Compressed air - how long does it last?


Recommended Posts

http://www.pcworld.co.uk/gbuk/fellowes-hfc-free-air-duster-10810373-pdt.html

How long would something like that last? Seems expensive if it will only last for one clean of the inside of my PC!

It's grown unbearably noisy so I think the fan probably needs cleaning.

Thanks :)

Not long if you waste it on fans its for cleaning the motherboard and other delicate parts not for cleaning dust off plastic or cpu coolers. If you do a lot of maintenance one of these is a great investment http://www.metrovacworld.com/DataVac%20Electric%20Duster there are sellers in Europe that sell a 230v model.

Wouldn't use it on a motherboard but for fans and cpu coolers its great.

One can inflates my cat !

Using the blower from a vacuum cleaner would be cheaper.

OR

http://www.amazon.co...+Air+Compressor

Plug-in wall, blower tool

I read that vacuums create too much static and can damage components, is that right?

I've got a compressor for my car tyres, I might try using that!

Thanks :)

Not long if you waste it on fans its for cleaning the motherboard and other delicate parts not for cleaning dust off plastic or cpu coolers. If you do a lot of maintenance one of these is a great investment http://www.metrovacw...ectric%20Duster there are sellers in Europe that sell a 230v model.

Wouldn't use it on a motherboard but for fans and cpu coolers its great.

Had this PC for five years or so and I've never cleaned it :p

I'd advise to rather clean the fan by taking it out and cleaning carefully with wet cleaning wipes. There's this wretched type of fine dust that clings to fan blades and stuff and no amount of air will get that off.

Air cans are good for blowing out crap out of heatsinks and such hard or impossible to reach places and things. For everything else, wet wipes do a better job.

Now, given that you don't go nuts with it (and don't use it as a torch - which I do, it's fun!), 350ml bottle will last for quite many times.

I always just use an air compressor with a tank on it, I can change the PSI and just blow away with air, not a chemical using the nozzle tools... you just have to make sure you have one that doesn't let oil into the tank when compressing the air

I always just use an air compressor with a tank on it, I can change the PSI and just blow away with air, not a chemical using the nozzle tools... you just have to make sure you have one that doesn't let oil into the tank when compressing the air

I'd be careful of condensation also, since there will be moisture in the line.

Another +1 for the DataVac Electric Duster 500. I have it, it is one of the BEST things i've bought last year. it makes PC's look like new and makes them fun to clean. Just remember to hold the fans in place as you blow them out so you don't kill the barrings.

I'd be careful of condensation also, since there will be moisture in the line.

yeah, that's one of the reasons you always unplug and remove CMOS batteries when cleaning, even alcohol wipes can ruin electronics when electricity is present cleaning the insides

I'd be careful of condensation also, since there will be moisture in the line.

I've seen that on unmaintained compressors (not drained frequently and/or building sized ones that condensate in pipes), but for small home ones as long as you are draining the water every use or so, it should be fine for blowing the dust out of a computer.

Another +1 for the DataVac Electric Duster 500. I have it, it is one of the BEST things I've bought last year. It makes PC's look like new and makes them fun to clean. Just remember to hold the fans in place as you blow them out so you don't kill the bearings.

^ Fixed your spelling ^

Ships in Certified Frustration-Free Packaging :laugh: hahaha

I've tried that stuff and was surprised how little was in a can bad value !

A buddy of mine bought me a gun that takes catridges found in paint ball guns but they too run out super quick.

basiclly i think air blowing is dumb. in order for them to be effective they have to blow hard enough

and if they do you risk damaging your machine. There is resistors you need a magnifying glass to see everywhere

and if one is loose you will blow it clean off with a compressed air system. Not a good idea !

I would use quetips (cotton tip sticks) with either alchohol 99% (isopopenyl) or a half cup off warm water with a drop of dish soap mixed in.

and make sure to roll the tips on your pc parts not rub up and down or you can snag small parts and pull them off !

SO roll banck n forth and make sure its dry before you power up ;)

ANd that package of que tips will last a million ties longer than canned air.

I'd also never clean a pc with out taking the opportunity to inspect the capacitors for bulging on th top

or leaking from the bottom etc It happens and when it does its bad ! ..about 3 weeks ago i had one explode on me

and it was like someone shot a gun off beside me lol ..scared me half to death lol

This topic is now closed to further replies.
  • Posts

    • Everyone else has said it. I'm gonna say it - you don't know what you're talking about. I do. I have two laptops. One work, one personal. I have access to two more laptops - both personal. At home I manually update my personal laptop when I see on Neowin that there is an update - I carry on and only apply the updates when I am ready. My work one only updates when my workplace decides to send it - I carry on and only apply the updates (when they actually arrive, which is usually days after the release) when I switch off the laptop at the end of the day as usual. The two other personal laptops only get updated when I get to it which is rarely - the people who own them carry on using them until I get to it and update them. All of the browsers on all laptops are configured to restore the tabs when launched. Google and Microsoft have changed from 6 weeks to 4, and it looks like it's going to move to 2. None of these changes affect how any of these browsers on the laptops are used. Not one jot. My advice to you is stop panicking whenever you see an update. Just carry on with what you're doing. This even benefits you in a way - from your comment you sound like you don't like the changes or the frivolous new features - great - then carry on as before!
    • AMAZON needs to take total accountability for this.
    • Server Summit had a heap of announcements, ADCS changes are baller.
    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!