15 Free File Copy Tools Tested, poor Windows 8 performance


Recommended Posts

15 Free File Copy Tools Tested for the Fastest Transfer Speeds

Most of us know that it is possible to copy or move files and folders in Windows by either using your mouse to copy and paste, drag and drop or by using the keyboard. Obviously the single biggest factor affecting the speed of any transfer is what you?re copying from or to such as hard drives, SSD?s, USB sticks, network etc. Another factor is how Windows itself deals with these operations, and all versions of Windows have never been quite as efficient at it as they could be.

With this in mind, it is entirely possible to shorten the duration of any copying or moving of files if you use a piece of third party software to take over operations instead of relying on the Windows built-in function. Not only can this help the speed of transfers, but you can also get other benefits like better information, queuing copies, pausing, skipping, and dealing with problem files far better than what Windows does.

We were curious to find out just how fast some of these programs actually are when copying and moving files around in Windows, so have gathered together 15 freeware tools to have a closer look. A few simple tests were carried out to try and determine which file copying tools are the fastest at performing file transfers in a few different real world scenarios. To try and cover some common file copy operations, 3 tests were conducted;

Test 1: Copies a number of small to medium files from one HDD to another.

4GB totaling 24,185 files / 6193 folders with sizes of a few bytes to 320MB.

Test 2: Copy 2 large files using the same source and destination as test 1.

2x Windows 8 ISO?s (x86 and x64) totaling 5.8GB.

Test 3: Copy over a 10/100 LAN network to the same destination as tests 1 and 2.

450MB totaling 5665 files / 723 folders with sizes of a few bytes to 320MB.

The source drive was a 10,000 RPM WD Raptor and the destination was a standard 7200 RPM SATA drive, both defragged. All the 3rd party software was run using their default transfer settings on Windows 7 64-bit. Each test was run twice and an average of the times was taken.

Full test:

http://www.raymond.cc/blog/12-file-copy-software-tested-for-fastest-transfer-speed/

Interesting and useful article, with one surprising result concerning Windows 8.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

That doesn't mean their isn't value in looking into alternatives. Explorer has never been the fastest method of copying files.

windows 8 beats windows 7 hands down in transfeers, its much much faster

And the ability to pause different transfers, something I loved about Ubuntu, is pretty neat.

  • Like 2

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

I'm quite happy with Windows 7 transfer speed. I move stuff around constantly, usually fairly big downloads, on a regular basis..

Mere seconds to throw half a dozen CDs or more from one drive to another, which I do many times a day,

or half a minute or so for around 25 gigs of vids, so I can't complain.

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

Oh good grief....

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

That's why I check before starting any file transfers.

Oh goodness. I would never use a third party file copy utility for any claimed improvement on speed. I might use one for features (I use TeraCopy when copying large files to my external, since I can make it do checksum verification).

File copying is a simple operation bottlenecked by hardware. I don't know how you could make it any simpler or faster without compromising some integrity check.

Before this turns into a debate on why anyone would need a third party app fo copying i prefer terracopy have been using it for a few years now always seems to copy faster imo and has more options than the default windows copy which for me is a win win situation.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Not the case. Initially Vista's poor performance in movement of data, both on local disk drives and across a network was one of it's most heavily publicised failings, and despite the fact that it was largely fixed in service packs, the image of Vista never truly recovered from that. Performance does matter to people and if 8 is slower for no good reason people will pick up on it. Personally, having had to go back to 7 because of blue screens on 8 I didn't get enough time to truly test it but the general image that I got was that 8 just feels like it has some polish missing.

The only reason I would use a 3rd party app is if I needed a log of successful/unsuccessful transfers, which explorer don't do. I find FTP to be very efficient in this regard, and also great at resuming.

As for the article, I would like to know what hardware it was carried out on, besides a terrible WD 10k RPM drive which when I owned one had same spec as my seagate 7200RPM drive (aside from a touch better random seek).

I have a feeling that an XP-designed machine had better written drivers for the hardware than Windows 8 install did.

My real life example should you care: I upgraded from Windows 7 to windows 8, and both were installed on my SSD, it was a literal upgrade from 7, keeping everything in-tact (yay it worked seamlessly!).

In windows 7 I could transfer files from my network around 30MB/s and write around 30-35MB/s from the SSD. With windows 8 I am hitting well over 60MB/s read and 45-50MB/s write to the exact same drive on the exact same system using all the same cabling from the exact same network source... This wasn't a one-time trial, this is average out over a few years of 7 use and months of 8 use.

I've found teracopy to do a much better job than the win7 copy more often than not it spends an age guessing how long it'll take to copy a file before it even starts copying teracopy on the other hand has no such failings I did try extremecopy pro but found when copying large files over the network it would fail halfway through

I might think windows 8 is a steaming pile but it's pretty clear that the testing is heavily flawed when they said this regarding the slower results for windows 8 "This is explained to a large degree by the Security Essentials antivirus part of Windows Defender scanning every file and slowing everything down"

If you are measuring the performance of multiple operating systems to do the same operation you would naturally want them to be operating as similar to one another as possible, if there's no anti-virus running on 7 and XP then defender should have been disabled for 8.

Windows 8 is faster when copying and pasting files for me than Windows 7 or teracopy ever was.

It's especially faster when copying multiple large files. And you can pause in Windows 8 now too. No need for third party software and certainly no need to read some half-assed test that is fundamentally flawed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
  • Recent Achievements

    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!