master

Nick H. Supervisor

Posted
  • Supervisor
Posted

Why would it be silly, do they charge you a fee for usage of your debit/credit card for stuff under 10?

No, but I agree with him. Using a card for anything under ?10 seems silly to me.

I know you weren't asking about Europe, but I'll throw my opinion in. I take out 50 francs every couple of days, but at the same time I buy my breakfast and lunch on the way to work. In the UK I took out ?20 regularly, sometimes multiple times a day depending on what was going on.

Grand Master

jerzdawg

Posted
Posted

I rarely go, only if I need a large amount of cash. Just about every store I visit offers a cash back option, so if I need $20-$40 I just do that. I will never use a ATM machine that does not belong to my bank because I refuse to pay fees for taking out my money.

Grand Master

threetonesun

Posted
Posted

Why would it be silly, do they charge you a fee for usage of your debit/credit card for stuff under 10?

No, but the credit card companies do charge the shop a fee. If it's local place, and it's something cheap, I try to pay in cash. If I spending $5 at Wallmart or something, then sure, charge it.

Grand Master

Southern Patriot

Posted
Posted

I don't know why anyone would draw out their maximum every time they visit an ATM. Debit/check cards are accepted at 99% of stores and are often faster to use than cash.

This exactly. The only time I go to an ATM is if I know I'm going somewhere that only takes cash, or if I need to get a money order.

Grand Master

jakem1

Posted
Posted

No, but I agree with him. Using a card for anything under ?10 seems silly to me.

Actually many places will charge you a fee if you spend less than ?10. For instance, most/all off licenses charge up to 50p for purchases less than ?10.

To me it seems silly to use cash at all and I look forward to the day when you can use a card anywhere for any amount without having to worry about vendor charges.

Proficient

Dead_Monkey

Posted
Posted

Actually many places will charge you a fee if you spend less than ?10. For instance, most/all off licenses charge up to 50p for purchases less than ?10.

To me it seems silly to use cash at all and I look forward to the day when you can use a card anywhere for any amount without having to worry about vendor charges.

in the US, the "exchange fee" for debit transactions is significantly lower than for credit card transactions (with Amex charging the highest credit card fees). Most businesses that give discounts for paying in cash will give the same discount if you use a debit card instead of a credit card.

Also, I don't use an ATM unless I'm in a bind because the fee is extremely high to withdraw cash (from 3 to 6 or more dollars depending on the arrangement, usually you get a fee from the bank that owns the ATM and another one from your own bank). Many people withdraw cash when they are doing a debit transaction somewhere else (grocery store, Target, barbershops will often give you cash even on a credit card transaction) so they don't have to pay a fee. You can usually take out cash from an ATM owned by your bank or sometimes from a network without a fee, but finding one can be a pain in the ass.

Grand Master

Chasethebase Veteran

Posted
  • Veteran
Posted

Surprising how different it is over there, I'll regularly use the "hole in the wall" to pull out tenners or twenties when I'd like a bit of cash on me. Usually to avoid the "?5 minimum spend" that a lot of retailers put on card payments.

Grand Master

spacer

Posted
Posted

Before moving in with my girlfriend, I would go to the ATM about once every few months. I have direct-deposit for my paychecks, and I always pay for everything with a credit card when possible. (I pay it off every month, and I get points for every dollar I spend; so it's basically free money) Very rarely would I ever go to the ATM. This set up was nice, since I get charged $3 just for taking money out, no matter where I go; which is complete BS.

Now that I live with my girlfriend and we split bills and groceries, she just gives me cash for her part and I never go to the ATM. I honestly think I haven't used an ATM since last May (when we moved in). In fact, my new debit/ATM card that I got in the mail from the bank has yet to be used. It still has the "call this number if you have problems" sticker on it.

Proficient

ybrett23

Posted
Posted

i never really carry cash at all, unless im off out to the pub, i pay for everything on debit card, wether its a loaf of bread at 90p or milk at ?1.20

i find that if i have any cash on me i waste it on things i dont need. even going to the shop i pick up stuff i dont need because i have the money on me :/

so whenever ive been out and had cash as soon as i get home i put all the change in a jar, i regulary bank ?200 from "change" ive saved.

Grand Master

Jason S. Global Moderator

Posted
  • Global Moderator
Posted

i visit the ATM every 2-3 weeks and take out $100-160. I use cash on small food purchases and liquor. a lot of liquor stores will wont let you pay for it w/ a CC. They'll let you buy beer and wine with a CC, but not liquor. i just use cash when it's a smaller amount, that's all. i have many friends who never carry cash. it's pretty annoying. they think they can pay for everything w/ a CC, but when the time comes, they dont have even $2 to throw my way.

i never really carry cash at all, unless im off out to the pub, i pay for everything on debit card, wether its a loaf of bread at 90p or milk at ?1.20

i find that if i have any cash on me i waste it on things i dont need. even going to the shop i pick up stuff i dont need because i have the money on me :/

so whenever ive been out and had cash as soon as i get home i put all the change in a jar, i regulary bank ?200 from "change" ive saved.

this is what my friends do and it's freaking annoying. as soon as youre together and need a couple bucks to cover something - "oh, sorry man, i dont have any cash" AT LEAST carry some ones or a ten spot.

Proficient

ybrett23

Posted
Posted

i visit the ATM every 2-3 weeks and take out $100-160. I use cash on small food purchases and liquor. a lot of liquor stores will wont let you pay for it w/ a CC. They'll let you buy beer and wine with a CC, but not liquor. i just use cash when it's a smaller amount, that's all. i have many friends who never carry cash. it's pretty annoying. they think they can pay for everything w/ a CC, but when the time comes, they dont have even $2 to throw my way.

this is what my friends do and it's freaking annoying. as soon as youre together and need a couple bucks to cover something - "oh, sorry man, i dont have any cash" AT LEAST carry some ones or a ten spot.

annoying? why because i dont have cash on me to lend other people? how is that annoying?

Grand Master

Sir Topham Hatt

Posted
  • Author
Posted

Why would it be silly, do they charge you a fee for usage of your debit/credit card for stuff under 10?

Some places charge for using credit cards, but do you have chip and pin in the US?

Cash is usually faster but I guess spending less than a few pounds on a card just seems silly.

I just find it really interesting how different it is.

Proficient

Hendrick

Posted
Posted

I almost never use cash. Everything goes on my debit card. The only time I stop is if I know I need cash (borrowed from a friend, going to a place I know only accepts cash, ect.) Usually then I'll only take out what I need, and if it's only $10, then that's all I'll get. (I know one ATM around here you can withdraw only a dollar if you wish).

Experienced

Squirrelington

Posted
Posted

I used my ATM Debit Card to make most of my purchases at the point-of-sale so I rarely visit an actual atm for anything other than a balance inquiry if I think my balance spreadsheet is out of alignment for some reason. If I do withdraw, it is usually only $20-40 and maybe once a month.

Enthusiast

apple jacks48

Posted
Posted

I take out about $50 every two weeks, mostly used for settling a bill with a group of people when we don't want to split the bill up 5+ ways. I use a credit card for everything to get cash back - Chase pays me around $400-$500 a year just for using their card. Not sure why anyone would ever use a debit card (unless credit is not accepted of course)...

Grand Master

Charisma Veteran

Posted
  • Veteran
Posted

i never really carry cash at all, unless im off out to the pub, i pay for everything on debit card, wether its a loaf of bread at 90p or milk at ?1.20

i find that if i have any cash on me i waste it on things i dont need. even going to the shop i pick up stuff i dont need because i have the money on me :/

so whenever ive been out and had cash as soon as i get home i put all the change in a jar, i regulary bank ?200 from "change" ive saved.

This (Y) Cash just seems so much easier to spend. I think it's because I look at my bank statements frequently and know how much I have in the bank, and cash seems like 'extra' that doesn't count in that number. I always think about it when I pull out the debit/credit card (I use credit in some situations, it's better protected than the debit card if the number were to get swiped somehow, but I always pay off the balance at the end of the month so it's coming from the same place essentially).

That being said, I do usually try to keep a few dollars around in case someone needs to borrow, or in case I randomly decide to stop at Starbucks or something--but that's very infrequent, I make coffee at home or we have a nice Keurig maker at work so I rarely have to buy it.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • WhatsApp is getting usernames, and you can reserve your preferred one now

      By Fiza Ali · Posted

      WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
    • How do you future-proof a home or small office network?

      By sphbecker · Posted

      When I think about a network, there are really two aspects, the hardware and the wiring. So here is what I would do for both. Wiring: Use Cat6A for the patch panel, outlets, and all structured cables (cables installed in walls). Run plenty of Wireless Access Point (WAP) cables, as a general rule, assume a signal can only pass through 2-3 walls and can't pass through a floor (that is conservative, but trust me on this if you want strong WiFi)  Cat6 patch cables are fine for now if you don't plan to run 10gig, those are easy to replace later if needed. Run OS2 single-mode fiber to anywhere you think you may have a server or sub-switch. (yes, single-mode for everything on a small network, don't mess with multimode unless you have entire racks of servers and that minor module cost and power savings will matter). If you really want to future proof, also run fiber to any high density WAP locations, it is likely that WiFi 8 WAPs will push the limits of 10g. Run 6-12 pairs of single-mode fiber between your MDF and the building's MDF, even if you only need 1 or 2 pairs now, those extra pairs will pay off down the road. Hardware: (its easy to say "get all the features incase you need them", so instead of futureproofing, I am going to take approach of suggesting areas worth investing in, and areas you can save money). Don't overspend thinking you need every feature on every port. You don't need 10g on every port, you don't need PoE on every port. Don't overspend on redundancy either, unless you are ready to buy two of everything, don't waste money buying two of some things and not others. Dual power supplies are worthwhile, but probably not HA or multi-path redundancy.  Get 1 "distribution layer" switch that your router/firewall will connect to as well as all your access layer switches below. This should be a 10g switch with a combination of copper and SPF ports and should be a fully managed switch. Given that you said it is a small network, I suggest also using that distribution layer switch for servers and WAPs, meaning it will need PoE. Speaking of wireless, get good professional tri-band WAPs, and either turn on the band stirring options, or limit 2.4 to an IoT only SSID. This will provide a solid WiFi capable nearly everything but the highest of bandwidth clients...you could even consider skipping wiring workstations depending on usage. Access layer switch for workstations and printers can be cheaper switches, 2.5g is a good sweet spot between price and future proofing, but even 1g is fine for most individual clients (the kind that could probably be fine on WiFi). You can consider saving a little on access layer switches by only getting 1 PoE switch for whatever needs it (remember your WAPs are connecting to the distribution switch, not here), and non-PoE for your workstations, because desk phones are falling out of favor. You can also save money here by not buying managed switches if you don't need them--but really do some soul searching there, if you go this route, then anything that isn't on your workstation VLAN would either need to be connected to the distribution switch, or its own switch. Also, don't feel like you need a fancy fabric stacking switches for your access layer, that is the point of the higher-end distribution layer, to remove the need for things like that at this level. Home Hardware: I'm realizing the above assumed an office setting, if this if for your house and home lab then the above still applies, but you'll probably want everything managed and PoE, just because, but you probably also don't need multiple access layer switches. if your total port count is below 24, just skip separating distribution layer and access layer and just get one nice switch with the features you want. For home use, don't worry about home running every device to the main switch, there is nothing wrong with running sub-switches for your media areas and office, those essentially become your access layer, just look for sub-switches with a 10g uplink so sharing bandwidth isn't an issue.
    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers

      By Karthik Mudaliar · Posted

      Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16

      By Copernic · Posted

      GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview

      By David Uzondu · Posted

      Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.

  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      533
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!