Recommended Posts

We are still going.. it still looks ok for now,,,,. I am still broken and being jerked with so much about this thing... this time of year is always wonky with me though... something allways happens :-(

and my area is very depressing tons of bad stuff is going on here that's scaring me a bit.... some of it happened close to my house...

Thank you so much neoadorable... Much appreciated.

i hope you and your family find peace. if the area is not pleasant, please move! we all had these experiences, whether it's crime or people you don't like, or whatever...it sounds like you're going through quite a lot right now, so if you can, start spending some time and energy on looking for a new place to live. after all, a domicile is one of the most basic needs, so it's not like it's wasted time and energy! you deserve to be happy where you live, it's the law in most jurisdictions around the world!

Grasshopper is now a "Mega-Thrust" rocket, and that's just the landing gear?!? WTF? New engine to go mega-fhrust?

@Elon Musk ? @elonmusk

Landing gear of the mega thrust propulsive landing rocket done (next gen Falcon). First hops soon

>

Making large scale rocket propulsion landing work well is a critical step towards a fully reusable Mars transport system...?

>

...which is the critical breakthrough needed for life to become multiplanetary.

large.jpg

Brownsville, Texas spaceport news -

http://www.brownsvilleherald.com/articles/brownsville-140215-spacex-cameron.html

>

The Federal Aviation Administration will hold a scope meeting on SpaceX from 5 to 8 p.m. Tuesday at the International Technology, Education and Commerce Campus, or ITECC, on Mexico Boulevard. The meeting will take place in the ITECC center court and is open to the public.

A poster presentation is scheduled from 5 to 6 p.m., with the FAA making a presentation from 6 to 6:15 p.m. Public statements will be taken after that time, with each statement allotted three minutes.

>

Salinas said Perry?s office is the one that connected SpaceX with Brownsville officials.

"The lead came from the governor?s office and there is no doubt in my mind that there is going to be support across the board for this project, including the governor?s office, which has bent backwards" for this project, Salinas said.

http://www.spacenews.com/launch/120409-details-spacex-texas-site.html

I'm back with startling news....

Might not be able to make it down to florida for the launch... mom's work won't let her have time off now.... I hope it gets delayed again.... sister is still sicky....

very broken about it... it is a once in a lifetime event and it would have been nice to meet the launch team that set this up and socialize with everyone... and watch my dad's dream come true... I'm sure it allready has and he is an awesome higher energy being that can create a universe of his very own....

I realize to me, that's more important and even more awesome then seeing some ashes being launched in a rocket.... that's even more deep and even more real to me...

I'm sure he would never ever fault me for not going....

however if we still get a chance then he would be proud of me either way....

his journey isn't over and niether is any of ours....

*doesn't fight the tears this time*

A delay at this time is unlikely; their software issues have been resolved and the Dragon is fueled and ready to go. There was a possibility yesterday when a redundant GPS device on the ISS failed, but they spend 5 hours replacing it with a backup unit. The only other issue was the pending launch of a Soyuz with 2 Russians and an American on board tonight, and it went just fine and they're on their way to the ISS. Looking like a go for the 19th at this point.

By the way - the webcast is going to include questions to SpaceX asked by some of us space geeks.

One expected to come up is the "Falcon 9 v1.1", which may or may not be a new term for the Falcon 9 Block 2 - a larger and even more powerful Falcon 9 that is expected to grow from the current 178 feet to 229 feet tall.

Falcon 9 v1.1 appeared yesterday in a NASA document approving it for mission launches, and the space sites have been abuzz ever since.

Up is a GO :)

On Tuesday NASA's space station management team approved SpaceX's first commercial flight to the ISS on Saturday May 19, signing off software updates to the Dragon spacecrafts flight computer. Launch from SpaceX"'s Launch Complex 40 at Cape Canaveral is set for 4:55 AM EDT (0855 GMT).

The launch will be broadcast on NASA TV and streamed on both NASA and SpaceX's websites.

http://www.nasa.gov/multimedia/nasatv/index.html

http://www.spacex.com

The FAA held a meeting yesterday in Brownsville, Texas, to discuss the proposed SpaceX Falcon 9, Falcon Heavy and Falcon xR (reusable) spaceport with the community. There were several huge rendered images showing what the the facility will look like. Here they are, though shrunken considerably and a couple cropped to show vehicle & pad details.

Not fancy, but they follow the Russian minimalist appNroach and integrate their vehicles horizontally, so no huge buildings or pad structures are required - just a hangar.

Full document and image PDF's on this FAA page....

post-347280-0-04240100-1337164947_thumb.

post-347280-0-81167800-1337164956_thumb.

post-347280-0-20497900-1337164964_thumb.

post-347280-0-67267300-1337164973_thumb.

post-347280-0-83446900-1337165095_thumb.

http://portsmouth-nh...eave-portsmouth

NASA Ships Leave Portsmouth

Liberty Star and Freedom Star are preparing for Saturday's SpaceX launch.

The two NASA ships that have been docked at the New Hampshire State Pier left port this morning, heading to their mission support locations for Saturday's scheduled SpaceX launch.

NASA spokeswoman Katherine Barnstorff said the "Liberty Star" and "Freedom Star" left port around 8 a.m. The two ships had been docked in Portsmouth since last month in preparation for their mission involving the SpaceX launch. The launch was originally scheduled to take place on April 30, but got delayed due to weather.

According to NASA's website, this mission is "a demonstration flight by Space Exploration Technologies, or SpaceX, as part of its contract with NASA to have private companies launch cargo safely to the International Space Station."

Saturday's SpaceX launch is scheduled for 4:55 a.m. The launch of the Falcon 9 rocket carrying a Dragon capsule will occur from Cape Canaveral Air Force Station in Florida.

During the flight, SpaceX's Dragon capsule will conduct a series of check-out procedures to test and prove its systems, including the capability to rendezvous and berth with the International Space Station, according to a NASA press release.

The primary objectives of the flight include a fly-by of the space station at a distance of 1.5 miles to validate the operation of sensors and flight systems necessary for a safe rendezvous and approach. The spacecraft also will demonstrate the ability to abort the rendezvous. Once these capabilities are successfully proven, the Dragon will be cleared to berth with the space station.

thanks for the updates Doc, so it was slightly delayed again? i will try to watch it live on NASA TV, but may not be home in time :| hopefully will make it, if not then the replays. i really wish the best for the launch and all involved! this is our future we are talking about here!

The Falcon 9 v1.1 sounds cool...229 feet is a pretty tall rocket!

remixed, please keep us posted too and i still hope you can make it?

I sadly can't make it if it's not delayed again at the last minute... I am very dissapointed and I'm crushed...

My stupid work.... grrrr.... how they can my sister's illness took this away from me....

all I've been getting is dissapointment and bad stuff happening to me this month.... can't wait for it to be over.

My mom doesn't even wanna watch it online cuz she's too broken about this... :-(

spring sucks...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Although AI is great and has it's use cases they likely have massively overhyped it and it has not delivered as per their expectations. I fully expect them to start saying the same things again when it does get to a certain level of intelligence!
    • Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.
    • Hey what's about the proton vpn firefox extension ? It's not working today
    • On what though? Not Ray Tracing.
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      137
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!