Can someone explain why I shouldn't get an AMD FX CPU?


Recommended Posts

I was looking for a new CPU, and basing my decision on the performance scores from here and the price.

My current CPU (i5-750) scores 4,373.

These are the currently available CPUs, their scores, and their prices:

i5 2400S	4,857	?148.00
i5 2310		5,539	?142.00
i5 2320		5,681	?142.00
i5 2400		5,849	?148.96
i5 3330		5,851	?139.91
i5 2450P	6,026	?148.49
i5 2500		6,276	?160.49
i5 3450S	6,326	?154.49
i5 2380P	6,358	?141.87
i5 2500K	6,415	?165.07
i5 3450		6,490	?149.50
i5 3470S	6,501	?144.05
i5 3470		6,637	?147.88
i5 3550		6,922	?156.98
i5 3570		7,015	?168.32
i5 3570K	7,139	?175.05

FX-4300		 4,672	?96.22
FX-6200		 6,237	?100.70
FX-6300		 6,601	?101.96
FX-8120		 6,660	?121.00
FX-8150		 7,745	?137.73
FX-8320		 8,256	?126.64
FX-8350		 9,178	?158.60

It appears to me, the AMD FX chips are highly competitive, and much lower priced.

If I were to choose an AMD FX chip, I'd go for one of the bottom three in the chart above.

Should I go the AMD FX route?

Insanely high power usage. Around 100-150 watts idle, and 300+ at load (and that's without overclocking). And those benchmarks are only based on a single test. I'd recommend looking at an all round review for deciding. From what I can remember they're still way below the Intel CPU's in gaming but about equal for number crunching.

  • Like 3

Insanely high power usage. Around 100-150 watts idle, and 300+ at load (and that's without overclocking). And those benchmarks are only based on a single test. I'd recommend looking at an all round review for deciding. From what I can remember they're still way below the Intel CPU's in gaming but about equal for number crunching.

Ah, yeh, I'd be using it for gaming.

I would need some kind of chart, though. Or it's impossible to compare this many CPUs! :(

http://www.bit-tech.net/hardware/2012/11/06/amd-fx-8350-review/6

The best I could find, unfortunately I can't remember where I read the original review.

Basically AMD's philosophy is because they simply cannot match the efficiency of Intel's CPU's they are trying to make up the deficit by cramming more cores onto the die and running them at a higher clock speed. It seems to be working when number crunching but not so much for gaming.

Found some gaming benchmarks. I have edited the image to add current prices and the Passmark scores:

post-645-0-45148400-1360444749.png

if you already have a 3570k compatible Intel board, then yep go Intel, but if you already have an FX compatible board, 8350 all the way imo

if you already have a 3570k compatible Intel board, then yep go Intel, but if you have an FX compatible board, 8350 all the way imo

I would need a new motherboard if I got a newer Intel CPU, so it's not really a deciding factor.

According to the benchmarks above, the new AMD CPUs hold their weight against the Intel ones, even in gaming.

I would need a new motherboard if I got a newer Intel CPU, so it's not really a deciding factor.

According to the benchmarks above, the new AMD CPUs hold their weight against the Intel ones, even in gaming.

Yep that's what I've seen too, I'm in no hurry to drop AMD any more, I was disappointed with bulldozer, but piledriver seem to hold their own very well, I'm sticking AMD for the foreseeable future

AMD's fx cpu's only really hold up decently when in heavily multi-threaded loads. Things that aren't heavily threaded can fall behind intel quite a bit. And any game that's cpu bound to any degree with fall noticeably behind an intel chip.

Then again, the FX-8350 and 2500K have similar prices, the 8350 has a much higher Passmark but the 2500K beats it by quite a bit in gaming.

HMM! Decisions.

It definitely has come down to choice recently, vs price vs performance as it used to be, personally I like how AMD don't force socket upgrades with each new CPU release, so you can invest in a good AMD board and know you can continue to upgrade CPUs for quite some time before needing a new board

The i5-3570k only costs about ?15 more (?20 more if you go for boxed rather than OEM). It's a faster gaming CPU, and will consume a fraction of the power of an FX-8350, the effect on your electricity bill is something i'd personally advise factoring in. As far as I'm concerned it's simply a far superior choice.

It definitely has come down to choice recently, vs price vs performance as it used to be, personally I like how AMD don't force socket upgrades with each new CPU release, so you can invest in a good AMD board and know you can continue to upgrade CPUs for quite some time before needing a new board

FUD. Sandy Bridge and Ivy Bridge CPU's and boards are interoperable.

Insanely high power usage. Around 100-150 watts idle, and 300+ at load (and that's without overclocking). And those benchmarks are only based on a single test. I'd recommend looking at an all round review for deciding. From what I can remember they're still way below the Intel CPU's in gaming but about equal for number crunching.

I think those stats are for the whole system not just the CPU. Not fair to dump it all on it without a disclaimer.

@OP: Scratch the x1xx and x2xx because they're Bulldozer which is a bit slower and less efficient, unless you find an awesome deal or something. FXs are slower when it comes to performance per core, but as the game is more optimised for multi-threading the gap decreases. The # or cores should make them better for general usage too. Boards are also cheaper and the current socket should support next gen Steamroller, while Intel's 1155 will be replaced with 1150 for their next gen Haswell.

The i5-3570k only costs about ?15 more (?20 more if you go for boxed rather than OEM). It's a faster gaming CPU, and will consume a fraction of the power of an FX-8350, the effect on your electricity bill is something i'd personally advise factoring in. As far as I'm concerned it's simply a far superior choice.

I can't really afford a ?175 CPU, especially considering I have to factor in the cost of a new motherboard also :(

I can't really afford a ?175 CPU, especially considering I have to factor in the cost of a new motherboard also :(

Then why not save up? Over the course of it's life the saving in electricity will easily offset the extra cost of the CPU (or I see you're considering a 2500k also a good choice)

I think those stats are for the whole system not just the CPU. Not fair to dump it all on it without a disclaimer.

@OP: Scratch the x1xx and x2xx because they're bulldozer which is a bit slower and less efficient, unless you find an awesome deal or something. FXs are slower when it comes to performance per core, but as the game is more optimised for multi-threading the gap decreases. The # or cores should make them better for general usage too. Boards are also cheaper and the current socket should support next gen Steamroller, while Intel's 1155 will be replaced with 1150 for their next gen Haswell.

The tests are performed in the same way for both platforms, they are still valid

I can't really afford a ?175 CPU, especially considering I have to factor in the cost of a new motherboard also :(

As I said before, and as you are looking at CPUs for gaming, I have the ancient Phenom II 965 OCd to 4GHz and I don't have any CPU bottlenecks in any games that I can think of (Running a 7870 GPU)

Everyone would love a high end Intel machine, I don't want for anything really, apart from PhysX on benchmarks but that is NVidia GPU related not CPU

As I said before, and as you are looking at CPUs for gaming, I have the ancient Phenom II 965 OCd to 4GHz and I don't have any CPU bottlenecks in any games that I can think of (Running a 7870 GPU)

Everyone would love a high end Intel machine, I don't want for anything really, apart from PhysX on benchmarks

Except when comparing 2 CPU's at the same price point (8350 and 2500k) to choose a CPU that has less gaming power and consumes 3x as much power isn't being a smart consumer, it's simply insane. Pretty much the only reason to choose the 8350 over the 2500k would be if he were using his machine for programming, transcoding, or rendering. For gaming Intel CPU's beat AMD CPU's. Hands down.

The tests are performed in the same way for both platforms, they are still valid

You didn't give a source in that post, explained the methodology or compared it to Intel's offering so it was a statement without context. I know what you meant, but not everybody does.

As I said before, and as you are looking at CPUs for gaming, I have the ancient Phenom II 965 OCd to 4GHz and I don't have any CPU bottlenecks in any games that I can think of (Running a 7870 GPU)

Everyone would love a high end Intel machine, I don't want for anything really, apart from PhysX on benchmarks

Your phenom 2 is likely holding things back more than you think, especially with a gpu like that.

Except when comparing 2 CPU's at the same price point (8350 and 2500k) to choose a CPU that has less gaming power and consumes 3x as much power isn't being a smart consumer, it's simply insane. Pretty much the only reason to choose the 8350 over the 2500k would be if he were using his machine for programming, transcoding, or rendering. For gaming Intel CPU's beat AMD CPU's. Hands down.

I'm not trying to convince AMD over Intel, the guy says he is on a budget, I'm offering my experience for AMD,

Anyone with Intel experience is more than welcome to jump in,

I posted a review of the 8350 vs a few different Intel CPUs and the AMD faired very well

I would happily swap out my entire AMD setup for an Intel high end, but a lot of us don't have that luxury ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Classic outlook, not only does it have a much fuller feature set, it doesn't include Microsoft attempting to sync my emails from my servers to theirs. If classic outlook is ever removed from office, and the version I paid for in 2021 stops working for some reason, I'll use Thunderbird.
    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!