Help - Hard Drive Randomly Clicking and Disappearing from Windows Explorer


Recommended Posts

Hi all,

I'm experiencing a strange issue with my PC where one of my 1TB Hard Drives randomly clicks and disappears from Windows Explorer. I can read and write data to it without issues until it disappears from Explorer and the only way to get the Hard Drive to reappear it to reboot the computer.

I am at a loss as to what is causing the issue, but i don't think the hard drive is about to fail as i dont get any issues within Windows when acessing my data. I have used SeaTools to scan the drive for issues and it seems fine.

Could it be a faulty SATA or Power Cable that is casuing the issue?

Well, I can say from experience that if you hear clicking from your hard drive, it's probably on the verge of mechanical failure. As soon as you get access to it, move your files off of it onto another drive. My 2 TB did something similar and at first I could read and write, but after a few weeks, I started having errors on it and the clicking got more frequent. Your best bet is move stuff off of it and then test your theories with different cables and connections on your motherboard. Best bet is to use the same cable on that drive on other drives and the same port on your board to see if that is the problem. But almost always if you hear a drive clicking, it's on the verge of death.

The clicking started a few days ago but it's not constant, it could happen one minute and stop the next, from late last night until the early hours i was streaming movies from it to another computer to watch and it was fine, as i have said its random.

What i have done at the moment is swap the SATA cable with the one from my BluRay Drive and removed a fan molex connecter that i had placed between the PSU and the HDD and all seems fine just now, i will monitor the situation for a few hours to see if this helps.

What everyone else said.

Clicking is the devil's play thing >.>

EDIT::

It's unlikely that the cable is the issue. The most likely outcome if that were the case is the drive just disappears from explorer and gets parked by the drive firmware.

There should be no clicking in this scenario. Clicking = mechanical fault as a rule of thumb.

Nope. Not the SATA Cable. Two thing could happen: the hard drive will die, or you can re-partition it and maybe it will work nicely. I have an old harddrive that clicked and dissapeared many times, I bought a new one then re-partitioned the old harddrive, and the old one works even now. I'm using osx on that old harddrive and it works perfectly, no clicking, not any problems at all.

So try to re-partition it.

Nope. Not the SATA Cable. Two thing could happen: the hard drive will die, or you can re-partition it and maybe it will work nicely. I have an old harddrive that clicked and dissapeared many times, I bought a new one then re-partitioned the old harddrive, and the old one works even now. I'm using osx on that old harddrive and it works perfectly, no clicking, not any problems at all.

So try to re-partition it.

My objection to this is you have no idea which outcome will be the answer.

I take a very black and white approach to this. Once a drive starts clicking, it's out.

You were running a fan off a SATA power cable?

WUT!?

it was set up like this

PSU 4-Pin Molex (female) > Fan 4-Pin Twin Molex (male and female) > Sata 4-Pin Molex (male)

Oh.. Well in that case it's possible there was a power supply issue.

When you say SATA cable, people are always going to think of the data cable.

The clicking could be caused by insufficient voltage reaching components.

Oh.. Well in that case it's possible there was a power supply issue.

When you say SATA cable, people are always going to think of the data cable.

The clicking could be caused by insufficient voltage reaching components.

Yeah thats what i was thinking i removed the fan from between the PSU and HDD and changed the Sata (data) cable.

My objection to this is you have no idea which outcome will be the answer.

I take a very black and white approach to this. Once a drive starts clicking, it's out.

It started to clicking for me... It clicked everyday, the whole pc hanged, I needed to reset, turn off etc... And when I re-partitioned it, it became perfect, and not a single clicking happened from that. This happened 2 years ago, and the hd works perfectly everyday from then. I'm using it right now too. So no, it's not out. Atleast for me.

Baha.. I like that people are all still saying the same thing :p

Clicking = Death. First rule of harddrives :p I'd be backing that drive up regularly I think >.>

let me clarify something the clicking is NOT constant but random and usually stops even if data is being read or written to it. Let me also say that the last time i hear it click was on Monday and it started again about an hour ago.

If it were about to fail the clicking would be constant, i would also experience system freezing, data erros and a whole host of other things.

It started to clicking for me... It clicked everyday, the whole pc hanged, I needed to reset, turn off etc... And when I re-partitioned it, it became perfect, and not a single clicking happened from that. This happened 2 years ago, and the hd works perfectly everyday from then. I'm using it right now too. So no, it's not out. Atleast for me.

Since i have changed the cable there have been no clicks at all, even now that i am transfering around 300GB of data from it. I don't think a randomly clicking drive means its on its way out the door to a tearful goodbye, and i think the issue was the SATA cable, i would love to be proved wrong but i cant see it happening.

are you still under warranty ? i had the same problem you are having & i ended up getting a replacement. from the time i placed the request to the day i got the replaced hd was 4 days

i live in the united states they sent the replacement drive out first & as soon as i got the replacement i sent the failing drive out

it only cost me $10.67

try hirens and use dos tool HDD Regenerator 2011

I will give it a try after my data is backed up

are you still under warranty ? i had the same problem you are having & i ended up getting a replacement. from the time i placed the request to the day i got the replaced hd was 4 days

i live in the united states they sent the replacement drive out first & as soon as i got the replacement i sent the failing drive out

it only cost me $10.67

Yeah i think i am still under warranty, i will try a few suggestions if those fail i will RMA the drive

try hirens and use dos tool HDD Regenerator 2011

All that does is try to recover data from damaged sectors and then marks them as bad. It can be helpful in file recovery but it won't save your drive. Back up everything and pull its life support plug, it's done. Even if it works for a while after running that utility, bad sectors have a tendency to spread. The drive should never be trusted again.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      462
    2. 2
      +Edouard
      213
    3. 3
      PsYcHoKiLLa
      158
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!