Ubuntu 12.04 Unity 2D Stuck Issue


Recommended Posts

Well alright.

So what about my problem, all the steps I just followed has solved nothing?

Am I once again out of luck and must re-install? If I were to do that, how do I install the open-source drivers with all things needed?

I don't really want to do that again, quite annoying.

Since the proprietary AMD graphics driver is difficult to get rid of once you installed it outside of the repository, a reinstall is the easiest way to fix your problem. The open-source radeon driver is built into the Linux kernel; it will be installed by default. However, you still may not get accelerated graphics without installing a few support libraries. The basic procedure is below.

1) Install Ubuntu 12.04 or 12.10.

2) Add the additional Ubuntu repositories.


sudo apt-add-repository universe
sudo apt-add-repository multiverse
sudo apt-get update
[/CODE]

[b]3)[/b] Update Ubuntu and install the additional packages necessary for full acceleration with the [i]radeon[/i] driver.

[CODE]
sudo apt-get dist-upgrade
sudo apt-get install libgl1-mesa-dri-experimental libgl1-mesa-glx linux-firmware-nonfree xserver-xorg-video-radeon
[/CODE]

[b]4)[/b] Reboot.

[CODE]
sudo reboot
[/CODE]

[b]5)[/b] Check that you are using the proper driver and have full 3D acceleration.

[CODE]
sudo lshw -c video | awk '{if($1 ~ "^configuration") print $2}'
glxinfo | grep renderer
[/CODE]

  • Like 1

And you think that will solve my weird problem? Cause it's not really worth my time doing a fresh install if it's just going to happen again.

Of course, I don't really have any more options. lol

I think my proposed solution will solve your problem. And so long as you avoid installing software outside of the repository, you shouldn't have any more problems of this magnitude. Installing, removing, and updating software using the repository is drastically simpler anyway.

As I have already said, the radeon driver is generally MUCH more stable than fglrx. In fact, AMD has been providing specs and assistance to the Radeon Project for a few years now, which has dramatically increased the speed of development and featureset of the driver. AMD is planning to phase out fglrx in favour of radeon, although they have not set a specific date for that transition to complete yet. Not only is radeon very featureful and usable, but it is much more stable than fglrx because it can do things the kosher way (unlike fglrx) since it is entirely GPL'd code.

  • Like 1

Ok, so I need to learn.

When you say repository, what exactly do you mean?

There are 3 ways I have been installing programs, I either download a file from the programs website (.run or .deb) and install it.

I go to the Ubuntu Software Centre and install something.

Or I add a PPA and run commands in terminal to install something.

Installing something from the repository means downloading it from the Ubuntu Software Center (or other APT utilities such as apt-get, aptitude, or synaptic). If you add a PPA or other repository, such as Medibuntu, the packages can be installed with your favorite package management utility (often apt-get, although it could be others) just like packages included in Ubuntu by default, and is considered installed from the repository.

Downloading deb files directly from the Internet and installing them using dpkg, gdebi, or the Ubuntu Software Center (default in Ubuntu) is still installing the packages using APT, but not from the repository. You still get some of the benefits of APT, such as automatic dependency resolution, but not others, such as automatic updates or reasonable assurance that the package's dependencies can be satisfied and the software will work well with your system. However, since APT knows about the package, it will likely make it through distribution upgrades and will be easy to remove at some point in the future, if necessary.

Downloading run files (or any other form of Linux binary) from the Internet should almost always be avoided. Since APT doesn't know this software exists, you will need to install the dependencies yourself (which is often documented in the README that comes with the binary), and you are responsible for making sure you keep the software up-to-date and its dependencies remain installed through distribution upgrades. The recommend way to handle software that must be installed this way is to install it to /opt so that it is easier to manually manage and remove.

For example, I have MATLAB (a piece of technical software often used by engineers for intensive mathematical computations and simulations) installed on my system in /opt/MATLAB/R2008b (I know I have an older version, its expensive!). I then created a launcher (/opt/MATLAB/R2008b/matlab.desktop) and soft-linked it to /usr/share/applications/matlab.desktop so that it is displayed properly in my menu. Not only can I easily tell that I have MATLAB installed outside of the repository by listing the contents of /opt, I can also remove it easily by deleting just one directory and one file: /opt/MATLAB and /usr/share/applications/matlab.desktop. However, that installation method is the exception not the rule. Use it as a last resort.

The order of preference for package installation should be repository > deb file > binary installer.

Disclaimer: I made some generalizations to keep the explanation as simple as possible. However, my explanations are valid in almost every case; there are merely some technicalities that I didn't cover for the sake of brevity.

Thanks man, that's awesome information.

Though I am going to assume those generalizations is going to explain my next question, you said a downside of .deb files is there are no automatic updates. Though that is how I install Chrome, but it does get automatic updates.

Chrome is actually a special case. The deb has a post-install trigger that checks for the presence of Google's Chrome repository on your computer. If its not found, the repository will be added for you automatically so that you will continue to get updates. Although this is a very elegant solution for third-party software, most packages do not do this because it requires infrastructure to run a separate repository for that package alone. Instead, the authors assume that their package is already included in a repository or that you will keep up-to-date with new version manually. Dropbox is another example of another piece of software whose deb transparently adds a repository. VirtualBox is an example of one that does not (although they do have a repository that you can add manually, including explicit instructions for how to do so on their website).

I think Mindovermaster's last comment was intended to be sarcastic. That's why that emoticon is at the end. Its often really difficult to convey sarcasm on the Internet, though. I understand. In person, people often consider me very sarcastic. Not that there's ANY reason for that, OF COURSE!

Since the proprietary AMD graphics driver is difficult to get rid of once you installed it outside of the repository, a reinstall is the easiest way to fix your problem. The open-source radeon driver is built into the Linux kernel; it will be installed by default. However, you still may not get accelerated graphics without installing a few support libraries. The basic procedure is below.

1) Install Ubuntu 12.04 or 12.10.

2) Add the additional Ubuntu repositories.


sudo apt-add-repository universe
sudo apt-add-repository multiverse
sudo apt-get update
[/CODE]

[b]3)[/b] Update Ubuntu and install the additional packages necessary for full acceleration with the [i]radeon[/i] driver.

[CODE]
sudo apt-get dist-upgrade
sudo apt-get install libgl1-mesa-dri-experimental libgl1-mesa-glx linux-firmware-nonfree xserver-xorg-video-radeon
[/CODE]

[b]4)[/b] Reboot.

[CODE]
sudo reboot
[/CODE]

[b]5)[/b] Check that you are using the proper driver and have full 3D acceleration.

[CODE]
sudo lshw -c video | awk '{if($1 ~ "^configuration") print $2}'
glxinfo | grep renderer
[/CODE]

I just entered

sudo apt-add-repository universe

and it gives me Error: universe invalid?

**I just checked out the Software Sources area, and seems like both are already enabled.

  • 5 weeks later...

I am having issue running any games at all, even on low settings.

OpenGL renderer string: Gallium 0.4 on AMD CYPRESS is what I get with glxinfo | grep renderer.

Is that correct? What is needed?

That is the correct string for the radeon OpenGL renderer. If you are running Unity (or Compiz in general), make sure that "Undirect Fullscreen Windows" is checked to get the best performance in full-screen games. (Although the feature was introduced in Ubuntu 12.10, it has been backported to Ubuntu 12.04.2 - its just not default in 12.04.)

Unfortunately the 3D performance of Radeon and Nouveau is not quite up-to-par. Their 2D performance is fantastic, but the drivers are not well optimized at the moment. The Intel graphics driver is much better optimized, but the hardware performance is lacking. I'm hoping that the open-source driver AMD recently released for the Radeon HD 8000 series is a game changer when the hardware arrives!

That said, I am able to run Nexuiz, Minecraft, and Team Fortress 2 acceptably on my Radeon HD 5770 using Radeon and Gallium 0.4.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If someone chooses to continue using SB and therefore goes through the manual intervention in the thread, afterwards the BSOD problem is gone. Whether they then re-enable the task doesn't matter, they're done, though on such machines it might pay to keep it disabled in case the next update (if there is a next) causes the same problem. OTOH, if someone disables SB in the BIOS, the problem is also gone. Incidentally, I noticed that this task exists even on machines that don't support SB. It's just installed across the board...and runs. Doing what on such machines is a little hazy.
    • qBittorrent 5.2.2 by Razvan Serea The qBittorrent project aims to provide a Free Software alternative to µtorrent. qBittorrent is an advanced and multi-platform BitTorrent client with a nice user interface as well as a Web UI for remote control and an integrated search engine. qBittorrent aims to meet the needs of most users while using as little CPU and memory as possible. qBittorrent is a truly Open Source project, and as such, anyone can and should contribute to it. qBittorrent features: Polished µTorrent-like User Interface Well-integrated and extensible Search Engine Simultaneous search in most famous BitTorrent search sites Per-category-specific search requests (e.g. Books, Music, Movies) All Bittorrent extensions DHT, Peer Exchange, Full encryption, Magnet/BitComet URIs, ... Remote control through a Web user interface Nearly identical to the regular UI, all in Ajax Advanced control over trackers, peers and torrents Torrents queueing and prioritizing Torrent content selection and prioritizing UPnP / NAT-PMP port forwarding support Available in ~25 languages (Unicode support) Torrent creation tool Advanced RSS support with download filters (inc. regex) Bandwidth scheduler IP Filtering (eMule and PeerGuardian compatible) IPv6 compliant Available on most platforms: Linux, Mac OS X, Windows, OS/2, FreeBSD qBittorrent 5.2.2 changelog: FEATURE: Use D-Bus to show file in file managers (Chocobo1) #24340 BUGFIX: Fix friendlyUnitCompact precision calculation (vafada) #24323 BUGFIX: Remove all top-level folders (glassez) #24333 BUGFIX: Use proper API for checking exit status (Chocobo1) #24349 BUGFIX: Delete stale lockfile when hostname mismatch (TurboTheTurtle, glassez) #24363 BUGFIX: Fix wrong removal procedure of watched folder paths (Chocobo1) #24413 BUGFIX: Don't reannounce before interface changes are applied (glassez) #24447 BUGFIX: Use Latin script for Bosnian locale name (Andy Ye) #24342 WEBUI: Fix performance of global checkbox toggling (tehcneko) #24316 WEBUI: Fix Safari transfer list header misalignment (Piccirello) #24377 WEBUI: Fix error when submitting magnet before metadata loads (Piccirello) #24378 WEBUI: Use correct row id when updating Rss Downloader feed selection (Chocobo1) #24402 WEBUI: Use SameSite=Lax for session cookie to fix cross-site login (Piccirello) #24422 WEBUI: Bring back properties panel expand/collapse button (vafada) #24430 WEBAPI: Only use X-Forwarded-Host header when reverse proxy support is enabled (Chocobo1) #24457 RSSS: Fix "RSS Smart Episode Filter" RegEx (nathanon-akk, glassez) #24398 RSS: Fix previously matched episode format (glassez) #24452 WINDOWS: Fix Python fallback search path (TurboTheTurtle) #24325 WINDOWS: NSIS: Allow to install x64 binary on ARM64 (Chocobo1) #24358 Download: qBittorrent 5.2.2 | 41.1 MB (Open Source) Download: qBittorrent 64-bit installer (qt6) | 43.6 MB Links: qBittorrent Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Weechat. https://weechat.org/
    • they should stop making bad games that no one asked for
  • Recent Achievements

    • Veteran
      branfont went up a rank
      Veteran
    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      485
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      126
    4. 4
      Steven P.
      87
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!