• 0

[VB.NET] In class we made a simple tictactoe program but how do you use tcp


Question

In class we made a simple tictactoe game in vb.net but I wanna try to go the extra mile and make it playable over the network.... I know alot about tcp/ip like I would need to pick one of the computers to host it with a port a number then one of the programs need to be the client and connect to that server.... I remember teaching myself on how to make a simple chat program in vb6 using the winsock ocx but how would I do it in vb.net?

Recommended Posts

  • 0
http://msdn.microsoft.com/en-us/library/system.net.sockets.tcplistener.aspx#Y0 so how do I use this code? Where do I put it all? I obviously dont put it all in a command button....
  • 0

No, you could start your TcpListener on the OnLoad() method of the main form. That said, if you're just starting out programming, adding TCP/IP multiplayer to your Tic-Tac-Toe is probably beyond your abilities at the moment. You'll need to define a message format, serialize/deserialize your messages through the connection, ensure synchronisation of all clients, handle disconnects and re-connects gracefully etc. It's not trivial.

  • 0
  On 26/10/2012 at 23:04, Dr_Asik said:

No, you could start your TcpListener on the OnLoad() method of the main form. That said, if you're just starting out programming, adding TCP/IP multiplayer to your Tic-Tac-Toe is probably beyond your abilities at the moment. You'll need to define a message format, serialize/deserialize your messages through the connection, ensure synchronisation of all clients, handle disconnects and re-connects gracefully etc. It's not trivial.

copy and paste it onload and it dont work and the message part is easy just alot of ifs "if client sends "X:1"" Put an x mark on button 1 so on.....

  • 0
  On 27/10/2012 at 10:37, togermano said:

copy and paste it onload and it dont work and the message part is easy just alot of ifs "if client sends "X:1"" Put an x mark on button 1 so on.....

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

  • 0
  On 28/10/2012 at 01:28, Dr_Asik said:

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

The code errors when I try to run it..... I am not stupid when it comes to this stuff i have used winsock before i Know i need a client and a server I took a ccna class all about tcp/ip

  • 0
  On 29/10/2012 at 11:29, togermano said:

What isnt an error?

First off, move your "imports" lines above the Public Class Form1 - they need to stay first in the code document.

Then remove the class MyTcpListener, and the public shared main sub - they do not belong inside another Sub/Function/Method.

Next you will figure out that this code has an endless loop that will basicly lock up your program as soon as it starts (it will never stop "loading"). You need to either put this code in a separate thread or use the TcpListener asynchronously (spelling?)

Have a look at http://msdn.microsoft.com/en-us/library/vstudio/system.net.sockets.tcplistener.beginacceptsocket(v=vs.90).aspx#Y0 for examples

  • 0

Your code doesn't compile. It's not valid Visual Basic and Visual Studio should show you some error messages in its output and error windows when you attempt to start the program. These error messages can often tell you what the problems are and how to fix them.

- The Imports directives should go at the top of the file, not inside a class declaration

- Your MyTcpListener class is declared inside the Form1 class, which is illegal - move it after the "End Class" of Form1 or, better, to its own file

- You're declaring a Main() function inside MyTcpListener, but your project is probably a Windows Forms Application, which already has its own Main() function - a .NET program must have only one Main() function.

- The code that goes inside that Main() method should go in the OnLoad() method of the Form1 class, as I explained to you before

Do you even know what is a class, a module, a namespace, what do access modifiers do, how to override a virtual method, what are events, how to register/unregister to them, what's a Shared method vs non-Shared, what is the purpose of the Main() method, etc? Implementing multiplayer will require putting together several pieces which you seem to ignore the very nature of. It's not like you're going to copy-paste the correct code here and there and it's all magically going to work; even if it did, that wouldn't be very useful to you, would it? Start by properly learning Visual Basic and the .NET Base Class Library and then you'll be able to implement advanced functionality like this and understand what you're doing. Learn to walk before you run...

  • 0
  On 08/11/2012 at 22:13, togermano said:

thanks everyone and yes it is in an endless loop how do I put it in its own thread?

Put that code in its own method and pass the method as a delegate to a BackgroundWorker. There are many more options for threading in .NET but that's probably the simplest one here.
  • 0
  On 28/10/2012 at 01:28, Dr_Asik said:

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

Currently I got it working that when I write something in a telnet client and using IFs it will trigger a msgbox depending on what I wrote into the telnet client. You say ifs a terrible way to do it then what is a good way to do it?

  • 0

For instance, if your messages are text messages of the form "1,2" where 1 and 2 are the line and column to play at, you could put all your textboxes in a two-dimensional array, parse the message as two integers, and use these as indexes into the array to obtain the corresponding textbox. No need for any ifs, works with any board size.

  • 0

Thanks! I may try to do it the if way and then try it with your way after

I ran into another problem I can't access any of form1s command buttons from the tcp/ip thread I have tried using form1.label1.text = "connected!!" it doesnt error but it doesnt work either. I googled the problem but none of it was any help

http://stackoverflow.com/questions/5683724/problem-accessing-a-textbox-control-from-another-class-thread-in-vb-net

  • 0

You're not allowed to update the UI from any other thread than the UI thread. Use the Invoke (synchronous) or BeginInvoke (asynchronous) method of the main form to pass UI updates (as delegates) from a background thread.

  • 0
  On 10/11/2012 at 17:30, Dr_Asik said:

You're not allowed to update the UI from any other thread than the UI thread. Use the Invoke (synchronous) or BeginInvoke (asynchronous) method of the main form to pass UI updates (as delegates) from a background thread.

Is there a sample of that somewhere?

  • 0

Public Shared Sub ticserver()

server = Nothing

Try

CheckForIllegalCrossThreadCalls = False

' Set the TcpListener on port 13000.

Dim port As Int32 = 13000

Dim localAddr As IPAddress = IPAddress.Parse("127.0.0.1

server = New TcpListener(localAddr, port)

' Start listening for client requests.

server.Start()

' Buffer for reading data

Dim bytes(1024) As Byte

Dim data As String = Nothing

' Enter the listening loop. While True

Console.Write("Waitinga connection... ")

' Perform a blocking call to accept requests. ' You could also user server.AcceptSocket() here.

client = server.AcceptTcpClient()

Console.WriteLine("Connected!")

Form1.PictureBox1.Show()

Form1.Label1.Text = "A client has connected to you"

Form1.Label1.Show()

data = Nothing

' Get a stream object for reading and writing

stream = client.GetStream()

Dim i As Int32

' Loop to receive all the data sent by the client.

i = stream.Read(bytes, 0, bytes.Length)

While (i <> 0)

' Translate data bytes to a ASCII string.

data = System.Text.Encoding.ASCII.GetString(bytes, 0, i)

Console.WriteLine("Received: {0}", data)

' Process the data sent by the client.

data = data.ToUpper()

Dim msg As Byte() = System.Text.Encoding.ASCII.GetBytes(data)

' Send back a response.

stream.Write(msg, 0, msg.Length)

Console.WriteLine("Sent: {0}", data)

i = stream.Read(bytes, 0, bytes.Length)

End While

' Shutdown and end connection

' client.Close()

' Console.WriteLine("SocketException: {0}", e)

Finally

server.Stop()

End Try

Console.WriteLine(ControlChars.Cr + "Hit enter to continue....")

Console.Read()

End Sub 'MainEnd Class'MyTcpListener

according to this http://tech.xster.ne...eads-on-vb-net/ adding the code

Me.CheckForIllegalCrossThreadCalls = False

should make it work but it doesnt..... why does me. always error I remove it and the error is gone but still this code does nothing

"

Form1.PictureBox1.Show()

Form1.Label1.Text = "A client has connected to you"

Form1.Label1.Show()

data = Nothing"

  • 0
  On 10/11/2012 at 19:01, togermano said:

Is there a sample of that somewhere?

Of course, googling any of the terms I mentionned will return you hundreds of useful results.

Don't disable checking for illegal cross-thread calls. You're making an illegal cross-thread call, disabling checking won't make it any less illegal.

  • 0
  On 10/11/2012 at 20:05, togermano said:

I dont get any of the codes they all use me.whatever and that always causes an error

"Me" is a reference to the current object, for instance if your code is inside your main Form class (like most tutorials assume), then "Me" is a reference to the Form object, which has an Invoke and a BeginInvoke method. Since I suppose you segregated your background thread code to another class, you'll have to pass it a reference to the Form object in order to invoke any methods of the Form from it. Alternatively, you could simply bring that code back to the main Form class and you'd be able to use "Me" to reference to Form then.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • they should have just made the cans look like speaker drivers. these are kind of off putting
    • Sounds like a tool is needed to backup drivers from Win Update for older devices. Anyone got a rough idea besides doing a manual backup of driverstore?
    • Stylish Samsung Galaxy S25 Edge gets 20% discount sending it to lowest price by Paul Hill If you’re in the market for a powerful, stylish phone, then you may be interested in the Galaxy S25 Edge, which is now reduced to $969.99, down 20% from the $1,219.99 list price. This is the lowest price that the device has been at on Amazon. You can get the device at this price if you go for the Titanium Icyblue or Titanium Silver editions. These models are the top-end S25 Edge variants with 512GB of storage. While this Samsung device may be about as thick as a pencil, it’s constructed from titanium and uses Corning Gorilla Glass Ceramic 2 on the display. This should ensure durability, despite its thin design. The thickness of this phone is just 5.8mm, and it weighs 163g. Camera capabilities and AI enhancements The Galaxy S25 Edge's camera system is impressive. It has a 200MP main camera with optical image stabilization and a 2x optical quality zoom. This feature magnifies the image using optical mechanisms in the camera lens so that the zoomed image retains its original clarity, detail, and resolution of the scene. On the back, there is also a 12MP ultrawide camera with autofocus and on the front, there’s a 12MP camera. Like many phones coming out now, there are AI-powered camera features such as Night Video, Best Face for group shots, Portrait Selfie, and Gallery Search by description. Notably, there is no dedicated telephoto lens like in the S25+ and S25 Ultra. This is a tradeoff that the company decided to make to achieve its ultrathin design. Telephoto lenses are camera lenses that are designed to make distant objects appear closer and larger in your photos and videos. The absence of this telephoto lens may be a deal breaker for those looking to use this camera for professional shots; otherwise, it’s still very impressive, especially with that 200MP main camera. Performance, display, and integrated AI features The S25 Edge is powered by the Snapdragon 8 Elite chipset, specifically the 3-nanometer Qualcomm SM8750-AB. It has an octa-core CPU (2x4.47 GHz Oryon V Phoenix L + 6x3.53 GHz Oryon V2 Phoenix M) and an Adreno 830 GPU. This model's display is a 6.7-inch QHD+ Dynamic AMOLED 2X with a 120Hz adaptive refresh rate and high brightness. This device has plenty of other AI features too, outside of the camera, including Cross App Action, Audio Eraser for videos, Now Brief/Now Bar for personalized information, and of course, Google Gemini. With 12GB of RAM, the specs on this phone are really very good. It should be capable of doing most tasks you throw at it, including gaming. You may wonder if it will handle games well, given that the thin design means it could overheat. Samsung has already thought about this and included a reconfigured vapor chamber that helps to keep the phone cool. Battery life and charging speed: The main compromise Aside from the removal of the telephoto lens, this phone also has a drawback in terms of battery life. Its 3,900 mAh battery capacity means it’s smaller than many other devices, even compared to budget phones. Another disappointing aspect is the charging, where the wired charging speed is limited to 25W—that’s lower than what you find on very affordable Xiaomi POCO devices. This battery limitation might make this device a bad choice if you’re away from a charger for long periods. One affordable way to mitigate this downside is by carrying a portable charger, but still, it’s ironic that you buy a thin phone to be lighter and then end up carrying a brick-sized charger around with you. You could also just bring your charger and plug it into an outlet. Is the Galaxy S25 Edge the smart buy for you? If you’re someone who wants a sleek, lightweight phone that has a premium build and can easily slice through tasks you throw at it, then the Galaxy S25 Edge is very likely for you. It’s also great for anyone looking for a standout camera that doesn’t need a telephoto lens. However, if you need a device with all-day battery life because you’re going camping or to the middle of nowhere, then you could probably find a better fit with a longer battery life. If this device is for you, check out the links below. Samsung Galaxy S25 Edge (Titanium Icyblue): $969.99 (Amazon US) / MSRP $1,219.99 Samsung Galaxy S25 Edge (Titanium Silver): $969.99 (Amazon US) / MSRP $1,219.99 This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • I got too many apps I use actively. Theres been too often I completely blank on the name of the application and had to manually look through the list for it. Now I'm using Start11 and got my apps sorted in the Start menu by categories so that if I'm looking for Krita i can find it under "Art editors". If MS are going to change it, they should consider making automated categories. Seen some Linux distros do that. But if they do, theres probably gonna be a lot of wrongly categorized apps though, unfortunately.
  • Recent Achievements

    • First Post
      emptyother earned a badge
      First Post
    • Week One Done
      Crunchy6 earned a badge
      Week One Done
    • One Month Later
      KynanSEIT earned a badge
      One Month Later
    • One Month Later
      gowtham07 earned a badge
      One Month Later
    • Collaborator
      lethalman went up a rank
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      675
    2. 2
      ATLien_0
      276
    3. 3
      Michael Scrip
      218
    4. 4
      +FloatingFatMan
      166
    5. 5
      Steven P.
      161
  • Tell a friend

    Love Neowin? Tell a friend!