Recommended Posts

Define "cheapo."

Cheapo in the sarcastic sense haha. all in all, the tripod ballhead and L plate set me back $1400.

A lot of money but worth every penny!

This tripod has some improvements over its predecessors, the base plate has a system in place that won't allow it to drop out any more. The legs are sturdier and have better protection against the elements.

The feet won't fall off anymore, it has build in spikes and it also comes with snow shoes.

I have had no other tripods, I like to spend my money on the right stuff right away. Lots of people cheap out on their tripods at first and end up buying several tripods in the end spending more then i did.

Also most people forget with a 5D MkII and a proper lens you have 3.5 grand sitting on top of it, you do not want it to fall to its death!!!!

This tripod can officially support a weight of 25Kg, well I weigh about 71Kg and can lean on it with my full weight and it doesn't even flinch! This thing is as solid as a rock! Tried a few tripods at the store and none of them come even close to the build quality of this, the only brand that has a similar build quality is Really Right Stuff, and those tripods cost even more.

Took me three months to decide which one to buy.

I have had no other tripods, I like to spend my money on the right stuff right away. Lots of people cheap out on their tripods at first and end up buying several tripods in the end spending more then i did.

If you've had no other tripod how do you know it's even the "right stuff"? because of the price? More power to you but seems a little over the top unless you're a professional photographer.

If you've had no other tripod how do you know it's even the "right stuff"? because of the price? More power to you but seems a little over the top unless you're a professional photographer.

No because unlike some people who have money to burn, I actually work hard for my money and do a fair amount of research before I buy something. I've spend three months reading reviews online, asking questions, and testing tripods at my local store before deciding this is the right one for my current and future needs. Price doesn't say ****, My 400 dollar Samyang 35mm f/1.4 blows the 1300 dollar Canon 35mm f/1.4 out of the water at almost any level image quality wise. I do not buy things because of their price tag, but for its quality and i never buy something on a whim. High quality tripods have a average life span of 20 years and up if you take good care of them thats only 70 dollars a year. I know plenty of people who still use their 30 year old Gitzo's on a daily basis.

wow..

i just dont know what to say :o

please take care of the tripod!

and congrats on the buy..

my tripod cost me $15

What are some features of this Tripod? I mean.. why is it so expensive? is it just the good built quality or some high tech features? Like auto balance or something? :p

wow..

i just dont know what to say :o

please take care of the tripod!

and congrats on the buy..

my tripod cost me $15

What are some features of this Tripod? I mean.. why is it so expensive? is it just the good built quality or some high tech features? Like auto balance or something? :p

Ok the Ballhead is an "Arca-Swiss" which is the company that actually set the standard for all ballheads that we know today, the ballhead has a double pan feature basically only the camera needs to be level to take panoramas the Legs can be totally crooked it won't matter. The Ballhead supports a load up to 60kg. It has a Lever action quick release clamp that's adjustable to any size plate which makes it compatible with any brand, as far as i know no other company has this.

The Gitzo is a systematic that means you can customize it for example you can add a center column, a leveling base, a video base. It comes with build in spike feet and snowshoes, it has special protection against sea water, mud, dust and sand. Its carbon fiber and it supports up to 25kg. other then that it all comes to sturdiness and build quality. It only weighs 1.96kg. If you want a cheap tripod that will be just as strong you end up with a 6kg aluminum tripod. try hauling that + all you other gear with you all day when hiking!

The Really Right Stuff L plate fits my camera's body perfectly and allows me to switch from landscape to Portrait mode with out decentralizing the weight balance. (It won't hang next to your tripod)

Just release the clamp flip your camera on its side and tighten.

You pay for the names of course but those names also guarantee quality products.

I also completely agree that its a lot of money but in my opinion worth every penny!

avatar3.jpgTook me three months to decide which one to buy.

Yeah so? There are a lot of options out there.

You have to take into account how much it needs to support, how long it is both folded and fully extended and how much weight you want to carry around all day.

Then you have the option of aluminum, wood, basalt, magnesium and Carbon. Carbon being the lightest and most expensive. There are also lot of different models and brands out there.

Also one of the bigger factors besides how much it will supports is vibration dissipation, which it really import with a combination of +30sec exposures and wind and waves bashing into it.

my tripod cost me $15

Not that everybody needs a $1400 tripod, but there's a HUGE difference just between a $15 tripod and a $50 tripod and a $150 tripod. A HUGE difference. HUGE HUGE HUGE. I can't emphasize it enough.

My current tripod was about $150, and I went through 3 cheaper ones before I finally got what I currently have (it's made by SILK). I had the previous ones for about 6 months each before they broke. I've had this one for about 3-4 years.

DJD could easily have his tripod for 30 years.

I spent about $300 all together for my tripod legs and head.

I wanted to spend more and get a really nice carbon fibre one, student budget though.

You got yourself a beautiful tripod. 1.96kg is nothing. Well worth the money, my uncle has a 20 year old tripod (not sure if its gitzo or manfrotto). It's better than mine lol

I spent about $300 all together for my tripod legs and head. (I think)

I wanted to spend more and get a carbon fibre one, student budget though.

You got yourself a beautiful tripod. 1.96kg is nothing. Well worth the money, my uncle has a 20 year old tripod (not sure if its gitzo or manfrotto). It's better than mine lol

Definitely planning on keeping it for +20 years, if it breaks before that I'll blow up the Gitzo factory hahaha

Ok the Ballhead is an "Arca-Swiss" which is the company that actually set the standard for all ballheads that we know today, the ballhead has a double pan feature basically only the camera needs to be level to take panoramas the Legs can be totally crooked it won't matter. The Ballhead supports a load up to 60kg. It has a Lever action quick release clamp that's adjustable to any size plate which makes it compatible with any brand, as far as i know no other company has this.

The Gitzo is a systematic that means you can customize it for example you can add a center column, a leveling base, a video base. It comes with build in spike feet and snowshoes, it has special protection against sea water, mud, dust and sand. Its carbon fiber and it supports up to 25kg. other then that it all comes to sturdiness and build quality. It only weighs 1.96kg. If you want a cheap tripod that will be just as strong you end up with a 6kg aluminum tripod. try hauling that + all you other gear with you all day when hiking!

The Really Right Stuff L plate fits my camera's body perfectly and allows me to switch from landscape to Portrait mode with out decentralizing the weight balance. (It won't hang next to your tripod)

Just release the clamp flip your camera on its side and tighten.

You pay for the names of course but those names also guarantee quality products.

I also completely agree that its a lot of money but in my opinion worth every penny!

Definitely planning on keeping it for +20 years, if it breaks before that I'll blow up the Gitzo factory hahaha

those are some great features.. ..

I dont know much about Tripods. So thats why i asked. :p

And well u BETTER!!! this thing should last a lifetime!

  • 1 month later...

Cheapo in the sarcastic sense haha. all in all, the tripod ballhead and L plate set me back $1400.

A lot of money but worth every penny!

This tripod has some improvements over its predecessors, the base plate has a system in place that won't allow it to drop out any more. The legs are sturdier and have better protection against the elements.

The feet won't fall off anymore, it has build in spikes and it also comes with snow shoes.

Very nice but!

The price of the old version I'd have demanded to know why those "improvements" were not in the old version!! I imagine they purposefully leave these things out so that they have a "next" version otherwise they won't be able to release anything new with improvements and charge the earth for it :p

I have had Velbon and Slikk tripods in the past but currently have the Red Snapper alloy series with ball head and it's a good piece of kit and contains all of the above features yet also comes with a heavy duty padded carrying case as well as shortened centre column and brackets!

Cost ?150 with the ball head too!

redsnapper_tripod_splits.jpg

That absolutely does not budge when locked in place and the ball head feels as rigid as a tank!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Umm, read my answer again! If you have something to add or contribute, feel free. Otherwise my point was that you apparently dont want faster updates... so you want slower updates by process of elimination. If you have something to contribute, meaningful answers are better.
    • These features described above are good, but far from what developers will like the most. The main feature that developers will care and love the most it's called "Bring Your Own Models". It gives us the ability to connect to LOCAL AI models running on Ollama. The feature it's located on GitHub Copilot tab -> On the model picker where you can select "manage models" instead of paid models and then it will show you the "Bring your own models" window where you can now select Ollama and the endpoint of your local server. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!