Delay in Remote Desktop Connection. What are possible solutions?

By kiddingguy
in Smart Home, Network & Security

 Share

Recommended Posts

Grand Master

+BudMan MVC

Posted
  • MVC
Posted

Yeah looks like hop 7 is not very responsive - but since your not seeing longer pings after it, it would mean that its just slow in answering the icmp request.

Now if you were seeing long returns from the hops after, then where it jumps in speed would normally point you to where the problem is in the network.

If your saying you don't have the problem when connected to the modem, then that pretty much rules out a network issue and something with your router. Are you wired to router when having the problem or only wireless does the problem happen. Are there other devices connected to this router at the same time your testing.

I would wire to your router, and disconnect every other client both wired and wireless other than you. If you don't have issues then, then do same test with you the only one on the wireless connection. If still not a problem then points to something else on your network causing the router to have problems. Are you doing any sort of p2p through this router? Anything that would be doing heavy upload/download while your connecting, or creating lots and lots of connections like p2p.

Grand Master

kiddingguy

Posted
  • Author
Posted

I have decent timings now arounf hob 7... 17 ms.

It turns out is't the UTP goinf to my WD Live TV.

This thing had issues when connecting and finding my network.

I guess I know the reason why.....

Unplugged the cable and now I have fast(er) internet...

EDIT:

Changed the UTP cable from router to WD device and now I have 17 ms around hob 7.

So I think the previous UTP cable is broken. Can this be an option?

Grand Master

kiddingguy

Posted
  • Author
Posted

Yes, RDC is active. So far no delay... luckily.

It turns out that some cable swaps - I haven't changed te UTP cables/bought new ons - to different GBit ports on the router.

Tomorrow is more a testing day in real life - also with my notebook.

I post my findings in this thread tomorrow.

I guess the testing and your suggestions did work in the troubleshooting. Thx for that... so far.

  • 2 weeks later...
Neowinian

babat

Posted
Posted

Delay and hiccups occur in RDP due to various reasons such as insufficient bandwidth, server down, firewall issues etc. What you can do is, try using various remote support services such as logmeinrescue.com, gosuportnow.com etc and check whether your remote connection works flawlessly or no.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component

      By hellowalkman · Posted

      Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The quantum search for Time's origin had an equally mind-boggling conclusion

      By cleverclogs · Posted

      The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20

      By Copernic · Posted

      VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is how much iPhone 18 Pro could cost after Apple's price hike confirmed

      By +Nik Louch · Posted

      They will
    • Politically funny images of the World

      By +Nik Louch · Posted

      Too soon, I'm still not over this death!

  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!