Western Digital launches new Red branded Hard Disks


Recommended Posts

ttnVm.png

Western Digital has announced a new series of Hard Disks which join its current range of Green, Blue and Black Hard Disks. The new Red series are designed for Network Attached Storage appliances, Small Business Servers and Home Servers.

The new drives take the same energy considerations of the green series and combine that with enterprise level anti-vibration technology and time-limited error recovery (TLER) of the Black series.

These features make it the perfect citizen in any small to medium sized storage configuration. The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

The new Red series will arrive in three configurations, 1TB ($109), 2TB ($139) and 3TB ($189). All three disks feature 64MB of Cache and SATA 6Gb/s Interfaces.

Perhaps the most impressive part of these disks is their power consumption. All three drives are rated at no more than 4.6Watts during Read/Write operations and 0.6-Watt power consumption when in standby or sleep mode.

Read more @ Western Digital's Red Page

Original News Piece written by Vice

  • Like 1

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Thanks for posting that review & me too! - I think I'll probably end up buying a few of the 3TB models for my server.

Can someone explain to me what the difference would be in using this drive for a RAID arrange and using a "normal" 1TB oem drive?

If you read the article I wrote at the top it clearly explains that lol

To quote myself:

The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

Normal drives such as the Eco Green series by Western Digital do not support TLER and are not recommended for RAID use.

A "normal" drive can be many things, ranging from very suspect (Acer) to something quite solid (samsung).

This HDD, over a standard drive, will be more power efficient, more resistant to vibrations, and offer TLER (great, if you are actually running a raid... a non-issue otherwise). I think performance will be much of the same...but who really needs 100+ MBps from a network drive?

For an 'always on' solution, I think they're great - the good points of the Green AND improved life/durability! I wouldn't say go out and swap all your storage drives for these...but there is no reason to buy anything instead of these.

EDIT: If a raid gets stuck waiting on a member disk, it could all fall appart - but who really runs RAID-0 for a storage solution? If a member disk goes offline in any proper storage raid (1, 5, etc) then you reset the computer and it'll come back online if its jammed on a request)

yeah I got that from the OP :p but what would be the result in not using a disk with TLER? crash and burn?

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Interesting! Thanks

I'm asking because in the next couple of months i'm thinking of upgrading my 6 yeard old build and was thinking of more reliable solutions than just plugging in an external hard drive for back up and I don't know much about RAID and what types of HDD's to use and whatnot, anyhow, thanks :)

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

naw I barely have around 300gb or more of photos and music, the thing is, I've already had an external WD fail, I sent it back for RMA ( still under warranty) Luckily I had the in computer back up, but it was that disk failure that got me thinkin, i've got 10+ years of photos in my PC that are worth saving and not losing. Yeah I keep reading RAID is too much of a hassle for backup, I really don't care about performance but, just being safe, anyho, no more thread hijacking :p

So I guess with the launching of new products ... factories in Asia must be caught up with production and now they can lower prices .... :crazy:

BLASPHEMY!!!

NEVER! :o

Glassed Silver:mac

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

[...]

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

Probably it's got to do with higher data density = less rpm needed for the same speed.

Glassed Silver:mac

Haha damn! I just got 2 Greens -.- Then again, being in Australia, we probably wont be able to get our mits on these for a few years yet =P

They're already available at a lot of Aussie computer stores - PCCaseGear and CentreCom just to name a couple ;)

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

Indeed, I was lucky enough to get four green drives before this policy was implemented, one failed, got a replacement under warranty but it wouldn't allow me to change the TLER :(

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Meh. You don't need TLER/RED/BLACK/ENTERPRISE drives for a home server. I'm using 8 Samsung HD204UI 2TB drives with a dell PERC 6/I controller in a case at home. The box has been going for over a year and a half 24x7, only going down for windows updates, or cleaning dust out. I have not had one single problem with any of the drives yet. These are commercial "Green" samsung 5400 RPM drives, and I got them for 69$ each. RAID5 reads/Writes 500MB/sec +, 0 errors, serving as a Web/Exchange/Hyper-V/fileserver/torrent box

This is overkill.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!