4.3 magnitude earthquake reported in Kentucky

By Twiddle
in Real World News

 Share

Recommended Posts

Veteran

Twiddle

Posted
Posted
WHITESBURG, Kentucky (AP) ? The U.S. Geological Survey is reporting that an earthquake centered in Kentucky also rattled other nearby states.

The USGS website says the epicenter of the 4.3 magnitude earthquake on Saturday afternoon was about 10 miles (16 kilometers) west of Whitesburg. Residents in nearby Virginia, West Virginia, Tennessee, North Carolina, South Carolina, Indiana, Ohio and Georgia also reported feeling the temblor.

National Weather Service spokesman Jeff Carico says employees at the office in Jackson, which is about 60 miles (100 kilometers) northwest of Whitesburg, felt the ground shake for about 15 seconds. He says the office has gotten numerous calls, but so far no one has reported any serious damage.

USGS geophysicist John Bellini says the quake is considered "light" and isn't expected to cause major damage.

Source

This better not ruin my trip in two weeks. (<--A joke.) I hope it doesn't escalate, and become anything more.

Grand Master

Skyfrog

Posted
Posted

I was sitting here on my computer when I heard what sounded like a boom, and then it felt like something hit the house. Then everything started shaking; I wasn't sure what was happening at first, this is the biggest quake I've ever experienced. Usually out here we just get a bit of light shaking that many people don't even notice. That was a pretty big one (for this region).

Veteran

Twiddle

Posted
  • Author
Posted

I don't think anyone would be "fracking" in Kentucky. Or any states near it. The New Madrid Fault Line is one of, if not the most dangerous in the country, in terms of the damage it would cause when it eventually "goes off."

If they are, they are supremely stupid.

Grand Master

Skyfrog

Posted
Posted

I don't believe they do that here, we just have strip mining mostly. I'm sure it was just a natural earthquake, been a long time since we've had one.

As for the New Madrid fault, the last big quake was over 100 years ago and it was huge. The Missisippi River flowed backwards for several hours.

Charleston1895.gif

Grand Master

Gerowen

Posted
Posted

I don't think anyone would be "fracking" in Kentucky. Or any states near it. The New Madrid Fault Line is one of, if not the most dangerous in the country, in terms of the damage it would cause when it eventually "goes off."

If they are, they are supremely stupid.

I'm not aware of any fracking operations around here. I live in eastern Kentucky and I was up and awake at the time, but I didn't feel anything. Some of my friends said they felt it shake a little bit, I must have been in the shower or something because I didn't even know about it until about 45 minutes later and people started asking me about it. Looking back though, our dogs started barking at the trees around the time it was supposed to have happened, maybe they felt it.

Kind of crazy, you "expect" quakes in California because it happens quite often, but since they don't happen very often here people often forget what the New Madrid fault is capable of. In 1811 a quake from the New Madrid fault caused the Mississippi river to flow backwards for a while to form Reelfoot Lake.

Veteran

Twiddle

Posted
  • Author
Posted

I'm not aware of any fracking operations around here. I live in eastern Kentucky and I was up and awake at the time, but I didn't feel anything. Some of my friends said they felt it shake a little bit, I must have been in the shower or something because I didn't even know about it until about 45 minutes later and people started asking me about it. Looking back though, our dogs started barking at the trees around the time it was supposed to have happened, maybe they felt it.

Kind of crazy, you "expect" quakes in California because it happens quite often, but since they don't happen very often here people often forget what the New Madrid fault is capable of. In 1811 a quake from the New Madrid fault caused the Mississippi river to flow backwards for a while to form Reelfoot Lake.

I was talking to my buddy who is in Waco, KY (outside of Richmond) on Gtalk, and he said it sounded like shotguns going off near him. Few minutes later it was reported.

What part by the way? I'm from Richmond/Lexington myself.

oh boy I got a work trip coming up that's gonna take me into the area... wish me luck guys...

I'll be there with ya, if it is during Thanksgiving!

Veteran

Twiddle

Posted
  • Author
Posted

Earthquakes can happen anywhere, 4.3 isn't that big. You non-west coast people scare easily ;)

I think it is more fear of the fault that lies under them, rather than a 4.3 earthquake. And the fact, the area is not prepared in the slightest for an earthquake in terms of building structure, or readiness of citizens.

The biggest thing, is the fact the army depot sits outside of Richmond, KY, and it holds a LOT of mustard gas (leftover from past wars). Growing up we had to drill so many times just in case there was ever a leak. An earthquake could rupture those, and if the gas leaks... Well no one in Kentucky would be safe as it would reach all around the state, and carry into states nearby. It would most definitely wipe out eastern KY.

Grand Master

remixedcat

Posted
Posted

what the **** is up with this fracking being done in sensitive areas? I know that my moving itchies aren't for nothing now... I kinda feel like something is telling me to get out of this region... this is just confirming it...

Grand Master

Gerowen

Posted
Posted

The nearest town to me is Salyersville. I don't really live "in" any town, but Salyersville is the closest one. It's about a hundred miles east southeast of Lexington in Magoffin County.

We get jumpy with earthquakes here because they don't happen very often, and nobody really knows what you should do in the event that we have one. Me and mine would be fine because we live out in the woods with some wide open bottoms, and we cut all the trees that would ever be in danger of falling on the house, so I don't think we'd have too much to worry about, but the towns around here don't prepare for that kind of thing. Just earlier this year a tornado touched down and ripped through the business district of Salyersville and tore hell of hinges in West Liberty. 99% of the people here had never seen a tornado in real life, so when an F-3 touched down in town it tore everything to shreds, and many of the businesses that were damaged haven't even bothered trying to re-build.

Grand Master

TAZMINATOR

Posted
Posted

what the **** is up with this fracking being done in sensitive areas? I know that my moving itchies aren't for nothing now... I kinda feel like something is telling me to get out of this region... this is just confirming it...

You can move anywhere you like but it could happen anywhere such as hurricane, tornados, thunderstorms, etc.

I don't care what would happen to my town.. I am not afraid of anything. I used to live in the Virgin Islands for awhile... hurricanes usually come through the islands .... they can stay and re-build.

Veteran

Twiddle

Posted
  • Author
Posted

Haha, okay. 4.3? We just had a 6.5 here last night.

That's fine and dandy, but as I said before. Try being calm when you have a ridiculous amount of mustard gas right near you that could wipe out your state, and carry into others. It is no laughing matter.

Grand Master

remixedcat

Posted
Posted

You can move anywhere you like but it could happen anywhere such as hurricane, tornados, thunderstorms, etc.

I don't care what would happen to my town.. I am not afraid of anything. I used to live in the Virgin Islands for awhile... hurricanes usually come through the islands .... they can stay and re-build.

thing is the chemical industries here make it even more scary..... other regions don't have near the amount of chemical plants, storage, etc as the region I reside does here. I only moved back here to be close to the family and now that my mom wants to move and my sister does too than I am going to as well... we are allready making plans...

Grand Master

Gerowen

Posted
Posted

I hope the New Madrid fault is not becoming active. There has been several small quakes centered around it lately.

Maybe it's a good thing. I'd rather have an occasional small tremor to release the pressure than one giant one.

Grand Master

TAZMINATOR

Posted
Posted

thing is the chemical industries here make it even more scary..... other regions don't have near the amount of chemical plants, storage, etc as the region I reside does here. I only moved back here to be close to the family and now that my mom wants to move and my sister does too than I am going to as well... we are allready making plans...

I understand. Wish you and your family the best luck.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals

      By hellowalkman · Posted

      Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By ad47uk · Posted

      A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By ad47uk · Posted

      So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0

      By Copernic · Posted

      MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb

      By Karthik Mudaliar · Posted

      Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times

  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!