Recommended Posts

So, my Son (Just over a year) decided to grab a tea from his sisters hand and during their fight for control of the tea, some splashed out onto my laptop.

Right away it shut off, and the power light started to flash. All the power-up lights would flash then turn off, then a couple seconds later would turn back on. As it is now, it is still doing the same thing, and it's only for like a second they turn on. There is no beeps or display changes. And sits in the loop of lights flash for a second, then stop then start.

My thoughts are it's either the PSU or the MOBO.

What I know:

Power button works (so lead to Mobo is fine)

Lights work, so Mobo has power to send to lights/leads

Fan does not always spin when lights flash on (however 1/10 times it does)

What I have tried:

Remove the HDD's -> Same result

Remove A Stick of RAM -> Same Result

Removed the CMOS Battery -> Same Results

I've opened up the entire back to ensure no Tea left

I've removed the keyboard and exposed the MOBO I see no shorts/burn marks.

I've removed the top power bar panel and cleaned up a bit of tea

There was tea on the mobo (not much), I cleaned it up, there was tea near the fan/power button I cleaned it up. Currently I have it open with the keyboard and components removed to air it out (I have it covered to stop dust). If it does the same in the morning, I will contact HP however.. it's out of Warantee and I am hoping someone here might have some suggestions or ideas before I go and spend money to fix it.

I would rather pay to replace parts than buy a new one as it is a DV7 with dual 500gb hdds, Core i7 processor, geforce discreet card, 6gb ram. So it's a solid laptop and worth the money to fix if need be, but the less I have to spend.. the better obviously.

Link to comment
https://www.neowin.net/forum/topic/1087633-laptop-power-problem/
Share on other sites

Have you taken out the battery to make sure no tea has gotten between the contacts?

While it's apart, you should try clean the tea spots off with 100% isopropyl alcohol, it evaporates very very fast.

I have the battery out yes, all the tests were done both with the battery in and out, I had to remove it though to be able to open the laptop up. I will try the alcohol in the morning, a friend suggested hand sanitizer, would that be the same thing?

I have the battery out yes, all the tests were done both with the battery in and out, I had to remove it though to be able to open the laptop up. I will try the alcohol in the morning, a friend suggested hand sanitizer, would that be the same thing?

Personally, I wouldn't use hand sanitizer. It may have a high alcohol content, but being more solid than liquid, you'd have to apply very small amounts for it to evaporate in a short time. Also, I'm not sure what other things are added to hand sanitizer which may make it slightly conductive.

the only thing i can think of is open as much as you can up and let it air out. i've spilled coffee on my work notebook a few months back, flipped it upside down, coffee drained out, turned the notebook off, made sure there was nothing between the battery and the contact, turned it back on. it does have minor issues now, but is definitely working (very occasional freezing and leaving it untouched for over 20 mins disconnect networks).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • eh I'll wait for the June 2026 MVS ISO downloads which should be coming out next Tuesday June 16 and possibly contain build 8655 instead of 8653
    • read this recent topic in another forum: https://www.askwoody.com/forums/topic/still-on-win-10-and-happy-to-be-there/ some people are happy sticking with Win10
    • Cooler Master MasterFrame 600 PC case is now 33% off on Amazon by Ivan Jenic The Cooler Master MasterFrame 600 is currently $109.99 on Amazon, down from its original $164.99 list price. That's 33% off and $55 saved on this premium aluminum mid-tower case with a modular design. If you're upgrading your PC case and want something that doesn't force you into a rigid layout, the MasterFrame 600 is worth a look. The case is built around the Cooler Master's FreeForm 2.0 platform, which lets you reconfigure the internal structure according to your hardware. Magnetic side panels allow for straightforward adjustments, and the case supports everything from Mini-ITX to E-ATX motherboards without compromise. There's also generous cooling headroom. Four pre-installed PWM fans handle airflow out of the box. GPU clearance goes up to 410mm, and the case supports radiators up to 420mm with room for three simultaneously. Truth be told, this might not be the prettiest case on the market, but it’s highly functional. The aluminum construction keeps the whole thing lightweight despite its size, and the finish looks noticeably better than the plastic mid-towers competing at this price point. If you want a serious, flexible case that prioritizes function over flashy aesthetics like RGB lighting, the MasterFrame 600 delivers at a reasonable price. Cooler Master MasterFrame 600 - $109.99 | 33% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • DK, I don't use the extended channel, I'm always on the latest release.
  • Recent Achievements

    • Rookie
      restore went up a rank
      Rookie
    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      ATLien_0
      82
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!