Show us your Workstations! - 2013 Edition

By Chasethebase
in Hardware Hangout

 Share

Recommended Posts

Grand Master

Arceles

Posted
Posted

@Aceles - With a little work, it can be done, even in a small case as that.

 

@LogicalApex - Exactly what I meant.

 

?hm... while I do agree that wire management would look better, the truth is that no air flow is interrupted, in fact, while I do have more fans the noise produced by them is far lower than with my previous case, also temperatures are far improved, here is a photo of the little cable management done (the wires that stand out in the previous photo correspond mainly to only fan connectors)

 

eytu.jpg

 

Also note how the graphics card fits quite precisely and without effort even with the aluminium shroud 

 

tod4.jpg

 

.... and just another pick showing how this motterboard also lets little space for the sound card to fit... and yet it's perfect:

 

fwi7.jpg

 

The sound card in question, creative z OEM version and the GPU:

 

yon9.jpg

 

g9b1.jpg

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

Seeing your first picture, you have wires going every which way on and around the board. AFAIK, you are distrupting a lot of air from the front fans.

Grand Master

Arceles

Posted
Posted

Seeing your first picture, you have wires going every which way on and around the board. AFAIK, you are distrupting a lot of air from the front fans.

There is just one front fan, the one shown in the second picture.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted

My V2... since the other case didn't have enough fans:

 

7f5z.jpg

 

Do tell me, how do you call that wite managed, look on the right side. Wires are going every which way.

Grand Master

Arceles

Posted
Posted

Do tell me, how do you call that wite managed, look on the right side. Wires are going every which way.

 

I never say that there were cable management, I said however that while the cables look like that they don't obstruct the fans flow, I also make sure that the side panel fans are not obstructed by the cables when I close the case. Air enters from the front panel almost exclusively for the GPU, then the two side panel fans supply air for the CPU, the back fan plus the two upper fans send away the hot air, the fan that it's most obstructed is the second upper fan in the top right, but that's because the whole bd drive is obstructing it.

Grand Master

Jamushroom Veteran

Posted
  • Veteran
Posted

I never say that there were cable management, I said however that while the cables look like that they don't obstruct the fans flow, I also make sure that the side panel fans are not obstructed by the cables when I close the case. Air enters from the front panel almost exclusively for the GPU, then the two side panel fans supply air for the CPU, the back fan plus the two upper fans send away the hot air, the fan that it's most obstructed is the second upper fan in the top right, but that's because the whole bd drive is obstructing it.

Don't you have a front-fan? That's kinda obstructed by the cables so that no cool air can get to the PSU.
Grand Master

Arceles

Posted
Posted

Don't you have a front-fan? That's kinda obstructed by the cables so that no cool air can get to the PSU.

PSU has it's own ventilation, covered by dust filter, below the case.

Grand Master

Jamushroom Veteran

Posted
  • Veteran
Posted

PSU has it's own ventilation, covered by dust filter, below the case.

Yeah but still, having air going around it from the front fan helps it run cooler as well. Plus the front fan adds ambient cooling to the whole case, which is obstructed by the cables.

I don't know if it's possible to hide the wires with that case though, but having the front fan blow through the case is always better than having those cables there. Also, maybe it just looks like there are a lot of cables obstructing the fan? We can't see behind the harddrive so there might as well be more space than cables there.

Grand Master

Arceles

Posted
Posted

Yeah but still, having air going around it from the front fan helps it run cooler as well. Plus the front fan adds ambient cooling to the whole case, which is obstructed by the cables.

I don't know if it's possible to hide the wires with that case though, but having the front fan blow through the case is always better than having those cables there. Also, maybe it just looks like there are a lot of cables obstructing the fan? We can't see behind the harddrive so there might as well be more space than cables there.

 

Front fan runs almost just for the GPU since the GPU "divides" the interior of the case, hence the two side panel fans. PSU has a very nice low blade count fan, which is both silent and pulls enough air for the PSU. Case temperature reaches a minimum of 32? when idle, 39 on normal usage. I think everybody is failing to see how efficient is this case, just because the cables are not "arranged" beautifully. Considering that I have a 120W+ CPU with NB overclocked and a 225W+ GPU (which is overclocked too) and my temps are 47? for CPU under prime95 and 70? for GPU on heavy gaming, I say I have quite good temps on one of the smallest form factors. Also no, front fan isn't obstructed at all, there are cables behind the CPU but they are not in bulk covering the whole fan, at best I say they cover 15%.

Grand Master

Jamushroom Veteran

Posted
  • Veteran
Posted

Front fan runs almost just for the GPU since the GPU "divides" the interior of the case, hence the two side panel fans. PSU has a very nice low blade count fan, which is both silent and pulls enough air for the PSU. Case temperature reaches a minimum of 32? when idle, 39 on normal usage. I think everybody is failing to see how efficient is this case, just because the cables are not "arranged" beautifully. Considering that I have a 120W+ CPU with NB overclocked and a 225W+ GPU (which is overclocked too) and my temps are 47? for CPU under prime95 and 70? for GPU on heavy gaming, I say I have quite good temps on one of the smallest form factors. Also no, front fan isn't obstructed at all, there are cables behind the CPU but they are not in bulk covering the whole fan, at best I say they cover 15%.

We don't see that because we only see the side of the case and judge it off of that. There's probably space behind the harddrive (which is also cooled by the front fan) but because I don't see that, I instantly think there's more cables behind it. If you hadn't seen the case IRL and only saw that photo, I'm sure you'd think it's all cramped as well.

Also, I don't think there are cables behind the CPU because the motherboard is behind the CPU :p I think you meant harddrive ;)

Grand Master

Arceles

Posted
Posted

We don't see that because we only see the side of the case and judge it off of that. There's probably space behind the harddrive (which is also cooled by the front fan) but because I don't see that, I instantly think there's more cables behind it. If you hadn't seen the case IRL and only saw that photo, I'm sure you'd think it's all cramped as well.

Also, I don't think there are cables behind the CPU because the motherboard is behind the CPU :p I think you meant harddrive ;)

Lol, yeah... I meant the harddrive, my bad~ :D

  • 2 weeks later...
Grand Master

Cosmin

Posted
Posted

Ok how is everyone got clean desks? WTF guys! you a men not women make some mess! I would show you mine but not much point, all you will see is a bit of the monitor peaking through some dust and clutter :D

Thought that UK guys are much more..orderly and sensitive to disturbance :laugh:

Rising Star

gxsaurav

Posted
Posted

I have waited my whole life to post in this thread. Today my life long dream is complete. I can rest in peace and do my research on Unicorns.

 

Anyway, I recently upgraded my old PC running AMD APU to AMD FX 6300 along with a new GPU. Here are some pics. Full PC config http://pcpartpicker.com/b/ENs I call it RED.

 

1001904_10152099953988957_1121698112_n.j

 

1077217_10152103491008957_1762582840_o.j

 

1174912_10152186167328957_243659469_n.jp

 

1146154_10152150135898957_987302017_o.jp

Grand Master

tsupersonic

Posted
Posted

It looks good, but could be improved. Could you not connect the fans to your mobo if there are any fan headers? Can you not route any cables behind the motherboard tray? Also if you ever do a PSU upgrade, modular is great. You don't have to get full modular, but it'll help tremendously with cable management. 

Rising Star

gxsaurav

Posted
Posted

It looks good, but could be improved. Could you not connect the fans to your mobo if there are any fan headers? Can you not route any cables behind the motherboard tray? Also if you ever do a PSU upgrade, modular is great. You don't have to get full modular, but it'll help tremendously with cable management. 

 

I have three 4pin fan headers in motherboard. The rear and top exhaust are PWM so they are temperature controlled by the motherboard already. The front and side panel have 4 pin molex connectors which I cannot connect to motherboard hence they are always running at full speed and intake cold air from outside the cabinet.

 

Cable management is an on going process. I open the cabinet every weekend and see what I can do better with the cables. Right now what you see is the most optimized I could get due to length of cables. I could have the pushed some more cables behind motherboard tray but I need them for the 4pin molex connector for front fan. Notice that empty molex connector next to front fan in the picture above, towards most right...that goes in the side panel fan. However, I will see what I can do this weekend. I got a bunch of cable ties with me.

 

Even with this cable management, there is nothing in front of the front intake fan to obstruct air from coming inside. I tested this with coloured smoke too. Air comes from front and side. Side panel throws air at the GPU's heat pipe and CPU cooler's body. Both GPU and CPU suck in cold air coming from the front 200mm intake fan. Hot air is exhausted from top via the exhaust fan. Any residual hot air is exhausted via rear exhaust fan.

 

I just purchased this PSU so not going to upgrade for some years. Modular were over $40 costly here in India so I did not go with that.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • UK to ban under-16s from social media following a six-week trial with teenagers

      By AnalystDan · Posted

      Did you read or just jump to the comments?
    • UK to ban under-16s from social media following a six-week trial with teenagers

      By AnalystDan · Posted

      No. They are not.
    • UK to ban under-16s from social media following a six-week trial with teenagers

      By AnalystDan · Posted

      Did Labour lose big? They had losses there is no doubt. However let's look at the reality. The conservatives have 168 councils I believe. Labour have 113 and Reform...38. That's a lot of growth for Reform granted. But that is not a wipeout, Reform don't have the majoring in fact at 76 I believe the Liberal Democrats have nearly twice the councils Reform do. So I am thinking there is a lot more noise than signal going on here. Now then let's talk about the law. It's an age restriction. We do it for cigarettes, **** and alcohol. This idea that some kids will find there way around it so it's not worth even trying is really really sad. Hell we can't stop every murder. Should we stop trying there too? That is the logical conclusion.
    • Major Xbox layoffs may claim South of Midnight developer Compulsion entirely

      By Lamp0 · Posted

      A game not selling doesn't mean the people working on it did "bad work". It reviewed decently well. It was also on gamepass on release.
    • PDF Shaper 15.6

      By Copernic · Posted

      PDF Shaper 15.6 by Razvan Serea PDF Shaper is a set of feature-rich PDF software that makes it simple to split, merge, watermark, sign, optimize, convert, encrypt and decrypt your PDF documents, also delete and move pages, extract text and images. The program is optimized for low CPU resource usage and operates in batch mode, allowing users to process multiple PDF files while doing other work on their computers. PDF Shaper is available in three editions - Free, Premium and Ultimate. Compare and pick edition which is suitable for you. Compatible with Windows 7, 8, 10, 11. Features: Convert PDFs to Word, text, or image files (and vice versa) Merge, split, and watermark documents with precision Insert, move, delete, rotate and crop pages/ranges Rename and organize PDF collections efficiently Encrypt with advanced AES password protection Apply multiple digital signatures for documents Extract text, images, or complete pages from any PDF Benefits: Easy-to-use, intuitive user interface Low CPU resource usage during any process, including conversion Free for personal use and for any non-commercial organization Supports Unicode characters Supports batch processing for any operation Small installation size PDF Shaper 15.6 changelog: Improved overall program performance. Improved image rendering in all tools. Improved XMP information extraction. Improved compatibility with ARM64 systems. Improved DOC to PDF conversion: Improved support for font files. Improved support for picture cropping. Improved support for list formatting. Improved support for text line spacing. Download: PDF Shaper 15.6 | 8.0 MB (Free for personal use only) Link: PDF Shaper Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran

  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      +Edouard
      204
    3. 3
      PsYcHoKiLLa
      126
    4. 4
      Steven P.
      90
    5. 5
      neufuse
      72
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!