I'd sell the damned house


Recommended Posts

CBS Boston....

Car Crashes Through Haverhill Home For The Fifth Time

HAVERHILL (CBS) ? If lightning doesn?t strike twice, Haverhill homeowner Jim Curtis has a hard time believing it. He was sitting at the computer in his Amesbury Street home when an SUV plowed through the front wall landing in the living room.

?When I heard the squealing tires, I got up and the car came through right in front of me,? said Curtis.

But since his family first owned the house in 1954, it?s happened at least five times. Another car came through the same wall fifteen years ago, and nearly every side of the house has been hit. In this case, police say a teenage driver was making a left turn at a busy intersection in front of jthe house when he lost control.

?He wanted to make sure I was OK and then said he never wanted to drive again,? says Curtis. The living room is now strewn with debris from couch to chair to splintered wood, and a television that was in front of the wall likely damaged. Fortunately the main beams on the antique home were not hit.

Curtis says the house sits at an intersection where cars accelerate and round the corner too fast, often squealing as they go. ?They just push the gas all the way down and take off,? he said.

While he acknowledges his unlucky location he has a solution and would like to petition the state to put a guardrail in front of his home. ?I?m feeling a little nervous standing right here,? he said.

Police say the driver has been cited for the accident, and while Curtis is frustrated, he?s more inconvenienced with the repairs that will have to be made.

Link to comment
https://www.neowin.net/forum/topic/1057462-id-sell-the-damned-house/
Share on other sites

I see homes like this all the time in the outside edge of sharp curves, and when I do see one I'm always wondering how many people have plowed into the house, or why somebody would put their house in a place like that.

Bad planning on the home-owners' part.

There was a house like this where I grew up. The owner stuck boulders along the the bend where the yard met the road. Never had a car come plowing through the house again. Unfortunately, those boulders are pretty scratched up. :laugh:

I see homes like this all the time in the outside edge of sharp curves, and when I do see one I'm always wondering how many people have plowed into the house, or why somebody would put their house in a place like that.

Bad planning on the home-owners' part.

You realise the roads might not have always been there right?

There is a house that's practically right on the road not far from where I live here. It pre-dates the invention of cars.

  • Like 1

Bad planning on the home-owners' part.

Really? You're blaming the home owner for the fact that drivers are taking corners too quickly? If anything it sounds like some sort of barrier should have been erected a long time ago. Failing that/additionally, traffic calming measures should be implemented. I fail to see how a house that's been there since at least 1954 can be blamed.

I love the video in the article. "[it's happened] so often the home owner has nearly lost count", said Beth Germano. Five times and he's nearly lost count? She then goes on, "Practically every wall in this home has been hit..." Really? That seems geometrically impossible. Hyperbole FTW.

There was a house like this where I grew up. The owner stuck boulders along the the bend where the yard met the road. Never had a car come plowing through the house again. Unfortunately, those boulders are pretty scratched up. :laugh:

rather the boulders then teh house LOL. Good idea!

In the city were I live there used to be this house at the end of a steep hill which had been hit about 9 times since I can remember, mostly by trucks that lost their brakes going down hill. Every time the owner did the repairs to the house only to see it hit again. He asked our city's public works to put a guard rail in front of the house to protect his family and property from further damage, but they denied his petition on the basis that it was not their fault that the accidents happened in the first place. He had to dish out almost $3000.00 to have a guard rail professionally installed. Everything went OK until about two years ago when a loaded concrete mixer came charging down hill hitting the guard rail and ripping it from it's place and then hitting the house almost destroying it completely, killing both the driver of the truck and one person inside the house. Sure enough they vacated the remains never to come back. What remained of the house was declared a public nuisance and was demolished in November.

Every person that hit my house, would be taken to court to pay for the repairs!

No insurance no pay out unless you clain against your own.......

Boulders are good as are those interlocking type that are use as sea defenses [ topped off with spikes just to make sure :rolleyes: ]

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!