Recommended Posts

So based on these two threads:

http://www.neowin.ne...-your-body-art/

http://www.neowin.ne...e-with-tattoos/

I myself have never considered getting a tattoo, because of the faux idea that you couldn't donate blood EVER you got tattooed. Fast forward a couple of readings later I learned it's just for the first year in some cases.

My main beef is with the precedence of the ink. Seeing I live in third world country Honduras, there aren't many "established" and health inspected tattoo parlors. Also, I read they use disposable needles now, I doubt they do that here ( though to be honest, I haven't done that much research on how it gets done here).

Anyho... My questions are:

How can I make sure the ink is high quality?

Health concerns with the tattoo artist and equipment?

And perhaps you can post your experiences if anything went wrong, what went wrong etc. ?

I've googled tattoo health issues, but getting real feedback is a lot nicer :)

P.S. I'm thinking of getting one in my lower wrist (matching with her.. ) and shoulder/ high arm.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/
Share on other sites

With the pigment there is no real way for you to tell what quality you're getting other than to see a bottle. Brand names won't really mean anything to you, but you could call ahead and ask which brand they use. Kuro Sumi, Eternal, Fuzion, Intenze would all be available (read: shipped to) in Honduras I would suspect.

If they're not using disposible tubes/needles you could ask to see their autoclave to make sure they really have one.

You are entitled to ask these questions, though I think most people here don't think about it.

You could try and find info on the health department and ask them which shops they do regular inspections on.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595053987
Share on other sites

Hi Draconian Guppy.

A professional tattooist should always show you his process. He should always open apart a new needle in front of you and show you that all their equipment has been disinfected either by a vapor box or by disinfectant liquid.

About your health concerns, most of the time is because the user did not take care of his tattoo. Avoid direct sunlight, always keep clean the tattooed area but use only neutral soap. You should keep the tattoo moisturized, I recommend you to use any lotion that has UREA in it. A very thin layer of vaseline should help too.

Power tip: NEVER, EVER, GET MATCHED TATTOOS!! :p

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054045
Share on other sites

With the pigment there is no real way for you to tell what quality you're getting other than to see a bottle. Brand names won't really mean anything to you, but you could call ahead and ask which brand they use. Kuro Sumi, Eternal, Fuzion, Intenze would all be available (read: shipped to) in Honduras I would suspect.

If they're not using disposible tubes/needles you could ask to see their autoclave to make sure they really have one.

You are entitled to ask these questions, though I think most people here don't think about it.

You could try and find info on the health department and ask them which shops they do regular inspections on.

I don't really think the health department even checks those shops, alls they need is a business permit.

What I think i'll do is ask around the most "known" ones, check out the process and post back here...

Hi Draconian Guppy.

A professional tattooist should always show you his process. He should always open apart a new needle in front of you and show you that all their equipment has been disinfected either by a vapor box or by disinfectant liquid.

About your health concerns, most of the time is because the user did not take care of his tattoo. Avoid direct sunlight, always keep clean the tattooed area but use only neutral soap. You should keep the tattoo moisturized, I recommend you to use any lotion that has UREA in it. A very thin layer of vaseline should help too.

Power tip: NEVER, EVER, GET MATCHED TATTOOS!! :p

Use neutral soap always? Or just when it got done? Because if I have to do that permanently then hell no :p

The thing is, most shops here I don't really think could be called "Professional" they're more like serious amateurs ( or so I think).

On the matching tats, we've been together for around 12 years and 5 months, so... Yeah although you never know :wacko: I'm thinking of making something generic a la "his and hers" sorta a half lotus, half skull, some random quote, black rose in mine, red in hers, etc. Not her name or something that specific, justincase...

On the process: Is getting colored that much of a hassle? (These questions I will ask to the place I get it, but the more you know).

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054101
Share on other sites

Use neutral soap always? Or just when it got done? Because if I have to do that permanently then hell no :p

The thing is, most shops here I don't really think could be called "Professional" they're more like serious amateurs ( or so I think).

On the matching tats, we've been together for around 12 years and 5 months, so... Yeah although you never know :wacko: I'm thinking of making something generic a la "his and hers" sorta a half lotus, half skull, some random quote, black rose in mine, red in hers, etc. Not her name or something that specific, justincase...

On the process: Is getting colored that much of a hassle? (These questions I will ask to the place I get it, but the more you know).

Not always, just use neutral soap until its healed.

Does not matter if they are serious amateurs, just ask them to show you their procedure (new needles, latex gloves, everything sterilized) and you're good to go.

Getting colored is not a hassle at all, it just take more time. Be careful with red and yellow inks since these can cause allergic reactions.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054119
Share on other sites

Not always, just use neutral soap until its healed.

Does not matter if they are serious amateurs, just ask them to show you their procedure (new needles, latex gloves, everything sterilized) and you're good to go.

Getting colored is not a hassle at all, it just take more time. Be careful with red and yellow inks since these can cause allergic reactions.

That's the sort of stuff i'm looking for. If the guy/people I go to are any good, they should know/tell me all this, hopefully?

On the areas, i'm guessing any body part that skin doesn't stretch easily is best?

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054135
Share on other sites

On the areas, i'm guessing any body part that skin doesn't stretch easily is best?

Correct, it's easier to get those areas done in the first try. Areas like the elbows or the knuckles are more problematic (I've retouched my knuckle tats at least five times). Consider that you move heavily your wrist over the day.

Just a tip for future reference. The closer the skin is to the bone the more painful the tat will be.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054159
Share on other sites

Correct, it's easier to get those areas done in the first try. Areas like the elbows or the knuckles are more problematic (I've retouched my knuckle tats at least five times). Consider that you move heavily your wrist over the day. Just a tip for future reference. The closer the skin is to the bone the more painful the tat will be.

Why have you had to retouch them? Ink fades? stretches? What do you mean by the wrist movement? It will hurt more or will it make keeping the design that before it completely heals?

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054175
Share on other sites

Why have you had to retouch them? Ink fades? stretches? What do you mean by the wrist movement? It will hurt more or will it make keeping the design that before it completely heals?

Stretches. Fingers are very problematic because is the skin that you stretch and deform the most during the day.

The wrist is similar. Tattoos made in the middle of your wrist get stretched a lot since we move our hands heavily during the day, be careful. It will not hurt more, but because the stretching it has a chance that some of the ink will get purged with the scabs.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054189
Share on other sites

Hmmm well the issue is... I thought of the wrist, because my other half is a dr specializing in surgery, I really don't give a rats ass if having a tattoo will make people ( read as:future employers) think anything of me, but she on the other hand, does.

A lot of good tips, thanks sanctificado sea tu nombre and rev23dev!

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054207
Share on other sites

Anything tattooed close to bone will hurt you. (wrist, ankle, chest, ribs, fingers, foot)

The ink lasts depending on the artists skill and your skin. If he barely scratches the surface, black will be green soon. I have a 2 year tat and it's still black.

Without a good artist, DON'T get colored tattoos, they will look bad.

If your skin is brown/dark, don't get colored stuff either, unless it's some epic artist doing it.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054255
Share on other sites

One of the easiest ways of telling how good or bad a shop is, as soon as you walk in, does it smell like a hospital or does it smell like a bar? All good shops will smell Hospitalish as they are constantly cleaning and disinfecting all their equipment and any furniture the customer uses, not just the tattoo gun. Hell I got a tattoo done at the artist's home, his work room smelled and was cleaner than the rest of the house, and he would not allow his kid into that room due to the chance at infections, that's the sign of a good shop

Like SiCKX said, I have darker skin, of my 5 tattoos only one is colored, the colors are fading, all my black tattoos, including my first one that's around 20 years old is still solid black, no fading or discoloration, all the way to the last one I got almost 16 years ago

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054349
Share on other sites

Anything tattooed close to bone will hurt you. (wrist, ankle, chest, ribs, fingers, foot)

The ink lasts depending on the artists skill and your skin. If he barely scratches the surface, black will be green soon. I have a 2 year tat and it's still black.

Without a good artist, DON'T get colored tattoos, they will look bad.

If your skin is brown/dark, don't get colored stuff either, unless it's some epic artist doing it.

How do I know if the artist is good :s ?

You could do worse than contacting this guy...

http://www.sacredink...out_martin.html

As he has been to Honduras, he may be able to give you some recommendations.

whoa! how did you even... Thanks!

One of the easiest ways of telling how good or bad a shop is, as soon as you walk in, does it smell like a hospital or does it smell like a bar? All good shops will smell Hospitalish as they are constantly cleaning and disinfecting all their equipment and any furniture the customer uses, not just the tattoo gun. Hell I got a tattoo done at the artist's home, his work room smelled and was cleaner than the rest of the house, and he would not allow his kid into that room due to the chance at infections, that's the sign of a good shop

Like SiCKX said, I have darker skin, of my 5 tattoos only one is colored, the colors are fading, all my black tattoos, including my first one that's around 20 years old is still solid black, no fading or discoloration, all the way to the last one I got almost 16 years ago

Hmmm good tip on the smell!

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595054615
Share on other sites

"The ink lasts depending on the artists skill and your skin. If he barely scratches the surface, black will be green soon."

No. Just...no.

Wrong ink will turn green, right kind of an ink just fades over time, I did my first 7 years back, it's fading a little bit but if done with right ink it won't turn green (maybe in 30-40 years but in that time you should have re-done it anyway)

Where do you people get that nonsense that black ink turns to green? Either find yourself a new "shop" or tell em' to use right ink.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595065103
Share on other sites

"The ink lasts depending on the artists skill and your skin. If he barely scratches the surface, black will be green soon." No. Just...no. Wrong ink will turn green, right kind of an ink just fades over time, I did my first 7 years back, it's fading a little bit but if done with right ink it won't turn green (maybe in 30-40 years but in that time you should have re-done it anyway) Where do you people get that nonsense that black ink turns to green? Either find yourself a new "shop" or tell em' to use right ink.

Which is why i'm asking !!! :/

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595065119
Share on other sites

I'm going to check out another one in a couple of days anyway, I can ask which ink they are using but as some said already it also depends on the artists not just the ink.

:wacko: huh?

anyway I just want feedback on the place I found, based on their uploaded photos!

Found a place called "hunah ku tattoo studio" there facebook is:

www.facebook.com/HunabKuTattoo

Could you fellows check them out and give me your opinion on their stuff? They've got tons of images uploaded.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595065159
Share on other sites

Draconian, those guys you linked seem to know what they're doing. If you check their Scars photo album you can take a look at their health measures. Everything seems legit.

Yeah, I just looked too. The guy is bagging his tattoo machine which some artists even in the US don't do. I think you'd be ok there.

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595066495
Share on other sites

Draconian, those guys you linked seem to know what they're doing. If you check their Scars photo album you can take a look at their health measures. Everything seems legit.

Yeah, I just looked too. The guy is bagging his tattoo machine which some artists even in the US don't do. I think you'd be ok there.

Yup, I actually went to the shop and saw someone getting tattooed whilst I was there, which is how I got the facebook profile. You can never be too safe though :p ( Call me paranoid, but hey...).

Now all I have to do is finish my design and book an appointment for saturday!

Thanks again all! Tattoo FAQs at a tech forum :p

  • Like 2
Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595066561
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Follow up

Posting pics now at

https://www.neowin.net/forum/topic/1073233-official-show-off-your-body-art/page__st__45

And

https://www.neowin.net/forum/topic/1048473-neowin-digital-gallery-yearly-edition-2012/page__st__225

Damn the "fill" Part hurts... My SO got it near the ribs, which supposedly hurts twice as more than the arm and when I was holding her hand, well... I could tell it hurt more than mine! We definitely want to get more ink now!

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-595143069
Share on other sites

  • 7 years later...

Ok lol so I know this thread is over 7 years old, but I just want to clear up a few things for people that may stumble across this thread like I did.

 

Petroleum jelly should NEVER be put on a tattoo other than it being a lubricant to help the needle penetrate the skin during the tattooing process. It doesn’t moisturise the skin what so ever, and it won’t let it breathe in order to heal properly.

 

Needles should never, EVER be re-used, and the industry standard now is generally to only use disposable grips, as autoclaves just aren’t sufficient in terms of getting everything out. When the skin is tattooed it will produce a fine mist of blood, plasma, ink, etc, that gets inside the tube and it’s just an unnecessary risk. As for needles I can’t even imagine how it would be even possible to effectively decontaminate a tight needle grouping, as well as the fact that the needles will get blunter. They should be opened new out of a sterile packet EVERY time, and the client should witness it happen.

 

As for tattoos turning green, it has absolutely nothing to do with the depth what so ever. The reason tattoos used to fade to green was due to using older Indian inks. Newer inks have more of a blue base, so rather than fading to green they’ll fade to a very dark navy after many many years, but they generally stay blacker for longer. Newer inks should never fade to green. 

 

Also, in terms of fading, it isn’t being on a ‘stretchy’ piece of skin that will make it fade. The stretching isn’t what fades it. The reason some areas fade more than others is because some areas get a lot more wear. Elbows and knees for example, get a lot more wear and tear on the skin than other parts of your arms and legs. Ankle tattoos can fade faster due to rubbing on shoes every day. Finger tattoos often fade because your fingers are constantly being used, rubbed against things, washed, and generally the skin goes through a lot more wear than other places. Has nothing to do with how stretchy the area is. 

 

I hope I don’t sound like an ass or anything, just wanted to get the information out there! I hope your tattoo is holding up well :) 

Link to comment
https://www.neowin.net/forum/topic/1095571-faq-tattoos/#findComment-598496363
Share on other sites

This topic is now closed to further replies.
  • Posts

    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
    • The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it
    • Welcome to Neowin! Enjoy your stay!
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      PsYcHoKiLLa
      272
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!