Western Digital launches new Red branded Hard Disks


Recommended Posts

ttnVm.png

Western Digital has announced a new series of Hard Disks which join its current range of Green, Blue and Black Hard Disks. The new Red series are designed for Network Attached Storage appliances, Small Business Servers and Home Servers.

The new drives take the same energy considerations of the green series and combine that with enterprise level anti-vibration technology and time-limited error recovery (TLER) of the Black series.

These features make it the perfect citizen in any small to medium sized storage configuration. The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

The new Red series will arrive in three configurations, 1TB ($109), 2TB ($139) and 3TB ($189). All three disks feature 64MB of Cache and SATA 6Gb/s Interfaces.

Perhaps the most impressive part of these disks is their power consumption. All three drives are rated at no more than 4.6Watts during Read/Write operations and 0.6-Watt power consumption when in standby or sleep mode.

Read more @ Western Digital's Red Page

Original News Piece written by Vice

  • Like 1

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Thanks for posting that review & me too! - I think I'll probably end up buying a few of the 3TB models for my server.

Can someone explain to me what the difference would be in using this drive for a RAID arrange and using a "normal" 1TB oem drive?

If you read the article I wrote at the top it clearly explains that lol

To quote myself:

The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

Normal drives such as the Eco Green series by Western Digital do not support TLER and are not recommended for RAID use.

A "normal" drive can be many things, ranging from very suspect (Acer) to something quite solid (samsung).

This HDD, over a standard drive, will be more power efficient, more resistant to vibrations, and offer TLER (great, if you are actually running a raid... a non-issue otherwise). I think performance will be much of the same...but who really needs 100+ MBps from a network drive?

For an 'always on' solution, I think they're great - the good points of the Green AND improved life/durability! I wouldn't say go out and swap all your storage drives for these...but there is no reason to buy anything instead of these.

EDIT: If a raid gets stuck waiting on a member disk, it could all fall appart - but who really runs RAID-0 for a storage solution? If a member disk goes offline in any proper storage raid (1, 5, etc) then you reset the computer and it'll come back online if its jammed on a request)

yeah I got that from the OP :p but what would be the result in not using a disk with TLER? crash and burn?

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Interesting! Thanks

I'm asking because in the next couple of months i'm thinking of upgrading my 6 yeard old build and was thinking of more reliable solutions than just plugging in an external hard drive for back up and I don't know much about RAID and what types of HDD's to use and whatnot, anyhow, thanks :)

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

naw I barely have around 300gb or more of photos and music, the thing is, I've already had an external WD fail, I sent it back for RMA ( still under warranty) Luckily I had the in computer back up, but it was that disk failure that got me thinkin, i've got 10+ years of photos in my PC that are worth saving and not losing. Yeah I keep reading RAID is too much of a hassle for backup, I really don't care about performance but, just being safe, anyho, no more thread hijacking :p

So I guess with the launching of new products ... factories in Asia must be caught up with production and now they can lower prices .... :crazy:

BLASPHEMY!!!

NEVER! :o

Glassed Silver:mac

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

[...]

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

Probably it's got to do with higher data density = less rpm needed for the same speed.

Glassed Silver:mac

Haha damn! I just got 2 Greens -.- Then again, being in Australia, we probably wont be able to get our mits on these for a few years yet =P

They're already available at a lot of Aussie computer stores - PCCaseGear and CentreCom just to name a couple ;)

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

Indeed, I was lucky enough to get four green drives before this policy was implemented, one failed, got a replacement under warranty but it wouldn't allow me to change the TLER :(

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Meh. You don't need TLER/RED/BLACK/ENTERPRISE drives for a home server. I'm using 8 Samsung HD204UI 2TB drives with a dell PERC 6/I controller in a case at home. The box has been going for over a year and a half 24x7, only going down for windows updates, or cleaning dust out. I have not had one single problem with any of the drives yet. These are commercial "Green" samsung 5400 RPM drives, and I got them for 69$ each. RAID5 reads/Writes 500MB/sec +, 0 errors, serving as a Web/Exchange/Hyper-V/fileserver/torrent box

This is overkill.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!