Geoff Keighley confirms Wii U won


Recommended Posts

What does real time have to do with it. Do you even play games and u deist and how this works

I click the "use scanner" button, the marine on my screen(me) puts away his gun, that is visible in his(my) hands on the screen, and pulls out the scanner, in 3d on the screen, in his(my) hands. Oh and here's the kicker, in real time. And thus I'm holding the scanner in my characters hands, properly immersive in the game world, and the gun is towed as it should be. When the aliens approach, I properly need to replace the scanner with my gun again. Unless I'm using one of the big ass guns with the scanner attached.

All this, in real time, on the screen, in the game world, immersively. Not outside the game world, on a cheap plastic device that doesn't look like it belongs on a magical second pair of hands (?!!!).

No let say ya do that then you only get the scanner on the GP screen not the the big screen you wont get duplicate screens unless ya choose to in the game options the gun itself is on the big screen the FPS view the scanner is completly separate thing running independently from what is happening on the big screen thus this show you have barly paid much attention to anything you just assume. Wii U can have 2 destictly differant things running at the same time on each screen or have the same thing running .

Now in some games like Zombie U when ya use a scanner you end up viewing the game world in a different way on the GP screen to scan the world but that does not take you out of the danger within the game world as zombies still could creep up on you as your doing that which is why that is a survival horror .

Here is a good example of Multiplayer call of duty black ops 2 on Wii U one user using the GP screen while the otehr uses the big screen the game on the Big screen running @ full 1080p 60FPS while some siad from what they was told the GP running @ 60FPS as well

No let say ya do that then you only get the scanner on the GP screen not the the big screen you wont get duplicate screens unless ya choose to in the game options the gun itself is on the big screen the FPS view the scanner is completly separate thing running independently from what is happening on the big screen thus this show you have barly paid much attention to anything you just assume. Wii U can have 2 destictly differant things running at the same time on each screen or have the same thing running .

When did I say duplicate "screens". are you even paying attention or just making stuff up for your own arguments ?

Also the gun being on the screen and the scanner in the hand was EXACTLY my point, that's NOT possible, the marine can only hold one of them at a time, unless you have one of the big guns with a scanner attached, in which case it'll be one the gun anyway. having the scanner makes non sense and only serves to de-immerse you out of the game and game universe.

and no I'm not assuming anything I never said it can't have two different things, don't know where you're getting this idea outside of not paying attention and just making up arguments. Because you're certainly not reading my posts, that's clear as day.

My main problem about the WiiU s that while they try to advertise it as a new core gamer platform, even on the deluxe model, I have to buy the core/standard controller(or what they call the pro controller) separately.

What does real time have to do with it. Do you even play games and u deist and how this works

I click the "use scanner" button, the marine on my screen(me) puts away his gun, that is visible in his(my) hands on the screen, and pulls out the scanner, in 3d on the screen, in his(my) hands. Oh and here's the kicker, in real time. And thus I'm holding the scanner in my characters hands, properly immersive in the game world, and the gun is towed as it should be. When the aliens approach, I properly need to replace the scanner with my gun again. Unless I'm using one of the big ass guns with the scanner attached.

All this, in real time, on the screen, in the game world, immersively. Not outside the game world, on a cheap plastic device that doesn't look like it belongs on a magical second pair of hands (?!!!).

Well many have stated the Wii U gamepad feels rugged in your hand and does not feel cheap

There is no scanner button to click not in Aliens CM here is the developer talking about the Wii U version note the game footage they show while video is going is form the Xbox 360 version and as you note you have to switch back and fourth between scanner and gun

There is no scanner button to click not in Aliens CM here is the developer talking about the Wii U version note the game footage they show while video is going is form the Xbox 360 version and as you note you have to switch back and fourth between scanner and gun

You just don't want to get it do you.

No there is no scanner button because it uses the pad. which is wrong and de-immersive compared to having a button that switched between a scanner and the gun in your characters hand on the screen, int he gameworld

You just don't want to get it do you.

No there is no scanner button because it uses the pad. which is wrong and de-immersive compared to having a button that switched between a scanner and the gun in your characters hand on the screen, int he gameworld

Difference of opinion, but I think having something that acts like something from the gameworld directly in your hand is more immersive than it just being all on your TV. I mean, it's in the name. If you want something to be immersive, you have to immerse yourself in the game world. And unless you want to actually get inside the TV, the only other way to do that is to make the gameworld expand outside of the TV.

Obviously that relies on what's on the gamepad being implemented naturally and frustration free, so it feels like part of the game world, and not something you want to smash against a brick wall because it doesn't work :p

I think the Arkham City implementation for the GamePad looks alright but generally I find most implementations to be really weak and distracting. With Zombie U you keep getting messages on screen to tell you to look at the GamePad, which completely destroys immersion.There are definitely some interesting ideas but it really seems they're using it for the sake of it, rather than because it genuinely improves the gaming experience. Further, the videos are misleading because you don't really appreciate how small a 6" screen is - it's barely bigger than a phone screen and will be quite jarring when looking away from a 40"+ display.

And I'm not singling out the Wii U. I thought it was just as stupid when Killzone 3 on the PS3 implemented all sorts of motion controls to play to the unique controller but it was all incredibly forced and distracted from the game.

except you still end up with the duplicate pair of hands and a plastic device that doesn't look like a scanner acting like a scanner, and somehow you have one pair of hands with a gun and one pair of hands outside the gameworld with a scanner.

that's the thing with big screen tv's you are "in" the tv, you are in the world. when you pull out the pad controller, you need to look at something else outside of the gameworld, and it doesn't even look like it belongs in the gameworld.

you could draw parallels to driving, when driving you're not supposed to watch the speedometer, but watch the road, as looking at the speedo takes concentration away from the road and driving. hence why there's starting to experiment with HUD speedo's.

Still I think if thye're advertising the delux model for core gamers, they should have included a "pro" controller.

With Zombie U you keep getting messages on screen to tell you to look at the GamePad, which completely destroys immersion.There are definitely some interesting ideas but it really seems they're using it for the sake of it, rather than because it genuinely improves the gaming experience.

I think in the case on ZombiU, they were trying to add to the suspense by purposely getting you to look away from the main screen whilst the action was still going on as it doesn't pause the action, even if you do open up your inventory or are trying to pick a lock on a door, which adds an element of risk. So you've still got a full view of your game world on the main screen and can look behind you or infront of you, but you purposefully can't do that at the same time you're messing about with whatever on the gamepad. Ergo, you're meant to try and find a safe place before you actually use your gamepad screen for anything. In the case of a "thriller / horror" game that can add somewhat to the immersion / atmosphere of suspense, especially if you quickly glance up from messing with your inventory to see a zombie has managed to lumber right infront of your face :p It's not an idea that suits every game, but it theoretically adds something here.

One thing I'm not a fan of is developers insisting on adding motion controls to things that could be done with an analogue stick.

Skyrim also doesn't pause the game necessarily in the inventory management and allows you to see what's happening behind the transparent inventory screen. I'm not really seeing that argument :/

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

I think in the case on ZombiU, they were trying to add to the suspense by purposely getting you to look away from the main screen whilst the action was still going on as it doesn't pause the action, even if you do open up your inventory or are trying to pick a lock on a door, which adds an element of risk.

I appreciate that, though it is one of the launch titles and they will have been working closely with Nintendo. It breaks immersion more than it contributes to it. The only thing the GamePad is really good for is asymmetric gameplay, though only a small number of games are going in that direction and they require you to play with other players.

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

This guy gets it! Same thing with Aliens. If people actually WATCHED the damn movie, you would see that when they are using the motion tracker...THEY ARE LOOKING AT IT. Having a separate screen for the tracker is a brilliant idea.

Yes, but that's on the same screen. The point of ZombiU was to get you to look AWAY from the main screen when you're working on inventory / lock picking / looting etc, so you can't concentrate on both incoming Zombies and what you needed to do at once - thereby attempting to heighten the risk / suspense / shock factor when you look up and you're about to get eaten by a bunch of goons who have turned up out of nowhere whilst you were messing with your inventory. (Also technically more "immersive", because that's how things would work in reality too, assuming a Zombie take over were ever to happen :p)

but then you might as well just do a non transparent inventory screen, if I'm not entirely mistaken the old RE games did just that.

This guy gets it! Same thing with Aliens. If people actually WATCHED the damn movie, you would see that when they are using the motion tracker...THEY ARE LOOKING AT IT. Having a separate screen for the tracker is a brilliant idea.

How is it a better idea, then having a tracker in your marine's hand as it is in the movies ? also disabling your gun which is then holstered. addign to suspense.

I'm not seeing brilliance I'm seeing awkward, non immersive clumsy use of a gimmick just to say "hey look how cool this is, we're using a out of game scree for this stuff".

How is it a better idea, then having a tracker in your marine's hand as it is in the movies ? also disabling your gun which is then holstered. addign to suspense.

I'm not seeing brilliance I'm seeing awkward, non immersive clumsy use of a gimmick just to say "hey look how cool this is, we're using a out of game scree for this stuff".

How well did disabling the gun work in Doom 3 when you wanted to use a flash light? It was first thing that was modded and fixed because it sucked.

You obviously have a bug up your ass about the Wii-U. Maybe it's time you jogged on.

I'm sorry I though you wanted immersion, so you want immersion only as long as it doesn't make it dangerous or makes you take risks ?

being able to have both is the opposite of immersion. and a flashlight and the scanner isn't even comparable in that regard. since the point of the scanner is to warn you of danger. and when yo get big huge guns, the scanner is mounted on them anyway. how is that going to work on the WiiU. you'll have two scanners ? or it'll be the only version fo the game without a scanner on the big harness guns ?

I don't have a bug up my ass about it, I'll be buying one, I have issues with bad and/or gimmicky use of features. the pad can be great for certain uses cases. this is not one of them. good use cases are doing thing you can't otherwise do in game. like drawing tactics for madden. or something Nintendo demonstrated before with zelda on the DS, where the touch was used for drawing boomerang flight patterns.

Give me imaginative and innovative uses of the screen. not gimmicky crap that breaks immersion on what would otherwise be a good core game. this is the stuff that will drive core gamers away form the Wii and onto the 360 and PS3 if it's a forced option and you can't play it without it, and instead a proper on screen, in world scanner.

  • Like 1

Sorry, not it doesn't make ANY sense. What would make sense if my character on the screen, put his weapon away, and held the tracker out in front of him as a 3D model. in this situation you can have the weapon out and watch the scanner at the same time. which was only possibly on the bigger guns with the tracker attached to the gun itself. which oh wait is also possible when it's done in game with the proper 3D models. AMAZING. and far more immersive and properly done.

The tracker does not look like a white plastic toy outside of the gameworld. in the geeky hands of a gamer that exists outside the gameworld. that is NOT immersive. that is taking you as far out of the gameworld as possible. and since the game is made for multiple platform. I'll bet they have the option to use in game trackers on the WiiU version as well, and that's what gamers are going to be using because it keeps eyes on the gameworld and is properly in game immersive. the tablet controller version will only be used to show of to friends, and the second they're out the door, you'll change back to the in game version.

and yes, Smartglass requires premium for watching rented content that requires premium or for multiplayer games :rolleyes:

I can understand your sentiment from one side, but I don't think it's right. One of the big problems with an FPS is lack of proprioception, so in that aspect an over the shoulder 3rd person view is actually more immersive, because you effectively have the field of view that you would actually have, and you know when you're close to a ledge or a wall that you'd normally be able to tell by feel. Immersion is sometimes about forgetting about all the little hassles that the medium makes for you. On the one hand Mirror's Edge is very immersive, on the other hand it constantly rips you out because you don't actually have any sense of feel (or smell). Really realistic graphics can also be immersive, but then the uncanny valley comes in and rips you out. If you've got the tracker on the Wii pad, you can just glance down to it and back up, and not worry about the controls getting in the way, or a slow animation of swapping the tracker out for your weapon while an Alien is leaping at you.

Resistive screens only need to be calibrated if you move the overlay layer from it's default position over the LCD. Otherwise it's perfectly calibrated in the factory, and isn't going to magically lose it's calibration - and that overlay layer isn't going to move unless you try to rip it out. And again, resistive screens with a stylus allow pixel perfect accuracy. With a capacitive screen, nearly nothing does unless you have a digitiser. It's a well known scientific fact that capacitive screens by design offer less accuracy than resistive, in exchange for better responsiveness.

If what you say were true, I wouldn't have had to calibrate every resistive touch screen PDA I ever had.

The controller also weights only 500g (for comparison, an Xbox 360 wired controller is 300g, and a wireless one with a good set of rechargeable batteries edges that to around the 400g mark), so it's quite light for what it is.

A Nexus 7 weighs 340g, that resistive screen certainly isn't helping it get any lighter, and a capacitive screen wouldn't make it heavier in any meaningful way.

I also don't know if you've ever seen a matte capacitive screen? People don't tend to make them. To be fair, I don't actually know why, but I assume there's some sort of technical or cost reason.

There's no technical or cost reason. Glossy just looks better in store, it makes the colours more vibrant. That's the only reason, they sell better to people who don't know any better. That, and Apple started doing it so everyone felt they needed to copy.

It also means the touchscreen is more rugged without glass. I could drop the controller on the floor many times (which, let's face it, is going to happen to a lot of these controllers), and not be worried about cracking glass, because instead of glass I have layers of durable plastic over a durable plastic screen coating.

The glass or plastic isn't going to be the issue, the fact that the screen is recessed into the controller is what will protect it from breaking. And if you do have something break, it's better that it's the glass than the LCD panel (which is what will break if you've got a resistive screen).

My main problem about the WiiU s that while they try to advertise it as a new core gamer platform, even on the deluxe model, I have to buy the core/standard controller(or what they call the pro controller) separately.

I don't see why you would need to. The tablet controller does everything you'd need it to - whether you like the wide grip would be a matter of preference.

It's a system for little kids and housewives (for exercise). I don't think it was intended to be a hardcore competitor to the other big name consoles.

What are you talking about this is not the Wii this is made for the hardcore crowed and has plenty of hardcore games coming to it in the launch window you are thinking all wrong

If what you say were true, I wouldn't have had to calibrate every resistive touch screen PDA I ever had.

A Nexus 7 weighs 340g, that resistive screen certainly isn't helping it get any lighter, and a capacitive screen wouldn't make it heavier in any meaningful way.

The glass or plastic isn't going to be the issue, the fact that the screen is recessed into the controller is what will protect it from breaking. And if you do have something break, it's better that it's the glass than the LCD panel (which is what will break if you've got a resistive screen).

Your old PDA's using old resistive teach screens? Tell me, when was the last time you ever saw anyone have to recalibrate their DS or 3DS, something with a more recent resistive touch screen? They don't have to be recalibrated unless they've been physically changed. You calibrate a resistive screen to choose where on the resistive layer matches upto where on the LCD. Unless your device is either poorly coded and decides it wants to change those values itself, or you physically move where over the LCD panel the resistive layer is placed, those points are never going to change during device usage. Ergo, especially with the resistive screens we have today, the calibration done in factory is all that's ever needed.

A Nexus 7 has a capacitive screen - and a panel of glass is still going to weight more than two plastic films. If you drop a controller, the inner LCD panel is less likely to shatter than glass - moreso because that has it's own protective layer coating underneath the two plastic resistive layers on top of it, which do a nice job of absorbing impact. Worse, if the glass breaks when a kid is playing with it, there's going to be angry parents about :p

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • All these CEOs got the biggest boners thinking about firing employees for AI. Turned out it was just a wet dream.
    • And the fact that the majority of people from Poland are white European Christians while the people you are complaining about in post after post are not is just a coincidence... Every sentence in your post I am replying to is racist nonsense. None of it is actually based on any facts whatsoever. All immigrants are seeking a better life too. It's literally the only reason they would risk everything and leave their homes, families, and homeland. They are working and contributing to the economy too, as you even admit. They get the same benefits your partner did AND that YOU are eligible for as well. That is one of the key things of the EU and a mark of a civilization. That is the definition of a society where everyone is given a chance, treated equally and fairly, and is judged by the content of their character, not their different skin color or which version of ignorant superstitious nonsense their parents lied about as children. Racists around the world said the same things about the Irish and Jews and Poles (like your partner) and...every other immigrant movement over the centuries. What's your family's heritage, by the way? Were your ancestors lied about with racist fearmongering crapola by self-entitled locals the same way as you are now? If someone like that said the same things about all people from Poland, like your partner, would they be right? Or would you want them to judge your partner based on who they actually were, not where they just happened to come from?
    • Again, this is an irrelevant attempt to attack the messenger. The truth does not require any justification.
    • Removed the blue and underline as you did not post a link. This would also  be considered spamming.
    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!