Delay in Remote Desktop Connection. What are possible solutions?


Recommended Posts

I am experiencing delays and reconnecting issues when connecting to RDP. Both wired and wireless.

I have purchased a new router - Linksys EA3500 - and still these issues occur.

Ping tests stated around 18ms for my connection.

My internet speeds/subscription are 120 MB down, 10 MB up. I have tested with different "Experience / Performance" settings within RDP, from low-speed broadband to high-speed broadband; all without success.

I have KIS2013 installed with default settings on both computers (wired and wireless).

What can be the issues for these delays/secs of 'hickups' during the RDP-connection?

RDP connections to where? Some box on the internet, or between boxes on your own network - wired to wireless, wireless to wireless, wired to wired?

Also what do you consider delay, 2 seconds, 5 seconds, 10, 20, 3 minutes?

RDP to some box (server) on the internet - our server 80 km away.

The server is wired to its backbone/Internet, I make a RDP-connection via my computer (wired) or notebook (wireless) from home (or elsewhere) - I use its name/alias and not the IP.

The delay is a couple of seconds (mostly 2-5 sec); screen 'freezes', reconnecting popups appears, connection is back again and I can start working again...

And this once every 2-5 minutes.

EDIT:

adjusted delay time to real circumstances

well there could always be a slight delay in resolving to its FQDN, I think that is what you meant by name/alias because those are not resolvable on the internet but a fully qualified domain name is ;) something.something.tld

so you its not really a delay in connection, but a loss of connection and reconnect

"this once every 2-5 minutes."

Are you connecting via a VPN to this server, or just the normal RDP 3389 just over the internet? Is there any firewall on the other end limiting connections to this port to only where your coming from?

You put 3389 open on the public internet and its going to get hit quite often with people attempting to log in.

If your saying it happens every few minutes I would look at logs on server side for any hints, and also would sniff the traffic from your connection. This will show you if your getting a lot of retransmission on lost packets, etc.

lagging could be upstream not fast enough to handle request, could be dns not fast enough to handle name resolution...you mention your upstream, is your upstream the upstream at home or your upstream at the office. The upstream at the office needs to be ~1Mb/s for optimal response...your down stream at home needs to be at least that. Also the dns plays quite a bit into speed, try connecting to the ip to negate dns being an issue. if it is fast connecting to the outside ip, then the issue is dns related.

it's kinda strange... when I use my cell phone with tethering (wayyy slower connection, everything is ok) on the same notebook, I have a good connection and no delay/lag.

It seems that either my modem or router is the "bad kid in town".

I just got a new router today - default settings - so that should not be the issue.

I might just check a direct cable connection from my modem to my computer (thus cancelling out the router) and see what happens...

I'll come back to this latter thing.

@ +Chris13NT, how can I prevent this? Or is this ISP-related?

Just tested it "quick and dirty" and the delay/lag is not present when connecting directly to the modem.

When I put my router in between the lag is there yet again.

There is a power/surge adapter to prevent over-voltage, but this hasn't been an issue ever since.

Might it be cable related? And that one of the UTP-cables has been damaged/is broken?

Replacing might help, but that I need to get myself some new cables....

By the way, the current cable-setup is:

ISP-entrance in my home - cable to modem, provided bij ISP - modem - cable to surge-adapter - cable to router, from there the standard 4 GBit ports of this EA3500 to computer and other periphicals + router wireless to notebook and other periphicals.

What is your dns configuration when connection directly to the modem?

start, run, cmd

ipconfig/all

What is your dns configuration when connected to the router?

start, run, cmp

ipconfig/all

change the dns on your adapter to the dns that you are getting when you are on the modem. does the same problem exist?

dns could be the problem on initial delay, or just failure to resolve - but once the connection is established and having freezes every few minutes does not seem like a dns related problem to me.

What kind of router is it? Some routers have trouble with connections over 50mbit, I had a Linksys E3000 and it couldn't cope with my 85mbit FiOS line, it would crap out every time I pegged the download.

It could be cable related but I doubt it.

I have a brand new Linksys EA3500. It should get "Transfer rates up to 300 + 450 Mbps".

The DNS I get when connect to the router is 1 IP: 192.168.1.1

When directly connected to the modem DNS server is 2 IP's: 213.48. .... and 62.179. ...

yeah those are from your ISP when connected to modem, and when connected to router your using it as your dns forwarder. This is a common setup, your router would then forward dns to those handed to your router via your ISP 213.48 and 62.179

But again if your having the issues once your connected, it seems highly unlikely that it would be dns related.

yeah those are from your ISP when connected to modem, and when connected to router your using it as your dns forwarder. This is a common setup, your router would then forward dns to those handed to your router via your ISP 213.48 and 62.179

But again if your having the issues once your connected, it seems highly unlikely that it would be dns related.

Thx. So what can it be?

unlikely sure, test it, verify it, make sure. be sure, not be somewhat sure....perhaps the router is being retarded when forwarding, it is a link in the chain....remove the link.

I thought it was initial connection....if it is not initial connection, then it is not dns related. something is happening with the traffic when it goes from router to modem.

Can you to a trace route to the IP of the RDC server? This might give a clue if you have a hop with unusually high ping.

do tracert <ip (or dns name)> in cmd

The fact that the lag only happens when the router is in the link is making me almost positive it's the router botching things.

Can you to a trace route to the IP of the RDC server? This might give a clue if you have a hop with unusually high ping.

do tracert <ip (or dns name)> in cmd

In which setup and from where?

From my computer, connected via router, to the RDC server?

Or from the RDC server to my computer? (and also here via router or directly connected to modem?)

Off topic but in reply to Chris, my e2000 handles my 120mbit line with ease and it has a slower CPU than your e3000..

So something is up there..

It could have just been going bad, or it could have been DD-WRT's fault.

Can you to a trace route to the IP of the RDC server? This might give a clue if you have a hop with unusually high ping.

do tracert <ip (or dns name)> in cmd

The fact that the lag only happens when the router is in the link is making me almost positive it's the router botching things.

What kind of info do you need from this trace?

From which hop# there is a time out? or else?

There has been some less delays (but still annoying) with the new FW... although I had to wrestle myself through the Cisco Cloud Connect.

Still some delays.

Question remains....

EDIT:

I guess I was over-enthusiastic... delays still remain as strong as before :(

This topic is now closed to further replies.
  • Posts

    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • A bit premature... 100% Marketing. Bizarre.
    • A $300 price hike is insane! No one is going to want to pay that much!
    • Since the 1st one flopped, there is really no reason to make another one. It's just losing money left and right.
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!