Recommended Posts

Hey everyone,

Right, I know this is a speculative thread and I've read the majority of websites out there debating about the iPhone 5 (4GS or whatever)?

I'm due for an upgrade tomorrow with my carrier. I'm currently using a 3G (yup, old school). As some might remember, my 3G went for a swim about a year and a half ago... it's been working fine (relatively) up until recently (last month) whereby I basically can't get signal... the SIM is rarely detected as being in the phone, and this causes texts to be delayed or phone calls to go straight to voicemail etc...

So, I'm wondering, would you upgrade to the 4S? Or wait?

I can theoretically wait until August (when the contract actually runs out)? after then I'd have to figure something out if the new iPhone wasn't going to be until October... not to mention I'm not sure my phone will last...

Medking

Link to comment
https://www.neowin.net/forum/topic/1074195-upgrade-iphone-tomorrow/
Share on other sites

If you're having major problems with basic phone functions (i.e. calling and texting) then I'd definitely consider getting it repaired or buying a new device. It might be worth taking the iPhone down to an Apple Store to see if they can fix the problems. If that's not possible or they charge too high a price for the repair, then I'd just get the 4S (or whatever else) sooner rather than later.

It's likely that Apple will be sticking to an October release for new iPhones (doubt it'll be called 4GS, probably just "the new iPhone"), which is probably too long to hold off for if you're having the issues you've described. I'd say the jump from the iPhone 3G to 4S is pretty big anyway, plus you'll (most likely) receive the next iOS revision. If you feel ashamed of your 4S when the next iPhone does come out, you'll be able to sell it for a decent price (especially since you'll have a longer warranty to offer than others doing the same).

Thanks Manish - appreciate the response!

Yes unfortunately I did look at getting it repaired but because of the water damage to it Apple basically won't do anything with it... meaning I'd have to take it to a third party which tbh I'm not too bothered by.

Good suggestion though of selling it on. Not sure if I'm correct in saying this but I think O2 unlock for free... (at least they did back in the day) meaning I could probably get a fairly decent amount for it...

Thanks Manish - appreciate the response!

Good suggestion though of selling it on. Not sure if I'm correct in saying this but I think O2 unlock for free... (at least they did back in the day) meaning I could probably get a fairly decent amount for it...

No problem. And yes, O2 do still unlock iPhones for free at any time for Pay Monthly customers (you just need to fill out a form online).

I'd wait until iPhone 5 comes out...

But from what I've read that looks like it will be in October (reveal)? so that could mean released to the markets in November...

If it were June I could wait... but from what I've read that doesn't look like it will be the case?

Thanks Manish - appreciate the response!

Yes unfortunately I did look at getting it repaired but because of the water damage to it Apple basically won't do anything with it... meaning I'd have to take it to a third party which tbh I'm not too bothered by.

Good suggestion though of selling it on. Not sure if I'm correct in saying this but I think O2 unlock for free... (at least they did back in the day) meaning I could probably get a fairly decent amount for it...

apple will do an out of warranty replacement for ?120

Wait until June 11th ? that's the date of Apple's WWDC Keynote, and if they don't announce it then (including availability) they'll most likely announce it in September.

Thanks for the advice. Think I'm leaning on waiting atm. Shall see how I feel when I get up haha.

Another general question for everyone: what contract option would you go for? (i.e. would you preference data//texts etc, and what amounts?)

Also, what would you recommend going for (price-wise) for a contract?

Because doing some basic math it looks like going for the 32GB with only 500MB of data, 100 minutes, and currently unlimited texts as a free extra is the cheapest. (21.50 a month plus cost of phone)?

But then I don't know if 500MB is enough for the 4S? Many seem to indicate that going for a gig is safer. (100 minutes would be more than enough, I barely use minutes at all)

Any recommendations in that area would be appreciated... do you think it's worth paying more up front for a marginally cheaper contract?

I would say you better wait for iPhone 5 :) You don't want to regret for another 2 years, right? Better patiently wait for a few months with a "crappy" phone heh heh as the next iPhone is meant to be revolutionary

I'm on a 250 MB and it's enough for me :) I don't watch YouTube on my data and I can wait for Wi-Fi connection to update my apps

Possible to buy a cheap inbetween phone?

I really agree with iKenndac. Wait until after the next big Apple event if at all possible. If they don't say squat about it, probably not until Octoberish. I suspect it will have LTE (in the US anyway).

I have a 200MB plan. Overall I wanted to go cheap. I probably watch 2-3 YouTube videos a month over 3G. Meh, WiFi is so available the only time I need to bump it up is when I'm using Google Maps to get around a lot and streaming audio. When I go out of town I tend to use a lot more data.

This topic is now closed to further replies.
  • Posts

    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      594
    2. 2
      +Edouard
      187
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      74
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!