Geoff Keighley confirms Wii U won


Recommended Posts

What does real time have to do with it. Do you even play games and u deist and how this works

I click the "use scanner" button, the marine on my screen(me) puts away his gun, that is visible in his(my) hands on the screen, and pulls out the scanner, in 3d on the screen, in his(my) hands. Oh and here's the kicker, in real time. And thus I'm holding the scanner in my characters hands, properly immersive in the game world, and the gun is towed as it should be. When the aliens approach, I properly need to replace the scanner with my gun again. Unless I'm using one of the big ass guns with the scanner attached.

All this, in real time, on the screen, in the game world, immersively. Not outside the game world, on a cheap plastic device that doesn't look like it belongs on a magical second pair of hands (?!!!).

No let say ya do that then you only get the scanner on the GP screen not the the big screen you wont get duplicate screens unless ya choose to in the game options the gun itself is on the big screen the FPS view the scanner is completly separate thing running independently from what is happening on the big screen thus this show you have barly paid much attention to anything you just assume. Wii U can have 2 destictly differant things running at the same time on each screen or have the same thing running .

Now in some games like Zombie U when ya use a scanner you end up viewing the game world in a different way on the GP screen to scan the world but that does not take you out of the danger within the game world as zombies still could creep up on you as your doing that which is why that is a survival horror .

Here is a good example of Multiplayer call of duty black ops 2 on Wii U one user using the GP screen while the otehr uses the big screen the game on the Big screen running @ full 1080p 60FPS while some siad from what they was told the GP running @ 60FPS as well

No let say ya do that then you only get the scanner on the GP screen not the the big screen you wont get duplicate screens unless ya choose to in the game options the gun itself is on the big screen the FPS view the scanner is completly separate thing running independently from what is happening on the big screen thus this show you have barly paid much attention to anything you just assume. Wii U can have 2 destictly differant things running at the same time on each screen or have the same thing running .

When did I say duplicate "screens". are you even paying attention or just making stuff up for your own arguments ?

Also the gun being on the screen and the scanner in the hand was EXACTLY my point, that's NOT possible, the marine can only hold one of them at a time, unless you have one of the big guns with a scanner attached, in which case it'll be one the gun anyway. having the scanner makes non sense and only serves to de-immerse you out of the game and game universe.

and no I'm not assuming anything I never said it can't have two different things, don't know where you're getting this idea outside of not paying attention and just making up arguments. Because you're certainly not reading my posts, that's clear as day.

My main problem about the WiiU s that while they try to advertise it as a new core gamer platform, even on the deluxe model, I have to buy the core/standard controller(or what they call the pro controller) separately.

What does real time have to do with it. Do you even play games and u deist and how this works

I click the "use scanner" button, the marine on my screen(me) puts away his gun, that is visible in his(my) hands on the screen, and pulls out the scanner, in 3d on the screen, in his(my) hands. Oh and here's the kicker, in real time. And thus I'm holding the scanner in my characters hands, properly immersive in the game world, and the gun is towed as it should be. When the aliens approach, I properly need to replace the scanner with my gun again. Unless I'm using one of the big ass guns with the scanner attached.

All this, in real time, on the screen, in the game world, immersively. Not outside the game world, on a cheap plastic device that doesn't look like it belongs on a magical second pair of hands (?!!!).

Well many have stated the Wii U gamepad feels rugged in your hand and does not feel cheap

There is no scanner button to click not in Aliens CM here is the developer talking about the Wii U version note the game footage they show while video is going is form the Xbox 360 version and as you note you have to switch back and fourth between scanner and gun

There is no scanner button to click not in Aliens CM here is the developer talking about the Wii U version note the game footage they show while video is going is form the Xbox 360 version and as you note you have to switch back and fourth between scanner and gun

You just don't want to get it do you.

No there is no scanner button because it uses the pad. which is wrong and de-immersive compared to having a button that switched between a scanner and the gun in your characters hand on the screen, int he gameworld

You just don't want to get it do you.

No there is no scanner button because it uses the pad. which is wrong and de-immersive compared to having a button that switched between a scanner and the gun in your characters hand on the screen, int he gameworld

Difference of opinion, but I think having something that acts like something from the gameworld directly in your hand is more immersive than it just being all on your TV. I mean, it's in the name. If you want something to be immersive, you have to immerse yourself in the game world. And unless you want to actually get inside the TV, the only other way to do that is to make the gameworld expand outside of the TV.

Obviously that relies on what's on the gamepad being implemented naturally and frustration free, so it feels like part of the game world, and not something you want to smash against a brick wall because it doesn't work :p

I think the Arkham City implementation for the GamePad looks alright but generally I find most implementations to be really weak and distracting. With Zombie U you keep getting messages on screen to tell you to look at the GamePad, which completely destroys immersion.There are definitely some interesting ideas but it really seems they're using it for the sake of it, rather than because it genuinely improves the gaming experience. Further, the videos are misleading because you don't really appreciate how small a 6" screen is - it's barely bigger than a phone screen and will be quite jarring when looking away from a 40"+ display.

And I'm not singling out the Wii U. I thought it was just as stupid when Killzone 3 on the PS3 implemented all sorts of motion controls to play to the unique controller but it was all incredibly forced and distracted from the game.

except you still end up with the duplicate pair of hands and a plastic device that doesn't look like a scanner acting like a scanner, and somehow you have one pair of hands with a gun and one pair of hands outside the gameworld with a scanner.

that's the thing with big screen tv's you are "in" the tv, you are in the world. when you pull out the pad controller, you need to look at something else outside of the gameworld, and it doesn't even look like it belongs in the gameworld.

you could draw parallels to driving, when driving you're not supposed to watch the speedometer, but watch the road, as looking at the speedo takes concentration away from the road and driving. hence why there's starting to experiment with HUD speedo's.

Still I think if thye're advertising the delux model for core gamers, they should have included a "pro" controller.

With Zombie U you keep getting messages on screen to tell you to look at the GamePad, which completely destroys immersion.There are definitely some interesting ideas but it really seems they're using it for the sake of it, rather than because it genuinely improves the gaming experience.

I think in the case on ZombiU, they were trying to add to the suspense by purposely getting you to look away from the main screen whilst the action was still going on as it doesn't pause the action, even if you do open up your inventory or are trying to pick a lock on a door, which adds an element of risk. So you've still got a full view of your game world on the main screen and can look behind you or infront of you, but you purposefully can't do that at the same time you're messing about with whatever on the gamepad. Ergo, you're meant to try and find a safe place before you actually use your gamepad screen for anything. In the case of a "thriller / horror" game that can add somewhat to the immersion / atmosphere of suspense, especially if you quickly glance up from messing with your inventory to see a zombie has managed to lumber right infront of your face :p It's not an idea that suits every game, but it theoretically adds something here.

One thing I'm not a fan of is developers insisting on adding motion controls to things that could be done with an analogue stick.

Skyrim also doesn't pause the game necessarily in the inventory management and allows you to see what's happening behind the transparent inventory screen. I'm not really seeing that argument :/

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

I think in the case on ZombiU, they were trying to add to the suspense by purposely getting you to look away from the main screen whilst the action was still going on as it doesn't pause the action, even if you do open up your inventory or are trying to pick a lock on a door, which adds an element of risk.

I appreciate that, though it is one of the launch titles and they will have been working closely with Nintendo. It breaks immersion more than it contributes to it. The only thing the GamePad is really good for is asymmetric gameplay, though only a small number of games are going in that direction and they require you to play with other players.

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

This guy gets it! Same thing with Aliens. If people actually WATCHED the damn movie, you would see that when they are using the motion tracker...THEY ARE LOOKING AT IT. Having a separate screen for the tracker is a brilliant idea.

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

but then you might as well just do a non transparent inventory screen, if I'm not entirely mistaken the old RE games did just that.

This guy gets it! Same thing with Aliens. If people actually WATCHED the damn movie, you would see that when they are using the motion tracker...THEY ARE LOOKING AT IT. Having a separate screen for the tracker is a brilliant idea.

How is it a better idea, then having a tracker in your marine's hand as it is in the movies ? also disabling your gun which is then holstered. addign to suspense.

I'm not seeing brilliance I'm seeing awkward, non immersive clumsy use of a gimmick just to say "hey look how cool this is, we're using a out of game scree for this stuff".

How is it a better idea, then having a tracker in your marine's hand as it is in the movies ? also disabling your gun which is then holstered. addign to suspense.

I'm not seeing brilliance I'm seeing awkward, non immersive clumsy use of a gimmick just to say "hey look how cool this is, we're using a out of game scree for this stuff".

How well did disabling the gun work in Doom 3 when you wanted to use a flash light? It was first thing that was modded and fixed because it sucked.

You obviously have a bug up your ass about the Wii-U. Maybe it's time you jogged on.

I'm sorry I though you wanted immersion, so you want immersion only as long as it doesn't make it dangerous or makes you take risks ?

being able to have both is the opposite of immersion. and a flashlight and the scanner isn't even comparable in that regard. since the point of the scanner is to warn you of danger. and when yo get big huge guns, the scanner is mounted on them anyway. how is that going to work on the WiiU. you'll have two scanners ? or it'll be the only version fo the game without a scanner on the big harness guns ?

I don't have a bug up my ass about it, I'll be buying one, I have issues with bad and/or gimmicky use of features. the pad can be great for certain uses cases. this is not one of them. good use cases are doing thing you can't otherwise do in game. like drawing tactics for madden. or something Nintendo demonstrated before with zelda on the DS, where the touch was used for drawing boomerang flight patterns.

Give me imaginative and innovative uses of the screen. not gimmicky crap that breaks immersion on what would otherwise be a good core game. this is the stuff that will drive core gamers away form the Wii and onto the 360 and PS3 if it's a forced option and you can't play it without it, and instead a proper on screen, in world scanner.

  • Like 1

Sorry, not it doesn't make ANY sense. What would make sense if my character on the screen, put his weapon away, and held the tracker out in front of him as a 3D model. in this situation you can have the weapon out and watch the scanner at the same time. which was only possibly on the bigger guns with the tracker attached to the gun itself. which oh wait is also possible when it's done in game with the proper 3D models. AMAZING. and far more immersive and properly done.

The tracker does not look like a white plastic toy outside of the gameworld. in the geeky hands of a gamer that exists outside the gameworld. that is NOT immersive. that is taking you as far out of the gameworld as possible. and since the game is made for multiple platform. I'll bet they have the option to use in game trackers on the WiiU version as well, and that's what gamers are going to be using because it keeps eyes on the gameworld and is properly in game immersive. the tablet controller version will only be used to show of to friends, and the second they're out the door, you'll change back to the in game version.

and yes, Smartglass requires premium for watching rented content that requires premium or for multiplayer games :rolleyes:

I can understand your sentiment from one side, but I don't think it's right. One of the big problems with an FPS is lack of proprioception, so in that aspect an over the shoulder 3rd person view is actually more immersive, because you effectively have the field of view that you would actually have, and you know when you're close to a ledge or a wall that you'd normally be able to tell by feel. Immersion is sometimes about forgetting about all the little hassles that the medium makes for you. On the one hand Mirror's Edge is very immersive, on the other hand it constantly rips you out because you don't actually have any sense of feel (or smell). Really realistic graphics can also be immersive, but then the uncanny valley comes in and rips you out. If you've got the tracker on the Wii pad, you can just glance down to it and back up, and not worry about the controls getting in the way, or a slow animation of swapping the tracker out for your weapon while an Alien is leaping at you.

Resistive screens only need to be calibrated if you move the overlay layer from it's default position over the LCD. Otherwise it's perfectly calibrated in the factory, and isn't going to magically lose it's calibration - and that overlay layer isn't going to move unless you try to rip it out. And again, resistive screens with a stylus allow pixel perfect accuracy. With a capacitive screen, nearly nothing does unless you have a digitiser. It's a well known scientific fact that capacitive screens by design offer less accuracy than resistive, in exchange for better responsiveness.

If what you say were true, I wouldn't have had to calibrate every resistive touch screen PDA I ever had.

The controller also weights only 500g (for comparison, an Xbox 360 wired controller is 300g, and a wireless one with a good set of rechargeable batteries edges that to around the 400g mark), so it's quite light for what it is.

A Nexus 7 weighs 340g, that resistive screen certainly isn't helping it get any lighter, and a capacitive screen wouldn't make it heavier in any meaningful way.

I also don't know if you've ever seen a matte capacitive screen? People don't tend to make them. To be fair, I don't actually know why, but I assume there's some sort of technical or cost reason.

There's no technical or cost reason. Glossy just looks better in store, it makes the colours more vibrant. That's the only reason, they sell better to people who don't know any better. That, and Apple started doing it so everyone felt they needed to copy.

It also means the touchscreen is more rugged without glass. I could drop the controller on the floor many times (which, let's face it, is going to happen to a lot of these controllers), and not be worried about cracking glass, because instead of glass I have layers of durable plastic over a durable plastic screen coating.

The glass or plastic isn't going to be the issue, the fact that the screen is recessed into the controller is what will protect it from breaking. And if you do have something break, it's better that it's the glass than the LCD panel (which is what will break if you've got a resistive screen).

My main problem about the WiiU s that while they try to advertise it as a new core gamer platform, even on the deluxe model, I have to buy the core/standard controller(or what they call the pro controller) separately.

I don't see why you would need to. The tablet controller does everything you'd need it to - whether you like the wide grip would be a matter of preference.

It's a system for little kids and housewives (for exercise). I don't think it was intended to be a hardcore competitor to the other big name consoles.

What are you talking about this is not the Wii this is made for the hardcore crowed and has plenty of hardcore games coming to it in the launch window you are thinking all wrong

If what you say were true, I wouldn't have had to calibrate every resistive touch screen PDA I ever had.

A Nexus 7 weighs 340g, that resistive screen certainly isn't helping it get any lighter, and a capacitive screen wouldn't make it heavier in any meaningful way.

The glass or plastic isn't going to be the issue, the fact that the screen is recessed into the controller is what will protect it from breaking. And if you do have something break, it's better that it's the glass than the LCD panel (which is what will break if you've got a resistive screen).

Your old PDA's using old resistive teach screens? Tell me, when was the last time you ever saw anyone have to recalibrate their DS or 3DS, something with a more recent resistive touch screen? They don't have to be recalibrated unless they've been physically changed. You calibrate a resistive screen to choose where on the resistive layer matches upto where on the LCD. Unless your device is either poorly coded and decides it wants to change those values itself, or you physically move where over the LCD panel the resistive layer is placed, those points are never going to change during device usage. Ergo, especially with the resistive screens we have today, the calibration done in factory is all that's ever needed.

A Nexus 7 has a capacitive screen - and a panel of glass is still going to weight more than two plastic films. If you drop a controller, the inner LCD panel is less likely to shatter than glass - moreso because that has it's own protective layer coating underneath the two plastic resistive layers on top of it, which do a nice job of absorbing impact. Worse, if the glass breaks when a kid is playing with it, there's going to be angry parents about :p

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!