Downside of warp drives: Annihilating star systems when you arrive


Recommended Posts

The dream of faster-than-light travel has been on the mind of humanity for generations. Until recently, though, it was restricted to the realm of pure science fiction. Theoretical mechanisms for warp drives have been posited by science, some of which actually jive quite nicely with what we know of physics. Of course, that doesn?t mean they?re actually going to work, though.

NASA researchers recently revisited the Alcubierre warp drive and concluded that its power requirements were not as impossible as once thought. However, a new analysis from the University of Sydney claims that using a warp drive of this design comes with a drawback. Specifically, it could cause cataclysmic explosions at your destination.

To see how the Alcubierre drive could devastate an entire star system, you have to know a little about how it would work. The ship would consist of a central pod, and a large flattened ring around it (pictured below). The ring would have to be made of an as-yet unidentified kind of dense exotic matter capable of bending space-time.

Supply the craft with enough energy, and the very fabric of the universe can be warped. NASA now believes this would require orders of magnitude less energy than Alcubierre originally thought. When activated, space behind an Alcubierre drive expands while contracting in front. The ship itself hums along in a stable pocket, or bubble in space. It turns out the bubble is the problem.

As your faster-than-light ship sails through the cosmos, it?s not alone. Although we often think of space as empty, there are loads of high-energy particles shooting through the void. The University of Sydney research [PDF] indicates that these particles are liable to get swept up in the craft?s warp field and remain trapped in the stable bubble.

warp_drive_starship.jpeg

The longer the journey lasts, the more of these dangerous particles build up. This doesn?t affect the ability of the warp drive to keep bending the laws of the universe ? it?s the stopping that?s going to ruin your day.

The instant the Alcubierre drive is disengaged, the space-time gradient that allows it to effectively move faster than light goes away. All the energetic particles trapped during the journey have to go somewhere, and the researchers believe they would be blasted outward in a cone directly in front of the ship. Anyone or anything waiting for you at the other end of your trip would be destroyed.

Because of a funny little quirk of relativity, there is no upper limit to the amount of energy a Alcubierre drive could pick up. A long trip could vaporize entire planets upon your arrival. The researchers are beginning a new round of number crunching to see how bad the problem is. It?s possible the deadly particle beam could be projected in all directions, making Alcubierre drives unworkable. That spiffy warp ship might make a better weapon than method of transportation.

The Alcubierre drive is, of course, still highly speculative. NASA scientists are working with small-scale models in an effort to produce localized distortions in space, but this new Aussie research could give NASA something to think about. Even with future advances in technology, this method of space flight might prove to be impossible. At least then we wouldn?t have to worry about annihilating everyplace we try to explore.

http://www.extremetech.com/extreme/140635-the-downside-of-warp-drives-annihilating-whole-star-systems-when-you-arrive

Pff, invent the Deflector Array as well then?

Pretty sure if someone manages to bend space to achieve warp they could invent something to deflect the particles away in their sleep.

  • Like 2

If the problem is the build-up of particles over the distance of the trip, it would likely be necessary to make shorter 'burst-trips' if you will, going in and out of warp space so that when the particles are released, it wouldn't be so catastrophic. Of course, you first have to know how much travel would be necessary to build up so many particles that stopping would cause a cataclysmic explosion ahead of you. Then you adjust accordingly.

The funny thing is that (as mentioned above) Star Trek already addressed this idea with the Deflector Array, the shape of the ships, and the configuration of the 'Warp Bubble'.

Does anyone else find it funny that the ship above looks a lot like the early Vulcan ships in Star Trek? (Other than the obvious football in the earlier pic)

vulcan_command_ship_02.jpg

  • Like 2

Navigational deflectors, or bussard ramscoops. Or both. Solved :-)

Also the Starfleet rule that you shouldn't enter or exit warp while inside a solar system exists for a reason ;-)

And good call with the vulcan ship there Shane hehe

Navigational deflectors, or bussard ramscoops. Or both. Solved :-)

Also the Starfleet rule that you shouldn't enter or exit warp while inside a solar system exists for a reason ;-)

And good call with the vulcan ship there Shane hehe

Two good, viable options also.

Of course, it's not really a Starfleet rule; rather a United Federation of Planets rule. Starfleet is an Academy for training officers to pilot Federation ships or other work about Federation vessels. It's the Federation that makes such laws and regulations (such as the Prime Directive). This was a mistake I noticed was repeated in J. J. Abram's Star Trek movie. Federation and Starfleet were used interchangeably as though they were one and the same. But they really aren't.

Navigational deflectors, or bussard ramscoops. Or both. Solved :-)

Also the Starfleet rule that you shouldn't enter or exit warp while inside a solar system exists for a reason ;-)

And good call with the vulcan ship there Shane hehe

But I've seen them enter & exit solar systems using warp.

But, supposedly, you're not supposed to use warp while orbiting a planet, something to do with a gravity well and warp not interacting together would destroy the planet or something along those lines.

Two good, viable options also.

Of course, it's not really a Starfleet rule; rather a United Federation of Planets rule. Starfleet is an Academy for training officers to pilot Federation ships or other work about Federation vessels. It's the Federation that makes such laws and regulations (such as the Prime Directive). This was a mistake I noticed was repeated in J. J. Abram's Star Trek movie. Federation and Starfleet were used interchangeably as though they were one and the same. But they really aren't.

No, Starfleet Academy is where students train in order to enter Starfleet.

Starfleet itself is the name of their combined military and exploration fleet.

The UFP (United Federation of Planets) is a coalition of many worlds that work together. Some members of those worlds choose to enlist in Starfleet, and some of them choose to stay with their own local military and/or exploration fleets.

The wording used in the newest Star Trek film is correct in the usage cases present. Watch it again more closely using the context I've provided above. You will find that every example is correct.

But I've seen them enter & exit solar systems using warp.

But, supposedly, you're not supposed to use warp while orbiting a planet, something to do with a gravity well and warp not interacting together would destroy the planet or something along those lines.

BTW, there is a bit of fuzz surrounding this as it is handled somewhat inconsistently at times. I've viewed it along the lines of there are certain systems in which it is safe to enter/exit warp speed, and certain systems where it is not safe. This is mostly due to the inconsistencies shown...but heck they've even shown warp in atmo before in Star Trek IV on Earth of all places...

No, Starfleet Academy is where students train in order to enter Starfleet.

Starfleet itself is the name of their combined military and exploration fleet.

The UFP (United Federation of Planets) is a coalition of many worlds that work together. Some members of those worlds choose to enlist in Starfleet, and some of them choose to stay with their own local military and/or exploration fleets.

The wording used in the newest Star Trek film is correct in the usage cases present. Watch it again more closely using the context I've provided above. You will find that every example is correct.

BTW, there is a bit of fuzz surrounding this as it is handled somewhat inconsistently at times. I've viewed it along the lines of there are certain systems in which it is safe to enter/exit warp speed, and certain systems where it is not safe. This is mostly due to the inconsistencies shown...but heck they've even shown warp in atmo before in Star Trek IV on Earth of all places...

Ah, man, you're right. My bad.

Hyperdrives is where it's at baby, none of this messing about with warp drive. Check out Stargates speeds compared to Star Treks.

Asgard hyperdrives can hop between galaxies in minutes. It was supposed to take Voyager, what? 75 years to get a mere 70,000 lightyears? (3/4 of the width of our galaxy)

Hyperdrives is where it's at baby, none of this messing about with warp drive. Check out Stargates speeds compared to Star Treks.

Asgard hyperdrives can hop between galaxies in minutes. It was supposed to take Voyager, what? 75 years to get a mere 70,000 lightyears? (3/4 of the width of our galaxy)

Those little guys know their stuff and would bitch slap those star fleet noobs.

but heck they've even shown warp in atmo before in Star Trek IV on Earth of all places...

I remember seeing that in the theatre, back in the 1980s.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ditto that, I have a few Alexa devices around the house to control lighting and such for a disabled person I live with, and it shows a *lot* of ads on the display. The dots are simple but effective. A lot cheaper too.
    • Go for a Echo Dot or Pop instead. These Echo shows just advertise to you.
    • NetSpeedTray 1.3.3 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.3: The Updater Fix A stabilization release that repairs a critical regression in v1.3.2: the app shipped without OpenSSL, which silently broke every HTTPS request — including the built-in update checker (the "Could not check for updates" error many of you hit). This release restores it, hardens the build so it can't happen again, and fixes a startup crash plus four other reported bugs. Changes: Fixed update checking — Resolved a critical issue that prevented the app from checking for updates ("Could not check for updates"). Fixed startup crash with Auto-Cycling — The app no longer crashes on launch after enabling Cycle display mode. Fixed incorrect network speeds on 10GbE adapters — Multi-gigabit network cards now display speeds correctly instead of being stuck at 0. Improved color coding — Default color is shown when idle, and color/threshold changes now apply immediately without restarting. Fullscreen visibility fix — The widget now correctly stays visible over fullscreen apps when Keep Visible is enabled. Improved AMD Ryzen temperature detection — More reliable CPU temperature monitoring for Ryzen processors. Cleaner upgrades — Installer now removes outdated application files during upgrades, preventing DLL/version conflicts while preserving user settings. Improved stability — Fixed potential DLL loading issues by excluding critical OpenSSL and NumPy components from UPX compression. Better settings window — Scrollbars removed and layout improved for a cleaner experience. Localization improvements — Updated translations and completed missing UI text across all supported languages. More reliable releases — Added regression tests covering recent critical fixes, bringing the test suite to 196 passing tests. [full release notes] Download: NetSpeedTray 1.3.3 | 87.9 MB (Open Source) Download: NetSpeedTray Portable | 101.0 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried by Paul Hill There is no shortage of messaging apps out there; we have WhatsApp, Messenger, and Telegram, just to name a few. While Meta has taken steps to incorporate encryption into Messenger and WhatsApp, they still leave a lot to be desired. If you are in the market for a messaging app that promotes security, privacy, and optional anonymity, you'll want to read what I have to say about Delta Chat. For those not familiar with Delta Chat, rather than relying on centralized servers as you do with Facebook Messenger, it relies on email. Essentially, it is a chat interface that feels like a messaging app, but secretly in the background, it is firing off emails. In the past, you used to have to sign in with your email account. When you sent messages to people, it would just be sending encrypted messages to their inbox, which their Delta Chat client would decrypt. When I first learned about Delta Chat, it required users to sign in with an email account, but I was pleasantly surprised upon trying it in 2026 that this is no longer a requirement, or the preferred method was to use the app. Recently, I’ve tried UAD-ng on my old Nokia 3.4 to disable most of the Google apps because the bootloader is locked, and this is the next best option. While finding replacement apps in F-Droid, I came across Delta Chat again, and it has undergone quite a big change since I last used it, with its new chatmail relays, which no longer require you to sign in to your own email account, providing anonymity, and they offer greater security. Android and Desktop Delta Chat apps. Not only does it run on my de-googled phone, but it also works on desktop computers and iOS, making it truly ubiquitous. For me, Delta Chat is a wonderful alternative messenger because it gives you more control. It supports switching between different profiles, which you can set up super quickly; you don’t register a username, you don’t register a password. The only thing you do have is a random string email address on a chatmail relay (which you don’t have to memorize). To maintain access to your profile, you just need to add a second device to your account via QR code or make a backup of your account, which you can restore later. Fail to do these, your account is gone - as it should be if you don’t want to leave accounts that could get hacked later on. My decision to block Google stuff on my Nokia was done for practical reasons; the device sucked when it launched, and it sucks even more now. The nice thing about F-Droid and the apps within is that they’re usually lightweight, free of bloat, and work well on that device. What was inconvenient for me was that it was hard to send messages from that device, say if I wanted to copy a code over to my main phone or send family members a link from that device. That’s when I decided to look at the available chat apps and saw Delta Chat. Another nice thing about Delta Chat is its notifications. Some messaging apps rely on Google’s ecosystem for notification transport on Android; however, with Delta Chat, it can use Google’s solutions if you have Play Services or MicroG installed. Otherwise, it is able to keep a background connection to the chatmail relay server so that you can get notified when you receive a message. As free software, the code of Delta Chat is open for all who want to take it and build upon it. In the future, if the developers of Delta Chat make a catastrophically bad decision and take the app in an undesirable direction, users can take the code and fork the project. This contrasts with closed-source apps from corporations that can take their products in any direction they like. By relying on free software instead of closed-source programs, you actually control your computing. I’ve spoken at length about how running this type of software is like owning your own home rather than renting it. The same applies here; if you use Delta Chat, you don’t need to worry about it going away in the future. Whether it is Telegram, WhatsApp, or Messenger, you are required to register a username and password to use these services. A major flaw in this design is that anyone can try various passwords and potentially break into your account with your complete chat history intact. Sure, there is encryption in Messenger, where you need a second PIN and two-factor authentication in Telegram, but breaches happen all the time. Unlike before, when you used to sign in to your email account to send and receive messages, the primary way to do it now is to create an account on a chatmail relay. The resulting email address is a random string followed by the name of the relay you pick. This means you can start and begin adding contacts Without a username and password, you either need to ensure you have a backup or at least one device running your Delta Chat profile. The primary way to log in on another device is to go to the settings and add a second device. Then, you’ll just scan a QR code with your new device, and it’ll log in to your account and sync all your chat history and contacts. To end users, Delta Chat just looks like any instant messenger; however, it is really sending your messages as encrypted emails to your contact. This is pretty cool from a censorship perspective, as it makes the service more difficult to block. Previously, the main way to use the app was by logging in with email, but nowadays, it’s recommended that you use chatmail relays. Chatmail relays temporarily hold messages in case your device is offline. They are cheap, simple servers that don’t store data as group states. Other information, like your name and avatar, only exists on your device and the devices of those you share your contact information with. The relays are also decentralized and operated by various groups and individuals. It is even possible to set up your own chatmail relay, but most people will want to use one hosted elsewhere. To keep your messages secure, Delta Chat uses a secure subset of the OpenPGP standard that gives you automatic end-to-end encryption. It also uses Secure-Join to exchange encryption setup information through QR-code scanning or invite links. Autocrypt is also used to automatically establish end-to-end encryption between contacts and all members of group chat, but sometime this year Autocrypt v2 will be rolled out, bringing post-quantum resistant encryption and forward secrecy. The Delta Chat FAQ is an interesting read that explains many more details about the app. Credit: Pexels Delta Chat is unique among messaging apps because it is built on email, a technology that’s decades old and isn’t going anywhere soon. What’s more is that email is not centralized either, so it’s far more difficult for any authoritarian regime to disrupt the Delta Chat app. I haven’t spoken too much about features yet, so I will do that now. Delta Chat allows you to do one-on-one chats, group chats, and create channels. It also supports file sharing and making audio and video calls when chatting one-to-one, but it’s not available for group chats right now. At the time of writing, the calling functionality is disabled and can be enabled in Settings > Advanced > Debug Calls. I have used the video calling feature, and the quality is excellent. It works over WebRTC, another open standard. The app also lets you send voice notes, enables disappearing messages, and has its own app ecosystem. I did try playing chess one time there, but it was a bit spotty; though, we did manage to complete the game with a victory for me. To add people to Delta Chat, you can either give them your Delta Chat link or your QR code to scan. These are the only ways to add users, so you won't have any spam bots bothering you. If the people you want to chat with don't have the app yet, just send them your link, and it will take them to a webpage where they can install the app and then add you. It's really quick for them to install it and get started, which is nice. Credit: Microsoft. The Majorana 2 quantum chip unveiled in 2026. I do not think quantum computers are too far out now, and I do hope that Delta Chat is able to push out Autocrypt v2 sooner, rather than later, so bad actors do not attempt to collect encrypted communications and then decrypt them in the future using quantum computers. By getting people’s messages post-quantum-safe now, users won’t have to worry when quantum computers start cracking legacy encryption. Overall, I would recommend this app to people who are already past WhatsApp and Messenger and have perhaps begun using apps like Telegram or Session. It shares a lot of characteristics with these apps and goes a lot further than Telegram in terms of security. By being based on email, it is also resistant to censorship, and the lack of a username and password makes you anonymous (if you want to be) and safe from brute force password cracking attempts. Let me know in the comments if you’ve tried Delta Chat recently. Do you think it's a good bulwark against governments that are tightening their grip on the internet?
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!