Windows 8/8.1 tips and tricks - post them here

Recommended Posts

  • 1 year later...
1 hour ago, bigbloke said:

Dead Kink

Probably, it's from 5 years ago. :/ The whole thread is old.

  • Like 1
Link to post
Share on other sites
Barney T.

^ Thread Closed

Link to post
Share on other sites
  • Barney T. locked and unpinned this topic
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By indospot
      Patch Tuesday: Here's what's new for Windows 8.1 and 7 this month
      by João Carrasqueira

      We're 13 days into October, but it's not truly a new month until Microsoft releases its Patch Tuesday updates for Windows, and as we're on the second Tuesday of the month, that happens today. Along with all supported versions of Windows 10, there are also new cumulative updates rolling out to Windows 8.1 and some Windows 7 users.

      There are two kinds of updates for each operating system - the monthly rollup update and the security-only update. For Windows 8.1, the monthly rollup update is KB4580347 and you can download it manually here. It includes the following changes:

      It also has a couple of known issues:

      Symptom Workaround Certain operations, such as rename, that you perform on files or folders that are on a Cluster Shared Volume (CSV) may fail with the error, “STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)”. This occurs when you perform the operation on a CSV owner node from a process that doesn’t have administrator privilege. Do one of the following:

      Perform the operation from a process that has administrator privilege. Perform the operation from a node that doesn’t have CSV ownership. Microsoft is working on a resolution and will provide an update in an upcoming release.

      When installing a third-party driver, you might receive the error, “Windows can’t verify the publisher of this driver software”. You may also see the error “No signature was present in the subject” when attempting to view the signature properties using Windows Explorer. This issue occurs when an improperly formatted catalog file is identified during validation by Windows. Starting with this release, Windows will require the validity of DER encoded PKCS#7 content in catalog files. Catalogs files must be signed per section 11.6 of describing DER-encoding for SET OF members in X.690.

      If this happens, you should contact the driver vendor or device manufacturer (OEM) and ask them for an updated driver to correct the issue.

      As for the security-only update, it's KB4580358 and you can download it manually here. It only includes the first and last of the bullet points from the monthly rollup. It also has the same known issues as the monthly rollup.

      Of course, for Windows 7, only certain businesses can legitimately obtain the updates, since you need to be paying for extended security updates (ESU) after Microsoft dropped extended support for the operating system at the start of the year. The monthly rollup here is KB4580345, and you can download it manually here. It includes the following changes:

      The update has one known issue:

      Symptom Workaround Certain operations, such as rename, that you perform on files or folders that are on a Cluster Shared Volume (CSV) may fail with the error, “STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)”. This occurs when you perform the operation on a CSV owner node from a process that doesn’t have administrator privilege. Do one of the following:

      Perform the operation from a process that has administrator privilege. Perform the operation from a node that doesn’t have CSV ownership. Microsoft is working on a resolution and will provide an update in an upcoming release.

      The security-only update here is KB4580387 and you can get it manually here. It includes the same changes as the monthly rollup, except the third and fourth bullet points. It also has the same known issue.

      As usual, the monthly rollup updates should install automatically sooner or later, but if you want the security-only updates, you'll need to install them manually from the links above.

    • By eRajesh
      The best hidden Gboard features that you must know about
      by Rajesh Pandey

      Gboard is one of the most popular keyboards for Android devices right there and rightfully so because of the sheer number of innovative features it packs. The keyboard is also a perfect example of how virtual keyboards for today's smartphones are more than just a keyboard with the amount of functionality they pack.

      If you have been using Gboard only for typing out messages and emails so far, you have been using it wrong then. You can use the keyboard for quick Google search, translations, adding GIFs, and do so much more. Below is a look at some useful Gboard features that you might not know about and which will help improve your overall typing experience.

      If you use SwiftKey, you can read about some of its hidden features here.

      Custom mini stickers

      Forget emoji and GIFs. You can create custom "minis" stickers based on you in Gboard as well. Simply tap the sticker button in Gboard's toolbar, scroll to the right in the toolbar and tap on the cog (Settings) button. Then go to the Browse tab and select the option to create your custom "minis" in the banner at the top. You will then have to click a selfie and then wait for a few seconds for Gboard to create the custom mini stickers.

      Quickly add punctuations

      You can quickly add punctuations other than a comma or full stop by simply long pressing on the full stop button. A list of the most common punctuations will then pop up and you can slide your finger to select the one you want to use.

      Switch to one-handed layout

      The displays on Android smartphones are getting taller and wider which makes one-handed typing on them a frustrating experience. Gboard does come with a one-handed layout that you can use in such situations though. You can easily activate one-handed mode in Gboard by long-pressing the "," button and then dragging your finger to the second icon you see. Once activated, you have the option of moving the keyboard to the left or right edge of the display as per your requirement.

      Delete words using a gesture

      Want to quickly delete a word or a sentence that you just typed? No need to repeatedly press the backspace button. Instead, you can just swipe to the left from the backspace button to select the text you want to delete. The longer you swipe, the more words will get selected and they will be automatically deleted once you lift your finger from the display.

      In case you change your mind and want to keep the sentence or word you just deleted, Gboard will automatically show you the deleted word or sentence as a suggestion.

      Translate text easily

      With Google Translate integration in Gboard, you can easily translate text on the fly without having to leave the current chat window or text compose window. Simply tap the Google Translate icon in the Gboard toolbar and proceed to enter the word or sentence that you want to convert. Gboard can automatically detect the language that you are entering and convert it into a language you want, though you can select the input language manually as well.

      Use the keyboard as a trackpad

      You can use Gboard as a trackpad as well to quickly move the cursor where you want while formatting or editing text. On iPhone, you need to long-press on the spacebar and then drag your finger around to move the cursor. Gboard has a similar implementation as well. Simply long-press on the spacebar and then drag your finger around to turn the keyboard into a virtual trackpad and move the cursor around easily.

      Add fractions easily

      Want to quickly add a fraction? Simply long-press on the number and Gboard will show a list of common fractions that you can add easily.

      What are some of your favorite Gboard tips and tricks? Drop a comment and let us know!

    • By eRajesh
      The best SwiftKey for Android features you must know about
      by Rajesh Pandey

      The keyboard that you use for typing on your smartphone is no longer just a keyboard. As smartphones have gotten smarter, so have the keyboards that we use on them. Microsoft's SwiftKey is one of the most popular third-party keyboards for both Android and iOS devices and over the years, it has turned from a simple keyboard into a mini-app of its own that can do so much more.

      Do you know that you can use SwiftKey to quickly check your calendar appointments? Or translate text directly while in a chat window? There's a lot more that SwiftKey can do and you will be surprised by its feature-set. Read below to find out some useful SwiftKey features, tips, and tricks you might not be aware of.

      Do note that some of the features mentioned below are exclusive to SwiftKey for Android and not available on the iOS version.

      Easily move the cursor around

      Formatting text on Android can be a bit of a pain, especially when you need to move the cursor to a specific location as our fat fingers mean the accuracy is not going to be good. Taking a cue from iPhone, Microsoft has recently added a gesture in SwiftKey for Android that allows one to use the spacebar for quickly moving the cursor around.

      In a text compose window, simply long-press on the spacebar and then slide your finger on it to move the cursor around. This makes the entire process of formatting and editing long emails and documents significantly easier.

      Use the clipboard

      If you frequently edit documents and write emails on the go, you will find the clipboard feature in SwiftKey extremely useful. Any text or media file that you copy will automatically be stored in SwiftKey's clipboard and you can access it later on. This is useful if you are frequently copy-pasting a lot of content throughout the day as you won't always have to go back to the source content for copying again. You can also pin content to the clipboard if you frequently paste something.

      To access the clipboard in SwiftKey, tap the double-arrow icon and then tap the clipboard icon from the toolbar. All your recent and saved clips will be shown here. In case you are not comfortable with the clipboard feature of SwiftKey from a privacy viewpoint, jump into SwiftKey settings -> Rich input -> Clipboard and disable the 'Remember copied items' option.

      Translate text directly

      If you ever need to translate text, there's no need to open your favorite translator app. Instead, you can directly translate text using SwiftKey which is powered by Microsoft Translator. Bring up the toolbar by tapping the double-arrow icon on the left corner of SwiftKey and then tap the translate button (fifth icon) and start typing the text you want to translate. The translated text will be automatically entered into the text compose window. You can change the input as well as the final output language as per your liking.

      Undock the keyboard

      It is not necessary that SwiftKey shows up at the bottom part of your phone's display. You can undock the keyboard and move it around anywhere on the display as per your liking as well. Simply bring up the toolbar in SwiftKey and then tap the three-dot overflow menu button on the left corner. From there, go to Modes and select Float.

      Your SwiftKey keyboard will now be undocked and you can move it around on your phone's screen wherever you want by using the drag handle at the bottom. To dock the keyboard back into position, simply drag it to the bottom of the screen and hold for a second.

      Check calendar availability

      Need to check if you are available on a particular day for a meeting or just want to see if you will have enough time in hand on a day to attend another meeting? You don't need to open the calendar app on your phone for this as you can check your calendar appointments directly from within SwiftKey.

      Bring up the toolbar in SwiftKey, tap the three-dot overflow menu button, and then select Calendar. If you are using this feature for the first time, you will have to grant it access to your calendar. After that, you will be able to see all your upcoming calendar appointments right from within SwiftKey irrespective of the app you are using.

      Text expander

      SwiftKey comes with a built-in text expander functionality which you can use to automatically save text snippets that you frequently use and assign them to a keyword. You enter that keyword and it automatically expands to the text snippet. For example, you have an "addr" shortcut for automatically inserting your entire home/office address.

      To use the text expander feature in SwiftKey, go to the Clipboard from the toolbar and then select the "Add a new clip" option. Proceed to add the "clip content" followed by the shortcut. The latter is optional since any clip you add will also be available on the clipboard for quick insertion purposes.

      Do a web search

      Ok, this is a simple one but many people still seem to be not aware of its existence. You can do a Google (or Bing) web search right from within SwiftKey without having to leave the chat window or mail that you are composing.

      Bring up the SwiftKey tool and then tap the search icon on the left corner. You can then quickly do a web search and the search results will open in a mini browser window. The browser window will have two handy options of taking a screenshot or sending the search result link as a message.

      What are some of your favorite SwiftKey features that you rely on heavily? Share them with us in the comments below!

    • By Usama Jawad96
      Microsoft apparently just fixed a Windows security flaw first reported to it in 2018
      by Usama Jawad

      Microsoft fixed quite a number of bugs in this month's Patch Tuesday update, which came out last week. While it packed numerous fixes for various versions of Windows, it did draw some criticism for the handling of a security vulnerability that was reported to it by Google.

      However, it appears that the Redmond giant's security woes are not yet over as a new report claims that the firm just fixed a Windows zero-day exploit that was reported to it back in 2018.

      Last week, Microsoft fixed a security hole in various versions of Windows that mainly deals with the operating system's incorrect handling of file signatures. In CVE-2020-1464, the company noted that:

      In a blog post on Medium, security researcher Tal Be'ery has explained that Bernardo Quintero, a manager at VirusTotal - a service owned by Google - first discovered the vulnerability being exploited back in August 2018. This exploit, internally called "GlueBall", was immediately reported to Microsoft and the findings were published in January 2019 by Quintero. Microsoft acknowledged the issue and added mitigation actions in supporting tools, but stated that it would not fix the issue in the operating system itself. The reasoning behind this decision is not public.

      After this, several blog posts were published by other people, explaining how to use GlueBall to exploit Windows. Then in June 2020, GlueBall was once again highlighted by prominent social media accounts.

      It would seem that roughly around this time, Microsoft began to take this issue seriously and a proper fix to the gaping security hole was finally released in this month's Patch Tuesday. According to Microsoft's security advisory, this flaw was present in Windows 7, 8, 8.1, RT 8.1, Server 2008, 2012, 2016, 2019, and Windows 10, going all the way up to version 2004, and that it was exploited across numerous versions of the operating system.

      In a vague statement to KrebsonSecurity, Microsoft stated that:

      The handling of this incident from Microsoft's end is extremely strange, to say the least. One has to wonder why Microsoft delayed fixing a Windows security flaw for nearly two years, especially when it was present in virtually all major versions of the operating system.

      Source: Tal Be'ery (Medium) via KrebsonSecurity

    • By Rich Woods
      Microsoft announces Edge is rolling out in the next few weeks, and a bunch of new features
      by Rich Woods

      Microsoft's Build 2020 developer conference starts today, and as always, there's a bunch of news around its brand-new Chromium-based Edge browser. There are a bunch of new features on the way, but perhaps more significant is that the company finally confirmed that it's going to begin rolling out Edge within the next few weeks.

      You might recall that the team actually announced general availability back in January, promising a slow rollout. Slow isn't actually the right word though, because it never actually rolled out. Users have had the opportunity to download a stable version of the browser, and then in February, it started rolling out to beta testers on the Windows Insider Program's Release Preview ring. In other words, other than beta testers, exactly zero people have received this as an update.

      While the blog post doesn't explicitly say this, it seems likely that it's going to arrive as part of the Windows 10 May 2020 Update, which is already available for developers and coming later this month. While the browser is going to be pushed to your machine via Windows Update, updates to the browser will not.

      As mentioned, there are a bunch of new features as well. Collections is getting Pinterest integration, as Microsoft has partnered up with the company. If you're unfamiliar with Collections, it allows you to take images, texts, and links from around the web and store them in groups. Now, you'll see recommendations from Pinterest at the bottom of a Collection. You can also export a Collection to Pinterest. This feature is coming to Edge Insiders within the next month.

      There's also a new sidebar search option coming, so you'll no longer have to open a new tab and lose your focus to search for something on the web. The search results will appear in the sidebar as well. This feature is arriving for Edge Insiders in the coming weeks.

      Edge improvements naturally go hand in hand with Bing improvements. There's a new Work page that's included in Bing search results. It's just another tab along with images, shopping, news, and so on, and it will appear if you're signed in with a work account. The idea is to give Microsoft Search's capabilities to look within your organization its own area, so it will include files, people, internal sites, and so on. Power BI integration is coming by the end of June.

      Finally, Microsoft is releasing a preview of WebView2, which is part of its Project Reunion efforts to unify Win32 and UWP. WebView2 is based on Chromium, so developers can include that in their apps instead of the original EdgeHTML WebView.