Seagate to buy LaCie for $186 million


Recommended Posts

hd.jpg

Seagate and LaCie have gotten friendly before -- the former company's drives are in the LaCie 2big Thunderbolt HDD, for instance -- but the storage makers are about to get even cozier. Today, Seagate announced its plans to buy a 64.5-percent share in the French company, which is currently valued at $186 million. The acquisition will combine the two outlets' product portfolios and, according to the press release, "accelerate Seagate's growth strategy in the expanding consumer storage market, particularly in Europe and Japan." The deal should go through by late 2012, and Seagate will bring over LaCie CEO Philippe Spruch to head the consumer storage products division.

http://www.engadget.com/2012/05/23/seagate-to-buy-lacie/

I truly hope that the purchase doesn't affect LaCie's design. While LaCie's hardware selection (including controllers and power supplies) has a lot to improve, LaCie is one of the few that produces accessories cased in something else than branding riddled, glossy finger print magnet, low quality fragile plastic.

Not a big fan or seagate or lacie since i dont feel like they make good quality product.(maybe its just me)

I own WD products and they seem to last longer at least for me. own a 250Gb external hard drive for 4 years without issues.

Hopefully they comeup with quality product with out killing competion.

Anyone remember when Seagate said they would do a 5 year warranty on ALL of their drives?

http://5yrwarranty.seagatestorage.com/

Anyone notice they've killed 95% of their warranties down to either 1 or 2 year now and all of the manufacturers are doing the same thing? I wonder if there are behind the scenes talks going on between these companies because at least ONE company should still stand behind their products....

Quote from the top PDF on that page:

SCOTTS VALLEY, Calif. ? July 26, 2004 ? Seagate Technology (NYSE:STX), the world?s leading hard disc drive maker, today announced it has introduced a 5-year warranty, effective immediately, on every Seagate internal PC, notebook and enterprise hard drive shipped through its distribution and retail channels throughout the world.

Anyone remember when Seagate said they would do a 5 year warranty on ALL of their drives?

http://5yrwarranty.seagatestorage.com/

Anyone notice they've killed 95% of their warranties down to either 1 or 2 year now and all of the manufacturers are doing the same thing? I wonder if there are behind the scenes talks going on between these companies because at least ONE company should still stand behind their products....

Quote from the top PDF on that page:

SCOTTS VALLEY, Calif. ? July 26, 2004 ? Seagate Technology (NYSE:STX), the world?s leading hard disc drive maker, today announced it has introduced a 5-year warranty, effective immediately, on every Seagate internal PC, notebook and enterprise hard drive shipped through its distribution and retail channels throughout the world.

And between then and now we've had a double-dip recession. Companies priorities change with economic climate.

it is really concerning

HDD makers keep decreasing :( i hope that doesn't mean inflated HDD price in the future

It isn't really a big loss. At one time there were only 3 hard drive manufacturers I can recall; WD, Seagate and Hitachi. Prices didn't decrease dramatically when the cheapo brands like LaCie and Memorex entered the hard drive market, they decreased as bigger sized drives became available and cost to manufacture decreased.

It isn't really a big loss. At one time there were only 3 hard drive manufacturers I can recall; WD, Seagate and Hitachi. Prices didn't decrease dramatically when the cheapo brands like LaCie and Memorex entered the hard drive market, they decreased as bigger sized drives became available and cost to manufacture decreased.

i mean they are bigger chance now for price fixing and other abuse measures

would be far more damaging since the market become much bigger from back than

Not a big fan or seagate or lacie since i dont feel like they make good quality product.(maybe its just me)

I own WD products and they seem to last longer at least for me. own a 250Gb external hard drive for 4 years without issues.

Hopefully they comeup with quality product with out killing competion.

I always find it interesting how varying people's experiences can be. For me I have had HORRIBLE luck with WD. Every drive I've ever had has failed within a year, one within weeks of owning it. Whereas my Seagates just run and run without a single problem. It's just so weird. lol

Actually Seagate and WD are very good. I have pulled my computer apart last night after it was last setup 5 years ago and was surprised to see the dates on my drives. One, a Seagate, is from 2006, the others, WDs, are from 2008-9. I have a Seagate 8.4 GB (yes you read that right EIGHT point FOUR GIGABYTES) from my first computer, 1999 and still works great. I still use it as a Windows install disk. I have a couple smaller ones even older and I'm sure they still work fine. however I did have my share of unlucks with some drives failing but a simple replacement solves them.

Just got myself a new 2 TB LaCie d2 Quadra v3 FireWire 800/USB 3.0 2TB as an addition to my 750 GB LaCie d2 Quadra v2 FireWire 800/USB 2.0. The latter served me well for the past five years, but it was getting a bit too small. Will still make a good Time Machine backup drive though. (Y)

I honestly don't know why people feel LaCie's are cheap. Especially the d2 Quadra design is amazing: they're made of aluminum, feel extremely solid, are heavy, come with a three-year warrantee and overall just plain sexy looking (IMO at least). I know there are lots of stories on the internet about failing drives, although I've heard similar stories just about any brand. Personally my WesternDigital MyBook 500 GB failed after only 1,5 years of average use and it never received a software update for OS X Leopard, something I was extremely ****ed off about.

post-128385-0-14773900-1338591778_thumb.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!