Show us your Workstations! - 2013 Edition


Recommended Posts

While your cpu may be cool, how are your other hardware, HDDs, GFX? That is not well managed.

Not reaching above 49 degress. Plus I have an SDD, under load, my HDD reaches 49 degrees. remember that all the 6 fans are doing their work.

 

Edit: Note that my only HDD is a 2.5" one, I have seen those things reach 56 degress... here it's not the case.

 

Edit 2: My GPU, even overclocked, reaches a maximum of 69 degrees. Hell man, you just can imagine a system this small and be perfectly cooled, have you ever tried to overclock a laptop? I did, a quad core from 1.6 GHz to 3.0 Ghz, that thing could even emulate PS2 games. maximum temps were quite high (89?) yet never failed and I still use it as a my laptop, just not anymore for gaming. A desktop of such dimensions is... I don't know, A giant leap of space and ventilation for me.

May be cool enough, but it's far away from neat. Get some cable ties.

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

dg0j.jpg

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

The problem with that case is poor design. From the pictures I see, there is no area behind the motherboard to hide cables. It looks like a very cramped case in general, and not ideal at all for air flow. 

 

P.S. that flow diagram screams OCD ;) Not saying that's a bad thing. It's good that you put a lot of though into it! 

You just have OCD. (No insult intended, I also have it but for other things...)

 

Here is a flow diagram for you:

 

I invite you to replicate the same system with a zalman T2, then if you can do better.... show me :D, I'm happy with my temps.

 

I know the way fans blow. Top and back fans exhaust, front fans blow in.

The problem with that case is poor design. From the pictures I see, there is no area behind the motherboard to hide cables. It looks like a very cramped case in general, and not ideal at all for air flow. 

 

P.S. that flow diagram screams OCD ;) Not saying that's a bad thing. It's good that you put a lot of though into it! 

 It actually is very efficient with temps, therefore airflow must be excellent considering my components.

 

The sound card in question, creative z OEM version and the GPU:

 

yon9.jpg

 

 

 

I am looking to buy the same sound card. How is it compared to onboard Realtek audio in games? Does Audio positioning still works in games now that EAX etc is no longer supported.

 

Also, does the card have connector for front panel HD Audio?

that's pretty good temps for gaming

 

Thanks! I wanted to prove that you don't need a giant case to obtain the optimal cooling on components like mine, including putting a FX8350 processor on a microATX board*

 

I am looking to buy the same sound card. How is it compared to onboard Realtek audio in games? Does Audio positioning still works in games now that EAX etc is no longer supported.

 

Also, does the card have connector for front panel HD Audio?

 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

 

@Arceles: in our, a bunch of neatfreaks, last chance to catch you red-handed - what are ambient temperatures of your room and do you have AC in the house? :p

I don't have AC and I currently live in UK, Sheffield, those temps were from yesterday with closed windows. Temperature was around 27?C** on my room... no, I don't have AC since I'm an student living on a cheap but nice house :D

 

Edit: You can really fell how the moment the processor get's used the case sucks away the hot air, you just have to put the and above it and both top fans let you feel wamness... which I must say, I'm quite impressed since the 120mm 12.5mm depth fan it's the most obstructed one, yet it really get's hot air from somewhere and pulls it out even with the whole bluray drive below it.

 

*I undervolted my processor at stock speeds, applied heatsinks to VRMs and put a fan over them, otherwise throttling was present. I suffer no throttling nowadays thanks to that small mod, I really wanted to use my miniATX case :D

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

Thanks! I wanted to prove that you don't need a giant case to obtain the optimal cooling on components like mine, including putting a FX8350 processor on a microATX board*

 

 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

 

 

The only thing that makes Realtek onboard audio redeeming is the custom audio software i.e SB cinama or the razer surround otherwise the stock realtek software is just horrid. I also have and external sb x-fi go usb sound card is much better with compared to the Realtek onboard audio. Although, it's not as high-end as your sb sound card but I'm able to adjust the sound settings to match my listening preferences. The usb one has the thx and eax just like the pci-e counterpart, but i'm sure the pci-e counterpart has more added audio feature that the usb one doesn't have 

Realtek.... is pretty much bad for my tastes, any kind of onboard audio no matter how premium it is. This card is at the moment the best price/quality ratio and it simply rocks in quality and SNR. The only EAX game that I've tested is Mcgee's Alice, I set the EAX option and it worked just fine under windows 7, haven't tested on 8 but all my modern games are on 8 and no problem whatsoever. Yes, it does have front panel audio, it's the HDA FP in the upper left of the card, all those pins in there.

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

 

I checked some videos on YouTube comparing the Audio quality and positioning in games and found Creative to be very wide and better. Xonar was good but Creative was audibly better.

 

Your card looks like an OEM version due to lack of the EMI shield. Which Speaker or headset do you use with these?

The only thing that makes Realtek onboard audio redeeming is the custom audio software i.e SB cinama or the razer surround otherwise the stock realtek software is just horrid. I also have and external sb x-fi go usb sound card is much better with compared to the Realtek onboard audio. Although, it's not as high-end as your sb sound card but I'm able to adjust the sound settings to match my listening preferences. The usb one has the thx and eax just like the pci-e counterpart, but i'm sure the pci-e counterpart has more added audio feature that the usb one doesn't have 

 

I won't be going for a USB device as I have all PCIe slots free in my motherboard. Besides, I want to buy ones and use for many years to come.

 

I was checking difference between Recon3D and Sound Blaster Z. There isn't much difference other then SNR. Recon3D has 106 db while Sound Blaster Z has 116. How much will this affect audio quality if all I am using is either In-ear monitors like Razer Hammerhead or a 5.1 channel headset? Any idea?

I checked some videos on YouTube comparing the Audio quality and positioning in games and found Creative to be very wide and better. Xonar was good but Creative was audibly better.

 

Your card looks like an OEM version due to lack of the EMI shield. Which Speaker or headset do you use with these?

 

I.... have a very weird setup :D, first I connect with a QED cable from the back port of the sound card to a sony car stereo CDX-GT350MP, Then it goes to a pair of speakers JBL GTO328, and to an active subwoofer Logitech S220 through an auxiliary out port of the car stereo, the idea of this is to have my very own configuration of bass/middle and treeble. The sound quality is excellent but you have to ve carefull about ground loops since a configuration like this is very prone to them, I in fact have to connect the ground port of the car stereo to the chasis of my PC to eliminate any hum that there is on audio.

 

I won't be going for a USB device as I have all PCIe slots free in my motherboard. Besides, I want to buy ones and use for many years to come.

 

I was checking difference between Recon3D and Sound Blaster Z. There isn't much difference other then SNR. Recon3D has 106 db while Sound Blaster Z has 116. How much will this affect audio quality if all I am using is either In-ear monitors like Razer Hammerhead or a 5.1 channel headset? Any idea?

The Recon3D is known to have the same audio processor but less dedicated audio circuitry, i.e. they get the audio straight from the audio processor instead of going the way the Creative Z does, which is through quite a lot of filters and a nice DAC. It's been known that the Creative Z is better than the Recon3D, as for your headphones, I know the creative Z does have an special port for headphones which is amplified, so you can put very high ohm drivers in there.

 

Note, the front port does not have the same characteristics as the back ports, the back ports are the ones that provide the most fidelity on audio.

I don't have AC and I currently live in UK, Sheffield, those temps were from yesterday with closed windows. Temperature was around 27?C** on my room... no, I don't have AC since I'm an student living on a cheap but nice house :D

 

Edit: You can really fell how the moment the processor get's used the case sucks away the hot air, you just have to put the and above it and both top fans let you feel wamness... which I must say, I'm quite impressed since the 120mm 12.5mm depth fan it's the most obstructed one, yet it really get's hot air from somewhere and pulls it out even with the whole bluray drive below it.

 

*I undervolted my processor at stock speeds, applied heatsinks to VRMs and put a fan over them, otherwise throttling was present. I suffer no throttling nowadays thanks to that small mod, I really wanted to use my miniATX case :D

**Due the fact I also closed the door on my room... the case is very good at throwing away the heat, hence the temp.

 

Well then, pity that AM3+ cannot be crammed into mITX, there aren't any such boards. We'd know whom to call :rofl:

The Recon3D is known to have the same audio processor but less dedicated audio circuitry, i.e. they get the audio straight from the audio processor instead of going the way the Creative Z does, which is through quite a lot of filters and a nice DAC. It's been known that the Creative Z is better than the Recon3D, as for your headphones, I know the creative Z does have an special port for headphones which is amplified, so you can put very high ohm drivers in there.

 

Note, the front port does not have the same characteristics as the back ports, the back ports are the ones that provide the most fidelity on audio.

 

Both SB Z and Recon3D support 600 Ohm headphones but I won't be needing them as I use a headphone which is using only 29 Ohm. For this even a Xonar DG which was my other choice works fine as it supports upto 150 Ohm headphones.

 

SB Z is over budget for me. I am getting Xonar DG here for around $ 35 in India and Sound Blaster Z is costing me over $120.

 

Any idea if gaming is my only concern, Xonar DG will do fine?

Both SB Z and Recon3D support 600 Ohm headphones but I won't be needing them as I use a headphone which is using only 29 Ohm. For this even a Xonar DG which was my other choice works fine as it supports upto 150 Ohm headphones.

 

SB Z is over budget for me. I am getting Xonar DG here for around $ 35 in India and Sound Blaster Z is costing me over $120.

 

Any idea if gaming is my only concern, Xonar DG will do fine?

 

I honestly haven't tested any Xonars yet, they say however they have very nice audio circuitry on them, it's a good choice anyway compared to onboard audio.

Well then, pity that AM3+ cannot be crammed into mITX, there aren't any such boards. We'd know whom to call :rofl:

Exactly my thoughts, I was dissapointed when I only could find FM2 motherboards in mini ATX... then again I don't feel that bad considering that I really wanted a dedicated soundcard :P

Finally have my setup/room photo worthy! Spend the whole week re-painting my walls, hanging new shelves and making my own custom desk (With Ikea Galant legs. The frame etc is home-made from wood) ! :D

Workspace-06-09-2013.jpg

This topic is now closed to further replies.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!