Lumia 800 bricking

By KomaWei
in Windows Phone/Mobile

 Share

Recommended Posts

Community Regular

KomaWei

Posted
Posted

I recently been having problems with my lovely Lumia 800. One day it just died and wouldn't turn on for anything. I've googled for help and many many people have been experiencing problems with it. It wouldn't turn on, nor would it charge. But, today, it vibrated any time I plugged in the usb, and would just vibrating every couple of minutes. I hit the different buttons to reset it, turn it on, etc. Then I just plugged it into the computer with Zune open and it was asking me to restore my phone. So now I'm restoring it, even if I have lost everything. Hopefully, it will work again.

Anyone ever experienced this issue?

Edit: It failed at 58% and now won't do anything.

Link to comment
https://www.neowin.net/forum/topic/1059240-lumia-800-bricking/
Share on other sites
Neowinian

Sudakoma

Posted
Posted

I had the same problem with my partners Lumia 800 the other day after the battery was left to go totally flat. Normally when this happens, plugging it into the charger will bring it back to life but this time it was stuck at the black and white battery icon showing a tiny bit of red charge. After scouring the following thread over at Nokia support I finally managed to get it going but not without losing all photos and half the text messages on the phone. (Luckily all her photos are stored on Skydrive)

http://discussions.europe.nokia.com/t5/Nokia-with-Windows-Phone/Lumia-800-wont-power-on-or-charge/td-p/1225979

At first nothing seemed to work, tried all combinations of pressing buttons etc and after getting the vibrations a few times, it went back to just showing the battery icon. The thing that seemed to work was warming the handset up and pressing and holding the camera button. This eventually brought up the 'connect to PC' icon, which i did, which prompted Zune to open and restore the handset. The restore failed at 99% and it went back to the battery icon again. On the third attempt the restore succeeded and the handset came back to life but had lost a lot of info.

It seems to be a common problem caused by the battery totally draining and not even having enough power to reboot itself. Hopefully Nokia will be looking into this problem and it can be fixed with a future update. Good luck and let us know if you manage to get your working!

Grand Master

alexalex

Posted
Posted

I had the same problem with my partners Lumia 800 the other day after the battery was left to go totally flat. Normally when this happens, plugging it into the charger will bring it back to life but this time it was stuck at the black and white battery icon showing a tiny bit of red charge. After scouring the following thread over at Nokia support I finally managed to get it going but not without losing all photos and half the text messages on the phone. (Luckily all her photos are stored on Skydrive)

http://discussions.e...ge/td-p/1225979

At first nothing seemed to work, tried all combinations of pressing buttons etc and after getting the vibrations a few times, it went back to just showing the battery icon. The thing that seemed to work was warming the handset up and pressing and holding the camera button. This eventually brought up the 'connect to PC' icon, which i did, which prompted Zune to open and restore the handset. The restore failed at 99% and it went back to the battery icon again. On the third attempt the restore succeeded and the handset came back to life but had lost a lot of info.

It seems to be a common problem caused by the battery totally draining and not even having enough power to reboot itself. Hopefully Nokia will be looking into this problem and it can be fixed with a future update. Good luck and let us know if you manage to get your working!

It is a hardware problem not a software that can be fixed by a software update.

Grand Master

The Teej

Posted
Posted

This happened to me once. It kind of just started working again. I recommend plugging in via the mains, USB via PC doesn't seem to play as nicely I've noticed (for charging, anyway).

All I can say is, when leaving it on mains charge, see if you can turn it on and keep doing that. If it keeps turning on and off just let it do its thing, that's what I do.

Community Regular

KomaWei

Posted
  • Author
Posted

Well, it does vibrate when I plug it up to a charge (pc and wall). Just doesn't do anything more than that. When I plug it into the computer. It says something like Nokia DLoad. I get a bunch of yellow triangles. If I asked for update driver. Says it cannot find drivers. I contacted Nokia. They want my IMEI, but I lost the box part that has it, and since my phone isn't working. I cannot get the IMEI from that. I wish there was some other way.

Collaborator

Coolicer

Posted
Posted

Well they won't let me until I get the IMEI. US doesn't have the 800 yet, so I'm screwed.

As far as I know, the IMEI number must also be printen on the box of the phone. If you still have the box, there should be a white sticker with the barcode and lots of other numbers on it.

Grand Master

Zain Adeel

Posted
Posted

opss...

why dont u try jailbreaking it somehow?

Get it to run.

Oh no custom ROMs for the Lumia :(

guess ull have to talk to them on the forum

Ask the Nokia forums guys to send u some software.

They have special softwares that they install and connect the phone to it to get info like IMEI and other stuff.

Grand Master

Mr. Gibs

Posted
Posted
Affected Products or Services

RM-801, Lumia 800

Introduction

PR1.1 has been available for end users to update via Zune since mid January.

We have discovered that after the Zune update to PR1.1 (software version 1600.2483.8106.11500, see SR2546 for more info) when the battery is drained there is a possibility that a device can?t turn on even though it has been charged. This bulletin provides potential solutions to address this.

Bulletin Content

Devices potentially affected: All units updated via Zune to PR1.1 (see SR2546 for more details). PR1.1 factory units are not known at this time to be affected.

Scope of Issue: After the PR1.1 Zune update when the battery is emptied and the device shuts off, even after a prolonged period of charging with a compatible charger (eg. AC-16, AC-10) the device will remain off and the end user is unable to turn on their device.

Please try the following methods to Turn On the device (note these are all potential solutions):

1) Connect/Disconnect the device to the charger a few times

2) Do a Reset (press and hold the power button for ~10 seconds)

3) Plug the device to a PC using a USB cable and keep it there for 20 minutes

1. Get the following software: http://www.symbian-t...m/navifirm.aspx and http://www.seidea.co...011-51-2-63048/

2. Install them, and just in case go to: C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers and install the WinUSB Drivers and Fuse Drivers

3. Run Navifirm.

4. Select Nokia 800 (rm-801) from the left side.

5. Select release 1600.2483.8107.11501

6. Find the variant that matches your color / country (Doesn't matter which one tbh, the only difference is the apps and start screen logo otherwise they're identical)

7. Download it.

8. Follow this guide: http://forum.xda-dev...d.php?t=1457341

Alternatively, since it seems this is a problem with devices that have been upgraded to FW 11500, you might want to download the older .11451 firmware (point 5 in my checklist above). You'll lose some battery life but at least it won't brick.

Veteran

neo158

Posted
Posted

It is a hardware problem not a software that can be fixed by a software update.

Really, I suppose you have a source for that and not just trolling like usual?

Veteran

~Johnny

Posted
Posted

Really, I suppose you have a source for that and not just trolling like usual?

He can't answer right now, his profile says he's banned...

It does seem however in most cases to be software problem (bad firmware) that causes it to be unable to turn on, though of course there'll always be a few dud units out there.

Grand Master

Noveed

Posted
Posted

Happened to me a few times Battery indicator with a small red charge ...

I leave it plugged into USB for about 5-10 minutes. Then unplug, Hold Power. It turns on then once its on the home screen I plug USB back in then charge to full.

Already using the latest update ... kinda not happy with nokia about this.

Grand Master

Mr. Gibs

Posted
Posted

Happened to me a few times Battery indicator with a small red charge ...

I leave it plugged into USB for about 5-10 minutes. Then unplug, Hold Power. It turns on then once its on the home screen I plug USB back in then charge to full.

Already using the latest update ... kinda not happy with nokia about this.

If you can stand to have a bit less battery life, flash a 11451 firmware. Follow the guide I posted on the previous page though instead of point 8 do the following (and of course instead of 11501 get 11451):

1. Once you got all the files downloaded from Navifirm, go to the download folder and copy the files you downloaded into a folder called rm-801 which is in a folder called Products:

So if you downloaded the firmware to the default location of navifirm, your folder structure should look like this:

C:\NaviFirm+ 1.7\Fw\059J3G0\Products\rm-801\*Files you downloaded go here*

2. Run Nokia product support tool ( C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0 ).

3. Go to file -> settings and change the package download path to "C:\NaviFirm+ 1.7\Fw\059J3G0\Products" (or wherever you saved those files)

4. Go to file -> open product and select rm-801 from the list

5. Plug your phone in and it should be detected

6. Check the bottom right corner of the product support tool, the cube should be green. If it isn't click on it and click rescan. If it still doesn't turn green then either your folder structure is wrong or check the next bit of this terribadly written guide.

7. Go to programming -> refurbish and then click start. Let it run (will take about 10 mins)

8. Voila your phone is now flashed with the previous firmware.

---

Ok if the cube doesn't turn green and the folder structure is correct you've downloaded the firmware for a different product code. Not a big deal since technically the firmwares are all exactly the same, the difference is just the apps and carrier stuff that comes pre-installed with it. Now you can either go and download the correct firmware or just rename the files you downloaded:

1. To find out your lumia 800 product code, plug your phone in with the support tool open. Now on the right side of the program there should be a section called Phone Information. Your product code will be listed below it.

2. Now if you want to redownload, go back to navifirm and find the firmware variant that matches your product code. If you want to rename, open the folder with the files you downloaded and rename the bold parts of the following files with your nokia's product code (the one you found out in step 1)

RM801_059J3G0_1600.2479.7740.11451_004_signature.bin

RM801_11w45_1_059J3G0_label.xml

RM801_059J3G0_1600.2479.7740.11451_004.dcp

RM801_059J3G0_1600.2479.7740.11451_004.vpl

RM801_11w45_1_059J3G0_label.pcx

3. Go back to step 6 of the previous terribadly written guide.

---

You can also use the same method to flash newly released firmwares if you can't be bothered to wait for the update to pop up on Zune.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • The Light of Life? We actually do glow till our Death, study finds

      By hellowalkman · Posted

      The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • The official Funny Pictures thread

      By +Edouard · Posted

      Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2

      By Copernic · Posted

      Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43

      By Copernic · Posted

      Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1

      By Copernic · Posted

      Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      81
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!