Post Your Workstation Photos


Recommended Posts

Let me answer for him :p

1): So it looks nice :p ?

2): A GFX card box.

1): ....

2): Why ? i think its a nice keyboard, its not like it needs to be 2010 proof.

its not a gfx card box.. its a intel p4 box

edit: doh.. sorry my bad.. its a 3dprophet videocard box..

my updated rig

pentium4 2.6c

corsair twinx-ll 1024GB ddr400

msi 875p neo-fis2r rev1.9

wd caviars 120gb and 200gb SATA

sony cd-rw

sony cd-rw dvd combo

sony dru-510a dvd writer

ati radeon 9600xt

soundblaster audigy

hec475 psu

winfast tv2000xp

silverstone card reader

logitech cordless mx duo

x1.jpg

x2.jpg

x3.jpg

x4.jpg

x5.jpg

Thought I would contribute a pic of my cpu tube. Sorry about the quality, its a pic from a video camera.

http://www.salafiyyah.org/images/office/tube.jpg

Lets just say I got a Athlon 3000 running at 2.35 speeds, and the temps are 28-31 degrees. Could put it higher, but in that pc, I only have 333 ram. I bought an extra 1gig of pc3200 for my other rig, bringing it up to 2gig now. (The pentium 4 running at 3.3).

hah thats awesome linuxman, hows it set up

Well, I went to Home Depot and bought some of that dryer tubing, but coudn't find what I needed to hook it up. So I went to fry's and actually found a kit that has everything. So, its set up with the fastest fan I could find blowing air into the tube from the front of the case, and of course, goes to the cpu HS/Fan which blows the cool air directly on the cpu. My temps are real low. I suggest anyone that really does't want to get involved with watercooling right now, if your case has room, give it a try. It works great.

Like I said, you can find the kit at Fry's for $20.00.

I was kinda concerned, but its not as moveable as you would think, so the tubing itself is pretty tight. The only area where it could cause a problem, I covered it a bit with electrical tape. Works great. Very stable temps too. stays pretty much at 31. Playing morrowind brought it up to 36, so I'm pretty happy.

I really wanted it for my p4, but the stupid stock hs/fan won't work with it.

:D HP Pavilion 761n(|Athlon XP 2000+ @ 1.67ghz|80 gb Hard Drive|512 Mb Ram|DVD Drive & CD Writer|)

http://www3.telus.net/gnewman3/hp1.JPG

http://www3.telus.net/gnewman3/hp2.JPG

http://www3.telus.net/gnewman3/hp3.JPG

:) My Bulit Computer(|Pentium 2 @ 266mhz|6 gb Hard Drive|92 Mb Ram|CD-Rom Drive & CD Writer|)

http://www3.telus.net/gnewman3/ptwo1.JPG

http://www3.telus.net/gnewman3/ptwo2.JPG

:no: Packard Bell Multimedia M415 (|Pentium 1 @ 166mhz|3.2 gb Hard Drive|24 Mb Ram|CD-Rom Drive|)

http://www3.telus.net/gnewman3/packardbell1.JPG

http://www3.telus.net/gnewman3/packardbell2.JPG

:pinch: NEC Versa 4050H (|Pentium 1 @ 90mhz|1.2 gb Hard Drive|48 mb Ram|CD-Rom Drive|)

http://www3.telus.net/gnewman3/nec1.JPG

http://www3.telus.net/gnewman3/nec2.JPG

well hi everyone!

I felt like for a change in my house. I decided to get rid of my great, wonderful, amazing (NOT, lol!) packard bell. I was sick and tired of it. I couldn't find the certain ram for it, it sucked on the internet, hated my network, sound card was just about dead and lots more. Gave it back to my grandma, lol.

Cause of that I decided it was time to accually have the Pentium 2 on a monitor and not a tv :p . I had to buy a new video card due to that one in it was fried. I went to a used store and picked up a ATI 1mb video card (forgot specs but just like my old ATI All-in-wonder just without TV Outs, TV-in, Cable, etc). It is doing really well!

And, nothing has changed with my Hp and NEC. My laptop is still doing well. Wait, never mind, I replaced my printer with a HP PSC1350 All-In-One and put the printer on the Pentium 2.

Hope to talk to you all soon, nice systems everyone! :woot:

Here's mine, old room, same desk etc... but i change my pc , as seen on Desk01, and 02

;) Comments welcome...

Desk00

Desk01

Desk02

Ho And... The most important thing...

My Trash

And...

My Microsoft Caf? Machine

John G.

Make sure to put the patch for MSBLASTER on your coffee maker, you know, you don't want to not be able to have coffee! LOL!!!! GASP!! NO COFFEE!!

Wow. ATI 1meg video card. Didn't know you could still buy, or even find one of those. Guess it wouldn't work well with games, but you said it does good for everyday stuff? What OS you running?

I found it at a used computer store for $15 CND. I'm not doing any gaming on this system accept my brother plays monopoly junior, magic school bus and other Cereal Box Games (lol). It's doing really well. The one thing I think it is doing so good is that it has a 12 mb Video Accelerator. Lovin' it, lol. It's running Microsoft Windows Plus! 98. Overall, it's a great computer.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
    • Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • yeah it seems to be Edge only. The dialog buttons work as expected in Chrome and Firefox. The phone is using Android 16 (OneUI 8.5) and Edge version  149.0.4022.53
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!