ESA to bid on building NASA Orion spaceships service module


Recommended Posts

http://www.spaceflightnow.com/news/n1211/22mpcv/#.ULGrMYl5nTo

ESA member states fund Orion service module

Buoyed by a surprise investment from Britain, the European Space Agency secured approval from its member states on Wednesday to develop a service module for NASA's Orion deep space exploration vehicle, giving the continent a stake in human missions beyond low Earth orbit.

The initial investment, worth $320 million over the next two years, will start development of a propulsion and power module for the Orion multipurpose crew vehicle, or MPCV.

Britain, which has eschewed contributing the space station in the past, put the proposal over the top with a pledge to pay 20 million euros, or about $25 million, for the service module.

Jean-Jacques Dordain, ESA's director general, said the development could help a European astronaut secure a spot on Orion crews bound for deep space, the moon, or asteroids. The European-built service module will contain fuel tanks, provide propulsion, and hold Orion's solar panels to generate electricity. NASA plans to provide a maneuvering engine to mount on the service module.

In a meeting of government ministers in Italy on Tuesday and Wednesday, ESA's member states haggled over the agency's budget, eventually settling on 10 billion euros, or $13 billion, in spending from ESA's 20 member states over the next few years.

Top agenda items included decisions on a future European launcher and the extension of Europe's involvement in the International Space Station.

Governments agreed to upgrade Europe's existing Ariane 5 launcher and put off a decision on a replacement rocket until mid-2014. And officials came to a consensus to continue ESA's support of the space station until 2020, a pivotal decision which hinged on the Orion service module.

The first flight of a full-up Orion capsule is scheduled for launch in late 2017. The unmanned mission will launch on NASA's Space Launch System, a heavy-lifting rocket being developed to facilitate missions beyond Earth orbit.

The flight plan calls for the 16.5-foot-diameter capsule to fly around the moon and return to Earth on a voyage lasting more than one week.

"The first flight is to go to the moon," Dordain said. "And we can say we will be part of the first flight of the MPCV by delivering the service module.

Construction of the service module for the 2017 mission will pay back NASA for Europe's share of the space station's operating costs. The space station partners prefer supplying a "barter element" to reimburse NASA for the costs rather than paying in cash.

>

atv_mpcv.jpg

Actually this version of the OSM looks more capable to me. Good stuff.

I agree, but by the time Orion is flying crews SpaceX is likely to be well along on the next-gen Dragon, which Elon Musk is hinting will be significantly different than the COTS / CCiCAP Dragon. Then there's the staged combustion - methane fueled Raptor engine they're working on.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!