Show us your Workstations! - 2013 Edition


Recommended Posts

While your cpu may be cool, how are your other hardware, HDDs, GFX? That is not well managed.

Not reaching above 49 degress. Plus I have an SDD, under load, my HDD reaches 49 degrees. remember that all the 6 fans are doing their work.

 

Edit: Note that my only HDD is a 2.5" one, I have seen those things reach 56 degress... here it's not the case.

 

Edit 2: My GPU, even overclocked, reaches a maximum of 69 degrees. Hell man, you just can imagine a system this small and be perfectly cooled, have you ever tried to overclock a laptop? I did, a quad core from 1.6 GHz to 3.0 Ghz, that thing could even emulate PS2 games. maximum temps were quite high (89?) yet never failed and I still use it as a my laptop, just not anymore for gaming. A desktop of such dimensions is... I don't know, A giant leap of space and ventilation for me.

May be cool enough, but it's far away from neat. Get some cable ties.

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

dg0j.jpg

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

The problem with that case is poor design. From the pictures I see, there is no area behind the motherboard to hide cables. It looks like a very cramped case in general, and not ideal at all for air flow. 

 

P.S. that flow diagram screams OCD ;) Not saying that's a bad thing. It's good that you put a lot of though into it! 

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

 

I know the way fans blow. Top and back fans exhaust, front fans blow in.

The problem with that case is poor design. From the pictures I see, there is no area behind the motherboard to hide cables. It looks like a very cramped case in general, and not ideal at all for air flow. 

 

P.S. that flow diagram screams OCD ;) Not saying that's a bad thing. It's good that you put a lot of though into it! 

 It actually is very efficient with temps, therefore airflow must be excellent considering my components.

 

The sound card in question, creative z OEM version and the GPU:

 

yon9.jpg

 

 

 

I am looking to buy the same sound card. How is it compared to onboard Realtek audio in games? Does Audio positioning still works in games now that EAX etc is no longer supported.

 

Also, does the card have connector for front panel HD Audio?

that's pretty good temps for gaming

 

Thanks! I wanted to prove that you don't need a giant case to obtain the optimal cooling on components like mine, including putting a FX8350 processor on a microATX board*

 

I am looking to buy the same sound card. How is it compared to onboard Realtek audio in games? Does Audio positioning still works in games now that EAX etc is no longer supported.

 

Also, does the card have connector for front panel HD Audio?

 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

 

@Arceles: in our, a bunch of neatfreaks, last chance to catch you red-handed - what are ambient temperatures of your room and do you have AC in the house? :p

I don't have AC and I currently live in UK, Sheffield, those temps were from yesterday with closed windows. Temperature was around 27?C** on my room... no, I don't have AC since I'm an student living on a cheap but nice house :D

 

Edit: You can really fell how the moment the processor get's used the case sucks away the hot air, you just have to put the and above it and both top fans let you feel wamness... which I must say, I'm quite impressed since the 120mm 12.5mm depth fan it's the most obstructed one, yet it really get's hot air from somewhere and pulls it out even with the whole bluray drive below it.

 

*I undervolted my processor at stock speeds, applied heatsinks to VRMs and put a fan over them, otherwise throttling was present. I suffer no throttling nowadays thanks to that small mod, I really wanted to use my miniATX case :D

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

Thanks! I wanted to prove that you don't need a giant case to obtain the optimal cooling on components like mine, including putting a FX8350 processor on a microATX board*

 

 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

 

 

The only thing that makes Realtek onboard audio redeeming is the custom audio software i.e SB cinama or the razer surround otherwise the stock realtek software is just horrid. I also have and external sb x-fi go usb sound card is much better with compared to the Realtek onboard audio. Although, it's not as high-end as your sb sound card but I'm able to adjust the sound settings to match my listening preferences. The usb one has the thx and eax just like the pci-e counterpart, but i'm sure the pci-e counterpart has more added audio feature that the usb one doesn't have 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

 

I checked some videos on YouTube comparing the Audio quality and positioning in games and found Creative to be very wide and better. Xonar was good but Creative was audibly better.

 

Your card looks like an OEM version due to lack of the EMI shield. Which Speaker or headset do you use with these?

The only thing that makes Realtek onboard audio redeeming is the custom audio software i.e SB cinama or the razer surround otherwise the stock realtek software is just horrid. I also have and external sb x-fi go usb sound card is much better with compared to the Realtek onboard audio. Although, it's not as high-end as your sb sound card but I'm able to adjust the sound settings to match my listening preferences. The usb one has the thx and eax just like the pci-e counterpart, but i'm sure the pci-e counterpart has more added audio feature that the usb one doesn't have 

 

I won't be going for a USB device as I have all PCIe slots free in my motherboard. Besides, I want to buy ones and use for many years to come.

 

I was checking difference between Recon3D and Sound Blaster Z. There isn't much difference other then SNR. Recon3D has 106 db while Sound Blaster Z has 116. How much will this affect audio quality if all I am using is either In-ear monitors like Razer Hammerhead or a 5.1 channel headset? Any idea?

I checked some videos on YouTube comparing the Audio quality and positioning in games and found Creative to be very wide and better. Xonar was good but Creative was audibly better.

 

Your card looks like an OEM version due to lack of the EMI shield. Which Speaker or headset do you use with these?

 

I.... have a very weird setup :D, first I connect with a QED cable from the back port of the sound card to a sony car stereo CDX-GT350MP, Then it goes to a pair of speakers JBL GTO328, and to an active subwoofer Logitech S220 through an auxiliary out port of the car stereo, the idea of this is to have my very own configuration of bass/middle and treeble. The sound quality is excellent but you have to ve carefull about ground loops since a configuration like this is very prone to them, I in fact have to connect the ground port of the car stereo to the chasis of my PC to eliminate any hum that there is on audio.

 

I won't be going for a USB device as I have all PCIe slots free in my motherboard. Besides, I want to buy ones and use for many years to come.

 

I was checking difference between Recon3D and Sound Blaster Z. There isn't much difference other then SNR. Recon3D has 106 db while Sound Blaster Z has 116. How much will this affect audio quality if all I am using is either In-ear monitors like Razer Hammerhead or a 5.1 channel headset? Any idea?

The Recon3D is known to have the same audio processor but less dedicated audio circuitry, i.e. they get the audio straight from the audio processor instead of going the way the Creative Z does, which is through quite a lot of filters and a nice DAC. It's been known that the Creative Z is better than the Recon3D, as for your headphones, I know the creative Z does have an special port for headphones which is amplified, so you can put very high ohm drivers in there.

 

Note, the front port does not have the same characteristics as the back ports, the back ports are the ones that provide the most fidelity on audio.

I don't have AC and I currently live in UK, Sheffield, those temps were from yesterday with closed windows. Temperature was around 27?C** on my room... no, I don't have AC since I'm an student living on a cheap but nice house :D

 

Edit: You can really fell how the moment the processor get's used the case sucks away the hot air, you just have to put the and above it and both top fans let you feel wamness... which I must say, I'm quite impressed since the 120mm 12.5mm depth fan it's the most obstructed one, yet it really get's hot air from somewhere and pulls it out even with the whole bluray drive below it.

 

*I undervolted my processor at stock speeds, applied heatsinks to VRMs and put a fan over them, otherwise throttling was present. I suffer no throttling nowadays thanks to that small mod, I really wanted to use my miniATX case :D

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

 

Well then, pity that AM3+ cannot be crammed into mITX, there aren't any such boards. We'd know whom to call :rofl:

The Recon3D is known to have the same audio processor but less dedicated audio circuitry, i.e. they get the audio straight from the audio processor instead of going the way the Creative Z does, which is through quite a lot of filters and a nice DAC. It's been known that the Creative Z is better than the Recon3D, as for your headphones, I know the creative Z does have an special port for headphones which is amplified, so you can put very high ohm drivers in there.

 

Note, the front port does not have the same characteristics as the back ports, the back ports are the ones that provide the most fidelity on audio.

 

Both SB Z and Recon3D support 600 Ohm headphones but I won't be needing them as I use a headphone which is using only 29 Ohm. For this even a Xonar DG which was my other choice works fine as it supports upto 150 Ohm headphones.

 

SB Z is over budget for me. I am getting Xonar DG here for around $ 35 in India and Sound Blaster Z is costing me over $120.

 

Any idea if gaming is my only concern, Xonar DG will do fine?

Both SB Z and Recon3D support 600 Ohm headphones but I won't be needing them as I use a headphone which is using only 29 Ohm. For this even a Xonar DG which was my other choice works fine as it supports upto 150 Ohm headphones.

 

SB Z is over budget for me. I am getting Xonar DG here for around $ 35 in India and Sound Blaster Z is costing me over $120.

 

Any idea if gaming is my only concern, Xonar DG will do fine?

 

I honestly haven't tested any Xonars yet, they say however they have very nice audio circuitry on them, it's a good choice anyway compared to onboard audio.

Well then, pity that AM3+ cannot be crammed into mITX, there aren't any such boards. We'd know whom to call :rofl:

Exactly my thoughts, I was dissapointed when I only could find FM2 motherboards in mini ATX... then again I don't feel that bad considering that I really wanted a dedicated soundcard :P

Finally have my setup/room photo worthy! Spend the whole week re-painting my walls, hanging new shelves and making my own custom desk (With Ikea Galant legs. The frame etc is home-made from wood) ! :D

Workspace-06-09-2013.jpg

This topic is now closed to further replies.
  • Posts

    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know The ONLY thing I need to know is the price, which I know will be way higher than I (and most people) are willing to pay for a phone... so basically nothing here I need to know. PS: Nice job getting that Apple reference to a non-existent and unrevealed product as "competition" in there. Cheque is in the mail.
    • Well I really think the repasting helped if your higher clocks have returned, maybe the next thing to look at is if there is a problem with your case airflow? I guess this because your 3080 has returned to optimal state, but is still staying too warm, which might suggest it was thermal throttling before you repasted, of which the only logical conclusion could be outside factors.
    • Samsung Galaxy Z Fold 8, Flip 8, Z Fold Wide: Everything you need to know by Hamid Ganji Galaxy Z Fold 7 - Image via Samsung The next generation of Samsung foldables is set to be unveiled next month at the second Unpacked event of the year. Samsung’s 2026 foldables are not expected to offer significant upgrades over their predecessors, with the Korean firm instead focusing on design refinements and conventional upgrades such as faster processors and better cameras. However, Samsung is reportedly planning to unveil an all-new passport-style foldable this year to rival Apple’s first foldable iPhone, which is expected to debut this September. Here’s a roundup of everything we know about Samsung’s upcoming foldable devices ahead of their official debut. When can we expect Samsung’s new foldables? The Galaxy Z Fold 7 and Z Flip 7 series were unveiled in July, and Samsung is expected to maintain this timeframe in 2026. Based on previous reports from Korean sources, Samsung will hold its Unpacked event on July 22 in London, UK, to pull back the curtain on the Galaxy Z Fold 8 series. The devices are also expected to hit the shelves a few weeks after launch. However, Samsung has yet to announce an official date. A new naming scheme? One of the most interesting changes we might see this year is a new naming scheme for Samsung’s latest foldables. SamMobile reported that since Samsung is expected to unveil three foldables this year, it has adopted a new naming strategy to simplify product identification for customers. Accordingly, the standard Galaxy Z Fold 8 will reportedly be called the Galaxy Z Fold 8 Ultra and will serve as the direct successor to last year’s Galaxy Z Fold 7. The “Ultra” suffix suggests the phone could feature higher-end specifications, such as additional rear camera modules. Samsung’s new passport-style foldable is expected to carry the Galaxy Z Fold 8 name without any suffix. This model is reportedly equipped with two rear cameras. No major changes are expected for the Flip model. Galaxy Z Fold 8 Ultra and Z Flip 8 anticipated specs Rumors over the past few months suggest Samsung is preparing several upgrades for its upcoming foldables, although the devices may continue to rely on larger batteries and faster charging speeds rather than dramatic design changes. The primary focus this year is expected to be the Galaxy Z Fold 8 and its wide-screen design. Galaxy Z Fold 8 Ultra official CAD renders - Image via AndroidHeadlines Here are the anticipated specifications for the Galaxy Z Fold 8 Ultra based on previous leaks: 6.5-inch outer display and 8-inch inner display, 120Hz refresh rate, and 2,600 nits peak brightness Snapdragon 8 Elite Gen 5 processor, paired with 12GB or 16GB of RAM and 256GB, 512GB, or 1TB of storage 4.1mm thickness when unfolded and a weight of 210g 200MP main camera, 50MP ultrawide camera, 10MP or 12MP telephoto camera, 10MP cover camera, and 10MP selfie camera 5,000mAh battery with 45W wired charging Android 17 and One UI 9 As for the Galaxy Z Flip 8, the device is not expected to be a major departure from its predecessor, although it could become slightly slimmer. Expected specifications include: Snapdragon 8 Elite Gen 5 or Exynos 2600 processor 12GB of RAM with 256GB and 512GB storage options 6.9-inch Dynamic AMOLED 2X inner dispaly and 4.1-inch Super AMOLED outer dispaly 50MP main camera, 12MP ultrawide camera, and 10MP selfie camera 4,300mAh battery with 25W wired charging Android 17 and One UI 9 Samsung’s foldables are also expected to launch with Gemini Intelligence, Google’s AI suite for automating tasks in Android ecosystem. Moreover, given current memory and component costs, some Galaxy Z Fold 8 Ultra and Z Flip 8 variants could see a price hike. Galaxy Z Fold 8 adopts a wide-screen design The centerpiece of the upcoming Unpacked event could be the Galaxy Z Fold 8, previously rumored as the Galaxy Z Fold Wide. This model adopts a passport-style form factor and is expected to compete directly with Apple’s iPhone Fold. Galaxy Z Fold 8 official CAD renders - Image via AndroidHeadlines Here’s what to expect: 7.6-inch primary OLED display and 5.4-inch cover display, 120Hz refresh rate, 2,600 nits peak brightness, and 4:3 aspect ratio Snapdragon 8 Elite Gen 5 processor, 12GB or 16GB of RAM, and 256GB, 512GB, or 1TB storage options 4,800mAh battery with 45W wired charging 50MP main camera, 50MP ultrawide camera, and 10MP selfie camera Android 17 and One UI 9 The three new foldable phones are unlikely to be the only devices unveiled at Samsung’s Unpacked event. The company is also expected to introduce the Galaxy Watch Ultra 2 and the Galaxy Watch 9 series.
    • Thanks
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!