Show Us Your Server [2012]


Recommended Posts

Cant go wrong with the HP Micro Servers, i believe mine was ?110 after the ?100 cashback.

Currently got 5x 2TB drives in mine, running Windows Home Server 2011, it makes a great little NAS / Server.

I'll have to post a pic of the cupboard it lives in when im home.

Do you know how much power it pulls? I have an UPS connected to my server and it does about 220 Watts 24.7 - I'm interested to know what yours pulls I'd expect lower than 60 watts from the wall.

I have a server with a similar E-350 motherboard. At idle with all the hard drives spun down it does ~30Watts the wall. With the 5 drives spinning it does around ~60W I believe (It's been a while since I last checked).

Mine are in the loft too, which is where my room is aswell...

If your loft is converted into a room, with proper roof insulation then I could understand, but putting a server in the loft with just felt and tile on the roof... that must be like putting a server in an oven!

Stereopixels looks like a normal loft from the images, with boxes and random floor boarding... :s

<snip>

What bracket wall mount have you used with that monitor?

I have a server with a similar E-350 motherboard.

Which board did you get? I'm thinking of building another with an ASUS e35 as it is already fanless and comes with 5 SATA on board.

If you check my photo of my servers, it's in a seperate room with just the felt etc.

thankfuly though it's a big old area so probably doesn't get much hotter than 30oc :rofl:

but they've been on 24/7 for 3 years plus, apart from the odd power cut.

I need to install cpuid or whatever it's called to see how hot there running

Which board did you get? I'm thinking of building another with an ASUS e35 as it is already fanless and comes with 5 SATA on board.

I have the MSI E350IA-E45, but I have a standalone 4-port raid card for RAID-5, since the board only supports RAID 0/1.

Cant go wrong with the HP Micro Servers, i believe mine was ?110 after the ?100 cashback.

Currently got 5x 2TB drives in mine, running Windows Home Server 2011, it makes a great little NAS / Server.

I'll have to post a pic of the cupboard it lives in when im home.

Microservers FTW! Does the whole world have these? hehe

What bracket wall mount have you used with that monitor?

Just a cheap one from eBuyer. But I've only used the monitor once since it going in there, which was to configure the networking. Everything else is handed by ESX or SSH.

Seriously, MicroServers are the best things since sliced bread :D

yup micro server here as well, N40L - sweet little box, and price is hard to beat! Add more ram, extra nic and fill it up with the space you need. Provides me with my router, my nas and my linux shell box plus anything else I want to play with at the moment via VMs on esxi.

The HP Micro Server NL36:

  • AMD's Athlon II Neo N36L @ 1.3ghz
  • 3gb DDR3 ram
  • 5x 2TB 5900rpm Seagate Green Drives
  • Windows Home Server 2011
  • Serves files and media on the network
  • Backs up each PC daily as well as doing a few other other misc tasks.

hpserver-july2012.jpg

It sits in a cupboard next to my desk, that's the first time i've actually seen it in months.

Asus RT-N16 router (Tomato Firmware)

  • Does all the routing tasks you would expect
  • IPV6 via Hurricane Electric
  • Dynamic DNS updates
  • Open VPN server
  • SSH server

network-july2012.jpg

Fractal Design Define R3 ESXi 5.0 VMware Server ~ 120 - 150 watts

- AMD 1090T 3.2 GHz

- 16 GB RAM

- 1.5 TB RAID5

- 320 GB RAID1

- 200 GB RAID1

Dell Power Edge 1650 Ubuntu Server ~ test server, doesn't stay on all the time

- Dual Intel Pentium III 1400s - 1.4 GHz

- 4 GB RAM

- 36 GB RAID5

AMD APU e350 based Nas4Free with 6 Gbit/s eSATA link to external enclosure. ~ 25 - 50 watts

- AMD Brazos E-350 1.6 GHz

- 8 GB RAM

- 9 TB ZFS Storage (2 x Raidz single parity pools)

Intel Atom D510 based Nas4Free ~ 15 - 30 watts

- Intel Atom D510 1.6 GHz

- 4 GB RAM

- 300 GB ZFS Storage (1 x Raidz mirror pool)

Several older Antec cases with original Athlon, Athlon XP, along with via KT133, and nVidia nForce2 motherboards.

7653536136_7787fc8600_b.jpg

7653535294_15ab457053_b.jpg

7653537338_0446777498_b.jpg

7653535540_58b7030f3f_b.jpg

Inside the ESXi box

6129263108_b0359acf61_b.jpg

NAS drives during build

7111449207_ab7754d426_b.jpg

Workstation

7654005046_79ec95563b_b.jpg

  • 2 weeks later...

post-26332-0-20903300-1344875565_thumb.j

Case: http://www.newegg.co...N82E16811146072

Processor: http://www.newegg.co...N82E16819103911

Motherboard: http://www.newegg.co...N82E16813157200

Memory: 16GB: http://www.newegg.co...N82E16820104239 x2

Hard drives: 8x 2 TB: http://www.newegg.co...N82E16822152245

RAID controller: DELL PERC 6/I: http://www.dell.com/...=us&l=en&cs=555

CPU cooler: http://www.newegg.co...N82E16835181015

OS: Windows Server 2008 R2

Serves as my file server for storing my photography, Movies, TV shows (for XBMC streaming), Hyper V server for Exchange/AD/DNS/DHCP, SVN, as well as compiling XBMC builds.

Wait, wasn't sure if this was "home" servers or business servers :). In my case i have both so i'll edit this later when i get home to post my Home server as well just in case :)

I was hoping Both! What you worked which might be cool if some people worked at some cool places and home also since I would say 90% of us have a Microsever lol!

I really need to dust off the ol HP Home Server I was given and set it up as a media streamer for the house, just think It'll be a hassle to get running with anything other than Windows Home Server, all it has is USB ports and a NIC

Nothing against proper server rooms? :D

Here's a glimpse in one of the two rooms I'm in charge of. Currently Showing an EVA 6400 Array, a HP C7000 Blade enclosure and some old rack I'm currently moving stuff out of.

pPEZMl.jpg

Regarding my own home server, specs are in the sig, it's housed in a (ginormous) Enermax Fulmo GT. (the pic shows an Antec Nine Hundred, I didn't bother change the pic yet xD)

WHO00ooo00ooaaaaaa.... :fro: :drool: No that's some server room PORN!

Definitely that's something to drool about. One day wanna be in charge of a room like that. I work in small business now so not really IT per say but I've tried to clean up the mess before me and bosses just say i'm wasting time. I wanna make things all neat like yours and put things in the proper place but i just have cables going all over the place, did some rewiring but as long as it's working they don't care I guess.

I'll put the work server here then edit my older post to post my "home" server :)

2 Dell PowerEdge 2950s - Windows SBS 2003R2 :( - 3 SAS/SATA drives in RAID5 like 500GB each server. I'm wanna upgrade the software at least since Server 2003 is barely even supported anymore. Wanna upgrade to 2008R2 or 2012 (!) and Exchange 2010, that should be sweet and last us for another 5-10yrs but guess that wont be happening till they break!

Got a 3rd PowerEdge 2950 (not shown) that i'm gonna put Windows Server 2012 (from TechNet) to see how it runs on this hardware. Some good salesman got the boss to buy all this stuff when we barely need 1 of them. Got another older Dell PowerEdge 840 Tower also that's not being used.

1 APC SmartUPS 2200VA

Network rack is out in "server room" - The room was too small to host this cage so ran 2 CAT6 lines to this space for 1Gbps to each server (top one is file server for about 10 users that sync and store pictures from reports there). Bottom one is AD/DNS/DHCP/Exchange server.

post-698-0-78865800-1345124022_thumb.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!