Nintendo 64 on LCD


Recommended Posts

Google isn't being much help at all with this one. I'm finding threads on forums that are full of users saying it's the cables, get an old TV etc.

I have a N64, and I want it to work on my LCD HDTV. If I have to buy something to convert the signal, I really don't care.

I know this console works, I know the cables are fine, I know the games are fine. This is a signal issue with the TV.

Can canyone tell me what I should go and buy to get this to work.

I have AV cables (red, white, yellow). I've tried them in the AV ports, and in Composite ports (plugged in correctly).

Any help would be appreciated.

Link to comment
https://www.neowin.net/forum/topic/1134382-nintendo-64-on-lcd/
Share on other sites

You will probably need a down converter, if they exist. Don't forget, the large majority of games run at 320x240 which a lot of newer TVs don't support for some reason. Do you have an expansion pak and a game which supports 640x480, such as Perfect Dark or Star Wars Episode 1 Racer? This might be a good way to try it out.

Either way.... have fun with your N64... I tried mine on my 42" HDTV for the first time a few weeks ago and I almost cried at how bad it looked. I had all upscaling features turned on on my TV and it just didn't work one bit - it was horrendous to look at. I hate to say it, but you're better off getting a cheap tablet of some kind which runs N64 emulators well and connecting that by HDMI... :(

You will probably need a down converter, if they exist. Don't forget, the large majority of games run at 320x240 which a lot of newer TVs don't support for some reason. Do you have an expansion pak and a game which supports 640x480, such as Perfect Dark or Star Wars Episode 1 Racer? This might be a good way to try it out.

Either way.... have fun with your N64... I tried mine on my 42" HDTV for the first time a few weeks ago and I almost cried at how bad it looked. I had all upscaling features turned on on my TV and it just didn't work one bit - it was horrendous to look at. I hate to say it, but you're better off getting a cheap tablet of some kind which runs N64 emulators well and connecting that by HDMI... :(

the games resolution was 320x240, but the output resolution was standard NTSC or PAL resolution when it went out via Composite video

Got a new cable and it's working. But it's on and off, really annoying.

Welcome to old N64s. i strongly recommend not blowing into the cartridges or the cartridge slot as we used to do as kids - as it turns out, all it does is just leave tiny bits of spit on the connectors and ends up rusting them :p

Do you have a PAL N64? I live in the UK and have a PAL N64, and bought a cheap AV (Red/White/Yellow) cable from ebay, and the colours were all messed up and had a massive white glare problem, turns out the PAL N64 is slightly different and these generic cables dont work well. You need one thats been especially made or altered for PAL. Not sure if this is your problem but definitly worth considering.

well... i have a 47" LED tv and the N64 simple sucks at it... the image is so streched that the fonts are barely readable... the best result I find (w/o conversos, just the colored cables) was to plug it into a 32" tv.. the image is still bad, but is a LOT better and at least readable.. i also own a 29" CRT tv which i use with the N64, but please let me know if you get some better results!

well... i have a 47" LED tv and the N64 simple sucks at it... the image is so streched that the fonts are barely readable... the best result I find (w/o conversos, just the colored cables) was to plug it into a 32" tv.. the image is still bad, but is a LOT better and at least readable.. i also own a 29" CRT tv which i use with the N64, but please let me know if you get some better results!

Can't you set your TV Input for that to be 4:3?

I'm running my SNES on a 59" Samsung Plasma, and it looks great with he standard RCA cables.

Welcome to old N64s. i strongly recommend not blowing into the cartridges or the cartridge slot as we used to do as kids - as it turns out, all it does is just leave tiny bits of spit on the connectors and ends up rusting them :p

A trick I found was just to plug and unplug the cartridge several times before switching the unit on. By doing this, you're basically scraping off the oxidized layer from the cartridge's PCB tracks, and perhaps even the connector inside the 64 - shiny surfaces will usually always become oxidized (except for gold I think). I sometimes had to do it 20-30 times (while the unit was off of course) - but it always seemed to work.

Forget blowing - it won't help a cartridge that hasn't been used for 10 years. You're probably going to make the oxidization worse.

A blank screen ("No Signal") could most likely be the sign of the cartridge not being read correctly - try my steps above. The AV part of it should be fine. The 64 will not output a signal unless the cartridge can be accessed properly.

Have a look at the cartridge contacts - if they're as dull as a well-used $1 or $2 coin, then they're most likely heavily oxidized. When the cartridge was new, they would have been shiny.

A trick I found was just to plug and unplug the cartridge several times before switching the unit on. By doing this, you're basically scraping off the oxidized layer from the cartridge's PCB tracks, and perhaps even the connector inside the 64 - shiny surfaces will usually always become oxidized (except for gold I think). I sometimes had to do it 20-30 times (while the unit was off of course) - but it always seemed to work.

Forget blowing - it won't help a cartridge that hasn't been used for 10 years. You're probably going to make the oxidization worse.

Yep, you're bang on. It's also a part luck thing too, hoping to get a good enough connection for the game to work :p

A trick I found was just to plug and unplug the cartridge several times before switching the unit on. By doing this, you're basically scraping off the oxidized layer from the cartridge's PCB tracks, and perhaps even the connector inside the 64 - shiny surfaces will usually always become oxidized (except for gold I think). I sometimes had to do it 20-30 times (while the unit was off of course) - but it always seemed to work.

Forget blowing - it won't help a cartridge that hasn't been used for 10 years. You're probably going to make the oxidization worse.

Q-Tips n' clear rubbing alcohol always worked for me. If that doesn't work, Dremel and a light buffing pad will shine the gold contacts right up. Don't over do it though! You'll need the special bit to open up the cartridges and as with all electronics, beware of static!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • >defenders of AI-generated artworks often claim that AI is just a tool It is not. It is the inhuman artist replacement. The human writing the prompt is the employer/manager requesting the work product of the artist -- a supervisory/descriptive job that doesn't carry with it any rights to the copyright of that work product at all. And since AI is not human itself, it can't gain copyright for anything it is asked to regurgitate or hallucinate, so it can't transfer that copyright to the employer/manager/human who asked for the output. This was all legally reaffirmed last year. So, no, while there are AI tools, AI slopware generation is NOT a "tool" in the legal definition of that word.
    • As long as i get to play GTA 6 before it ends 😂😂
    • Google is opening the world's first AI museum in Los Angeles by Ivan Jenic Image via: Google Ever since AI image generators went mainstream, the debate over whether AI-generated art is real art hasn't let up. Those who don’t consider AI to be art say that if a machine does the creating and anyone can prompt it, there’s no skill involved, and therefore no art is produced. The counter-argument is equally persistent, as defenders of AI-generated artworks often claim that AI is just a tool, and that every major technological breakthrough, like the camera or the computer, was met with the same skepticism before eventually being accepted as a legitimate creative medium. Google’s position in this debate is clear. Which is no surprise, as the company is investing billions in AI infrastructure. And now, in efforts to encourage people to use its AI even more, Google is opening Dataland on June 20, which it's calling the world's first AI arts museum. Located inside The Grand LA, a Frank Gehry-designed building in Los Angeles, the museum spans 25,000 square feet. The museum is built around a collaboration with media artist Refik Anadol, who has worked with Google since 2016. The inaugural exhibition is called Machine Dreams: Rainforest, and is powered by an AI model trained on “an extensive dataset of the natural world.” It generates 1.2 billion pixels of visuals in real time and reacts to visitors dynamically. The space also generates soundscapes, real-time emotion sensing, and algorithmically produced scents. Image via: Refik Anadol Studio / Google Google says that the museum is powered by its Gemini models, which run on Google Cloud. So, everything is generated inside one of Google’s AI data centers and is streamed to the museum. Alongside the museum opening, Google Arts & Culture is funding an AI Artist Residency, giving four artists $25,000 grants each, along with mentorship from Refik Anadol Studio and access to Google's machine learning tools. Their work will be shown at Dataland and on the Google Arts & Culture website later this year. Google’s AI museum will undoubtedly initiate a fired-up debate on social media, and we can’t wait to see the first reactions. Via: Smithsonian Magazine
    • Calling GTA 6 overhyped crap doesn’t make you edgy, it just makes you sound like someone who hasn’t enjoyed anything since the PS2 era.
    • I’m not arguing whether Rockstar likes money. Obviously, they do, they’re a business. I’m saying this isn’t new. They’ve always launched console first. This is just how Rockstar operates.
  • Recent Achievements

    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      571
    2. 2
      +Edouard
      178
    3. 3
      PsYcHoKiLLa
      74
    4. 4
      Michael Scrip
      68
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!