15 Free File Copy Tools Tested, poor Windows 8 performance


Recommended Posts

15 Free File Copy Tools Tested for the Fastest Transfer Speeds

Most of us know that it is possible to copy or move files and folders in Windows by either using your mouse to copy and paste, drag and drop or by using the keyboard. Obviously the single biggest factor affecting the speed of any transfer is what you?re copying from or to such as hard drives, SSD?s, USB sticks, network etc. Another factor is how Windows itself deals with these operations, and all versions of Windows have never been quite as efficient at it as they could be.

With this in mind, it is entirely possible to shorten the duration of any copying or moving of files if you use a piece of third party software to take over operations instead of relying on the Windows built-in function. Not only can this help the speed of transfers, but you can also get other benefits like better information, queuing copies, pausing, skipping, and dealing with problem files far better than what Windows does.

We were curious to find out just how fast some of these programs actually are when copying and moving files around in Windows, so have gathered together 15 freeware tools to have a closer look. A few simple tests were carried out to try and determine which file copying tools are the fastest at performing file transfers in a few different real world scenarios. To try and cover some common file copy operations, 3 tests were conducted;

Test 1: Copies a number of small to medium files from one HDD to another.

4GB totaling 24,185 files / 6193 folders with sizes of a few bytes to 320MB.

Test 2: Copy 2 large files using the same source and destination as test 1.

2x Windows 8 ISO?s (x86 and x64) totaling 5.8GB.

Test 3: Copy over a 10/100 LAN network to the same destination as tests 1 and 2.

450MB totaling 5665 files / 723 folders with sizes of a few bytes to 320MB.

The source drive was a 10,000 RPM WD Raptor and the destination was a standard 7200 RPM SATA drive, both defragged. All the 3rd party software was run using their default transfer settings on Windows 7 64-bit. Each test was run twice and an average of the times was taken.

Full test:

http://www.raymond.cc/blog/12-file-copy-software-tested-for-fastest-transfer-speed/

Interesting and useful article, with one surprising result concerning Windows 8.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

That doesn't mean their isn't value in looking into alternatives. Explorer has never been the fastest method of copying files.

windows 8 beats windows 7 hands down in transfeers, its much much faster

And the ability to pause different transfers, something I loved about Ubuntu, is pretty neat.

  • Like 2

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

I'm quite happy with Windows 7 transfer speed. I move stuff around constantly, usually fairly big downloads, on a regular basis..

Mere seconds to throw half a dozen CDs or more from one drive to another, which I do many times a day,

or half a minute or so for around 25 gigs of vids, so I can't complain.

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

Oh good grief....

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

That's why I check before starting any file transfers.

Oh goodness. I would never use a third party file copy utility for any claimed improvement on speed. I might use one for features (I use TeraCopy when copying large files to my external, since I can make it do checksum verification).

File copying is a simple operation bottlenecked by hardware. I don't know how you could make it any simpler or faster without compromising some integrity check.

Before this turns into a debate on why anyone would need a third party app fo copying i prefer terracopy have been using it for a few years now always seems to copy faster imo and has more options than the default windows copy which for me is a win win situation.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Not the case. Initially Vista's poor performance in movement of data, both on local disk drives and across a network was one of it's most heavily publicised failings, and despite the fact that it was largely fixed in service packs, the image of Vista never truly recovered from that. Performance does matter to people and if 8 is slower for no good reason people will pick up on it. Personally, having had to go back to 7 because of blue screens on 8 I didn't get enough time to truly test it but the general image that I got was that 8 just feels like it has some polish missing.

The only reason I would use a 3rd party app is if I needed a log of successful/unsuccessful transfers, which explorer don't do. I find FTP to be very efficient in this regard, and also great at resuming.

As for the article, I would like to know what hardware it was carried out on, besides a terrible WD 10k RPM drive which when I owned one had same spec as my seagate 7200RPM drive (aside from a touch better random seek).

I have a feeling that an XP-designed machine had better written drivers for the hardware than Windows 8 install did.

My real life example should you care: I upgraded from Windows 7 to windows 8, and both were installed on my SSD, it was a literal upgrade from 7, keeping everything in-tact (yay it worked seamlessly!).

In windows 7 I could transfer files from my network around 30MB/s and write around 30-35MB/s from the SSD. With windows 8 I am hitting well over 60MB/s read and 45-50MB/s write to the exact same drive on the exact same system using all the same cabling from the exact same network source... This wasn't a one-time trial, this is average out over a few years of 7 use and months of 8 use.

I've found teracopy to do a much better job than the win7 copy more often than not it spends an age guessing how long it'll take to copy a file before it even starts copying teracopy on the other hand has no such failings I did try extremecopy pro but found when copying large files over the network it would fail halfway through

I might think windows 8 is a steaming pile but it's pretty clear that the testing is heavily flawed when they said this regarding the slower results for windows 8 "This is explained to a large degree by the Security Essentials antivirus part of Windows Defender scanning every file and slowing everything down"

If you are measuring the performance of multiple operating systems to do the same operation you would naturally want them to be operating as similar to one another as possible, if there's no anti-virus running on 7 and XP then defender should have been disabled for 8.

Windows 8 is faster when copying and pasting files for me than Windows 7 or teracopy ever was.

It's especially faster when copying multiple large files. And you can pause in Windows 8 now too. No need for third party software and certainly no need to read some half-assed test that is fundamentally flawed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!