• 0

[VB.NET] In class we made a simple tictactoe program but how do you use tcp


Question

In class we made a simple tictactoe game in vb.net but I wanna try to go the extra mile and make it playable over the network.... I know alot about tcp/ip like I would need to pick one of the computers to host it with a port a number then one of the programs need to be the client and connect to that server.... I remember teaching myself on how to make a simple chat program in vb6 using the winsock ocx but how would I do it in vb.net?

Recommended Posts

  • 0
http://msdn.microsoft.com/en-us/library/system.net.sockets.tcplistener.aspx#Y0 so how do I use this code? Where do I put it all? I obviously dont put it all in a command button....
  • 0

No, you could start your TcpListener on the OnLoad() method of the main form. That said, if you're just starting out programming, adding TCP/IP multiplayer to your Tic-Tac-Toe is probably beyond your abilities at the moment. You'll need to define a message format, serialize/deserialize your messages through the connection, ensure synchronisation of all clients, handle disconnects and re-connects gracefully etc. It's not trivial.

  • 0
  On 26/10/2012 at 23:04, Dr_Asik said:

No, you could start your TcpListener on the OnLoad() method of the main form. That said, if you're just starting out programming, adding TCP/IP multiplayer to your Tic-Tac-Toe is probably beyond your abilities at the moment. You'll need to define a message format, serialize/deserialize your messages through the connection, ensure synchronisation of all clients, handle disconnects and re-connects gracefully etc. It's not trivial.

copy and paste it onload and it dont work and the message part is easy just alot of ifs "if client sends "X:1"" Put an x mark on button 1 so on.....

  • 0
  On 27/10/2012 at 10:37, togermano said:

copy and paste it onload and it dont work and the message part is easy just alot of ifs "if client sends "X:1"" Put an x mark on button 1 so on.....

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

  • 0
  On 28/10/2012 at 01:28, Dr_Asik said:

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

The code errors when I try to run it..... I am not stupid when it comes to this stuff i have used winsock before i Know i need a client and a server I took a ccna class all about tcp/ip

  • 0
  On 29/10/2012 at 11:29, togermano said:

What isnt an error?

First off, move your "imports" lines above the Public Class Form1 - they need to stay first in the code document.

Then remove the class MyTcpListener, and the public shared main sub - they do not belong inside another Sub/Function/Method.

Next you will figure out that this code has an endless loop that will basicly lock up your program as soon as it starts (it will never stop "loading"). You need to either put this code in a separate thread or use the TcpListener asynchronously (spelling?)

Have a look at http://msdn.microsoft.com/en-us/library/vstudio/system.net.sockets.tcplistener.beginacceptsocket(v=vs.90).aspx#Y0 for examples

  • 0

Your code doesn't compile. It's not valid Visual Basic and Visual Studio should show you some error messages in its output and error windows when you attempt to start the program. These error messages can often tell you what the problems are and how to fix them.

- The Imports directives should go at the top of the file, not inside a class declaration

- Your MyTcpListener class is declared inside the Form1 class, which is illegal - move it after the "End Class" of Form1 or, better, to its own file

- You're declaring a Main() function inside MyTcpListener, but your project is probably a Windows Forms Application, which already has its own Main() function - a .NET program must have only one Main() function.

- The code that goes inside that Main() method should go in the OnLoad() method of the Form1 class, as I explained to you before

Do you even know what is a class, a module, a namespace, what do access modifiers do, how to override a virtual method, what are events, how to register/unregister to them, what's a Shared method vs non-Shared, what is the purpose of the Main() method, etc? Implementing multiplayer will require putting together several pieces which you seem to ignore the very nature of. It's not like you're going to copy-paste the correct code here and there and it's all magically going to work; even if it did, that wouldn't be very useful to you, would it? Start by properly learning Visual Basic and the .NET Base Class Library and then you'll be able to implement advanced functionality like this and understand what you're doing. Learn to walk before you run...

  • 0
  On 08/11/2012 at 22:13, togermano said:

thanks everyone and yes it is in an endless loop how do I put it in its own thread?

Put that code in its own method and pass the method as a delegate to a BackgroundWorker. There are many more options for threading in .NET but that's probably the simplest one here.
  • 0
  On 28/10/2012 at 01:28, Dr_Asik said:

How does it not work? What do you expect it to do? Do you have a client as well? A listener is just that, a listener, it listens to incoming connections. You need one instance of your app that acts as the server and one (or multiple others) that act as the client. There's a link to an example TcpClient in that same tutorial page for TcpListener. Read up on tcp connections, how to establish a connection, how to pass messages around, how to close the connection.

"A lot of ifs" is a terrible way of going about this btw. What would you do for a 10x10 tic-tac-toe? Code 100 if-elses? What if you wanted to support multiple different sizes? If you don't know about lists and loops I don't think there's any way you're going to add multiplayer functionality. Start one step at a time.

Currently I got it working that when I write something in a telnet client and using IFs it will trigger a msgbox depending on what I wrote into the telnet client. You say ifs a terrible way to do it then what is a good way to do it?

  • 0

For instance, if your messages are text messages of the form "1,2" where 1 and 2 are the line and column to play at, you could put all your textboxes in a two-dimensional array, parse the message as two integers, and use these as indexes into the array to obtain the corresponding textbox. No need for any ifs, works with any board size.

  • 0

Thanks! I may try to do it the if way and then try it with your way after

I ran into another problem I can't access any of form1s command buttons from the tcp/ip thread I have tried using form1.label1.text = "connected!!" it doesnt error but it doesnt work either. I googled the problem but none of it was any help

http://stackoverflow.com/questions/5683724/problem-accessing-a-textbox-control-from-another-class-thread-in-vb-net

  • 0

You're not allowed to update the UI from any other thread than the UI thread. Use the Invoke (synchronous) or BeginInvoke (asynchronous) method of the main form to pass UI updates (as delegates) from a background thread.

  • 0
  On 10/11/2012 at 17:30, Dr_Asik said:

You're not allowed to update the UI from any other thread than the UI thread. Use the Invoke (synchronous) or BeginInvoke (asynchronous) method of the main form to pass UI updates (as delegates) from a background thread.

Is there a sample of that somewhere?

  • 0

Public Shared Sub ticserver()

server = Nothing

Try

CheckForIllegalCrossThreadCalls = False

' Set the TcpListener on port 13000.

Dim port As Int32 = 13000

Dim localAddr As IPAddress = IPAddress.Parse("127.0.0.1

server = New TcpListener(localAddr, port)

' Start listening for client requests.

server.Start()

' Buffer for reading data

Dim bytes(1024) As Byte

Dim data As String = Nothing

' Enter the listening loop. While True

Console.Write("Waitinga connection... ")

' Perform a blocking call to accept requests. ' You could also user server.AcceptSocket() here.

client = server.AcceptTcpClient()

Console.WriteLine("Connected!")

Form1.PictureBox1.Show()

Form1.Label1.Text = "A client has connected to you"

Form1.Label1.Show()

data = Nothing

' Get a stream object for reading and writing

stream = client.GetStream()

Dim i As Int32

' Loop to receive all the data sent by the client.

i = stream.Read(bytes, 0, bytes.Length)

While (i <> 0)

' Translate data bytes to a ASCII string.

data = System.Text.Encoding.ASCII.GetString(bytes, 0, i)

Console.WriteLine("Received: {0}", data)

' Process the data sent by the client.

data = data.ToUpper()

Dim msg As Byte() = System.Text.Encoding.ASCII.GetBytes(data)

' Send back a response.

stream.Write(msg, 0, msg.Length)

Console.WriteLine("Sent: {0}", data)

i = stream.Read(bytes, 0, bytes.Length)

End While

' Shutdown and end connection

' client.Close()

' Console.WriteLine("SocketException: {0}", e)

Finally

server.Stop()

End Try

Console.WriteLine(ControlChars.Cr + "Hit enter to continue....")

Console.Read()

End Sub 'MainEnd Class'MyTcpListener

according to this http://tech.xster.ne...eads-on-vb-net/ adding the code

Me.CheckForIllegalCrossThreadCalls = False

should make it work but it doesnt..... why does me. always error I remove it and the error is gone but still this code does nothing

"

Form1.PictureBox1.Show()

Form1.Label1.Text = "A client has connected to you"

Form1.Label1.Show()

data = Nothing"

  • 0
  On 10/11/2012 at 19:01, togermano said:

Is there a sample of that somewhere?

Of course, googling any of the terms I mentionned will return you hundreds of useful results.

Don't disable checking for illegal cross-thread calls. You're making an illegal cross-thread call, disabling checking won't make it any less illegal.

  • 0
  On 10/11/2012 at 20:05, togermano said:

I dont get any of the codes they all use me.whatever and that always causes an error

"Me" is a reference to the current object, for instance if your code is inside your main Form class (like most tutorials assume), then "Me" is a reference to the Form object, which has an Invoke and a BeginInvoke method. Since I suppose you segregated your background thread code to another class, you'll have to pass it a reference to the Form object in order to invoke any methods of the Form from it. Alternatively, you could simply bring that code back to the main Form class and you'd be able to use "Me" to reference to Form then.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Amazon lays off more staff across Goodreads and Kindle divisions by Hamid Ganji Dozens of Amazon employees working on the retailer's book divisions have been laid off. As reported by Reuters, Amazon confirmed that it's cutting jobs across the Goodreads review site and Kindle units, which impacts fewer than 100 workers. Amazon says the recent layoffs across Goodreads and Kindle divisions are meant to improve efficiency and streamline operations. The giant retailer has constantly reduced staff across various divisions over the past few years. According to CEO Andy Jassy, reducing headcounts helps the company to eliminate bureaucracy. "As part of our ongoing work to make our teams and programs operate more efficiently and to better align with our business roadmap, we've made the difficult decision to eliminate a small number of roles within the Books organization," an Amazon spokesperson said. Layoffs recently impacted employees in Amazon's Wondery podcast division, devices and services units, communications, and in-store staff. However, Amazon's Q1 results show the retailer has added about 4,000 jobs compared to Q4 2024. After the Covid pandemic settled down, many companies began laying off thousands of staff they hired during the pandemic to respond to growing demands. The layoff trend among tech firms still exists today, and AI has amplified it. The latest data shows that in 2025, about 62,832 tech employees were laid off across 141 tech companies. Also, 152,922 tech employees across 551 companies were laid off in 2024. More layoffs are expected to occur due to declining economic growth, tariffs, and the expansion of AI across companies. Amazon is also gearing up to double down in AI investments and robotics. The company has recently announced the forming of a new agentic AI team to develop an agentic AI framework for use in robotics. Also, a new report by The Information indicates that Amazon has begun testing humanoid robots for package delivery.
    • Major Privacy 0.98.1.1 Beta by Razvan Serea MajorPrivacy is a cutting-edge privacy and security tool for Windows, offering unparalleled control over process behavior, file access, and network communication. It is a continuation of the PrivateWin10 project. By leveraging advanced kernel-level protections, MajorPrivacy creates a secure environment where user data and system integrity are fully safeguarded. Unlike traditional tools, MajorPrivacy introduces innovative protection methods that ensure mounted encrypted volumes are only accessible by authorized applications, making it the first and only encryption solution of its kind. MajorPrivacy – Ultimate Privacy & Security for Windows key features Process Protection – Isolate processes to block interference from unauthorized apps, even with admin privileges. Software Restriction – Block unwanted apps and DLLs to ensure only trusted software runs. Revolutionary Encrypted Volumes Secure Storage – Create encrypted disk images for sensitive data. Exclusive Access – Unlike traditional tools, only authorized apps can access mounted volumes—blocking all unauthorized processes. File & Folder Protection – Lock down sensitive files and prevent unauthorized access or modifications. Advanced Network Firewall – Control which apps can send or receive data online. DNS Monitoring & Filtering – Track domain access and block unwanted sites (Pi-hole compatible filtering coming soon). Tweak Engine – Disable telemetry, cloud integration, and invasive Windows features for better privacy. Why MajorPrivacy? Kernel-Level Security – Protects at the deepest system level. Unmatched Encryption Protection – Keeps mounted volumes safe from all unauthorized access. Full System Control – Block, isolate, or restrict processes as needed. Enhanced Privacy – Stops Windows & apps from collecting unnecessary data. Perfect for privacy-conscious users, IT pros, and anyone who wants total system control. Major Privacy 0.98.1.1 Beta changelog: The 0.98.1 release of MajorPrivacy introduces significant enhancements and a number of critical fixes aimed at improving usability, localization, and system integration. A major new feature is the introduction of full translation support, allowing the application interface and tweaks to be localized into multiple languages. Initial translations include AI-assisted German and Polish versions, a community-contributed Turkish translation, and Simplified Chinese. Users interested in contributing translations or adding new languages are encouraged to participate via the forum. This version also improves compatibility and deployment by bundling the Microsoft Visual C++ Redistributable with the installer, which is required for the ImDisk user interface. Several important bugs have been resolved. The installer now correctly removes the driver during uninstallation. Tweak definitions have been cleaned up for better consistency. A number of networking issues were addressed, including failures related to network shares and incorrect handling of mapped drive letters. It is now required to use full UNC paths for defining rules involving shared resources. Additionally, configuration persistence issues on system shutdown have been fixed, as well as problems affecting protected folder visibility and rule precedence involving enclave conditions. Finally, the underlying driver code has been refactored, laying the groundwork for better maintainability and future enhancements. MajorPrivacy-v0.98.1.1.exe (0.98.1a) hotfix for #71 Download: Major Privacy 0.98.1.1 Beta | 47.4 MB (Open Source) View: MajorPrivacy Home Page | Github Project page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • OpenAI responds to The New York Times' ChatGPT data demands by Pradeep Viswanathan The New York Times has sued OpenAI for the unauthorized use of its news articles to train large language models. As part of the ongoing lawsuit, the NYT recently asked the court to require OpenAI to retain all ChatGPT user content indefinitely. The NYT's argument is that they may find something in the data that supports their case. Brad Lightcap, COO of OpenAI, wrote the following regarding the NYT's sweeping demand: OpenAI has already filed a motion asking the Magistrate Judge to reconsider the preservation order, since indefinite retention of user data breaches industry norms and its own policies. Additionally, OpenAI has also appealed this order with the District Court Judge. Until OpenAI wins its appeal, it will be complying with the court order. The content defined by the court order will be stored separately in a secure system and will be accessed or used only for meeting legal obligations. Only a small, audited OpenAI legal and security team will be able to access this data as necessary to comply with our legal obligations. As of early 2025, ChatGPT has over 400 million weekly active users, and this data retention order will affect a significant number of them. OpenAI confirmed that ChatGPT Free, Plus, Pro, and Teams subscription users, and developers who use the OpenAI API (without a Zero Data Retention agreement) will be affected by this order. ChatGPT Enterprise, ChatGPT Edu, and API customers who are using Zero Data Retention endpoints will not be affected by this court change.
  • Recent Achievements

    • First Post
      Uranus_enjoyer earned a badge
      First Post
    • Week One Done
      Uranus_enjoyer earned a badge
      Week One Done
    • Week One Done
      jfam earned a badge
      Week One Done
    • First Post
      survivor303 earned a badge
      First Post
    • Week One Done
      CHUNWEI earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      430
    2. 2
      +FloatingFatMan
      239
    3. 3
      snowy owl
      212
    4. 4
      ATLien_0
      211
    5. 5
      Xenon
      157
  • Tell a friend

    Love Neowin? Tell a friend!