Can someone explain why I shouldn't get an AMD FX CPU?


Recommended Posts

Your phenom 2 is likely holding things back more than you think, especially with a gpu like that.

I've left a few different apps open during gaming to monitor my CPU load and I think GTAIV pulled the most from it, recently barely anything

But as I just said the 2500k and the 8350 are the SAME PRICE. It's not high end when the 2 products are the same price.

Ok, so offer OP a setup then !

We're not sizing d*cks here, we're trying to offer advice

Efficiency should not be undervalued. Less power consumption = less heat = less noise. I've recently built quite a powerful Ivy Bridge system for someone and even under full CPU load it was hardly audible. If AMD CPU's really can use 200W+ under load it'll be very noisy.

Ok, not 3x higher, but still a significant difference. More power consumption for less raw performance isn't an acceptable tradeoff regardless of how you pad the numbers.

Ok, so offer OP a setup then !

We're not sizing d*cks here, we're trying to offer advice

I am offering him advice... the advice that choosing a poorer performing option over a better option when paying the same money is bad :/

I am offering him advice... the advice that choosing a poorer performing option over a better option when paying the same money is bad :/

And if you read my posts, I promote Intel as the better option if you have the ?? or as you say, it is the same price, so long as you are happy to buy that setup and more or less be done with upgrading without buying a new socket board for their next CPU releases

There's absolutely no guarantee that AMD will stick to the same socket either, buying computer components on a basis of complete guesswork isn't rational. All I am trying to do is advise him to buy the product that will perform best in his price range. If it had been 2005 and the question had been AMD Opteron vs Pentium D I'd have advised the AMD option hands down, but this is 2012 and the Intel option will be his best bet for gaming. Yes, sockets are likely to change but that's nothing more than guesswork at the moment.

There's absolutely no guarantee that AMD will stick to the same socket either, buying computer components on a basis of complete guesswork isn't rational. All I am trying to do is advise him to buy the product that will perform best in his price range. If it had been 2005 and the question had been AMD Opteron vs Pentium D I'd have advised the AMD option hands down, but this is 2012 and the Intel option will be his best bet for gaming. Yes, sockets are likely to change but that's nothing more than guesswork at the moment.

Guesswork?

AMD have always done their best to provide backwards compatible hardware, I had an ancient AM2 board with this PII 965 I have now in my AM3+ board

Yes they will inevitably move to a new socket board which will require a new socket CPU, but do some research...

I have to agree with Javik. With all the benefits going to the 2500k and it being almost the same price, it would be ludicrous to not go for that over the AMD.

Not sure what Detection is going on about...

Should be /thread.

Hi All

Got Me a NEW System in June 2012, Spent months debating between AMD and Intel, In the End Choose an AMD APU based system with my budget could handle, and have to say it holds it's own in games, and other things I do, sure not the fastest machine I could've gotten, but it works for my needs.

Runs Metro 2033 Just fine, Battlefield 3, Crysis 3, Secondlife, and Photoshop and Windows 8 Pro 64bit

Thought about AMD Fx system for a bit there, but ended up being over budget for myself

Guesswork?

AMD have always done their best to provide backwards compatible hardware, I had an ancient AM2 board with this PII 965 I have now in my AM3+ board

Yes they will inevitably move to a new socket board which will require a new socket CPU, but do some research...

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

I have to agree with Javik. With all the benefits going to the 2500k and it being almost the same price, it would be ludicrous to not go for that over the AMD.

Not sure what Detection is going on about...

Should be /thread.

You could buy cheaper parts and overclock those unlike anything else that isn't K series which only allow for a very tiny increase.

/thread?

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

I never pay more than ?50 for a motherboard since I don't overclock, and also since motherboards don't affect system performance at all. As long as the motherboard has the right amount of ports for me, I'm happy.

I say go for AMD, difference is negligible nowadays in gaming, plus they are cheaper and normally better in multithreading task (most of newer games are like this), thin about it, you get nice hardware for less (plus a motherboard that will surely last longer that most of the intel builds)

You could buy cheaper parts and overclock those unlike anything else that isn't K series which only allow for a very tiny increase.

/thread?

And given that the 2500k is about the same price as the 8350 that argument is null and void and was before you even wasted the effort on typing.

I never pay more than ?50 for a motherboard since I don't overclock, and also since motherboards don't affect system performance at all. As long as the motherboard has the right amount of ports for me, I'm happy.

Complete fallacy. Motherboards absolutely have an effect on system performance.

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

You're just supporting his point. He was able to upgrade to the newest motherboard with all the "technological enhancements" and keep his old CPU.

And as stated, he'll be buying a new socket regardless of what he buys so that's completely irrelevant. Anyway, the facts have been presented. The 2500k is a better CPU than the 8350 for his needs, it's the same price, and it consumes less power. Those are the facts, and I am no longer going to waste my time with this as if the OP wants to take the advice of people that are advising him to basically waste his money that's his loss.

Please note... there is no post where Javik says actually something in favor of AMD, all what he tries to do is to promote Intel. (look at his post for it, it isn't the first time that he does that, even when persons only asks for AMD processors only)

And as stated, he'll be buying a new socket regardless of what he buys so that's completely irrelevant. Anyway, the facts have been presented. The 2500k is a better CPU than the 8350 for his needs, it's the same price, and it consumes less power. Those are the facts, and I am no longer going to waste my time with this as if the OP wants to take the advice of people that are advising him to basically waste his money that's his loss.

No, I said I would buy an 8350 CPU, which is the same socket as the motherboard I own

My upgrades are my choice

And given that the 2500k is about the same price as the 8350 that argument is null and void and was before you even wasted the effort on typing.

Complete fallacy. Motherboards absolutely have an effect on system performance.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

No, what I'm doing is advising the guy to buy the product that fits his needs better in his price range. The 2500k is a better gaming CPU than the 8350 and it's the same price, which makes it a better choice for him. I've owned AMD and Intel products in the past so I am actually pretty objective here.

If there are 2 products in a price range and one performs better than another for a user's needs then it's not bloody rocket science, you advise the user to buy what suits their needs.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

But, but, but... the FX chip runs at 9000+ watts moar than Intels!!

Don't you just love when people pull "facts" from their rear.

The Intel fanboyism is strong in this thread.

No, what I'm doing is advising the guy to buy the product that fits his needs better in his price range. The 2500k is a better gaming CPU than the 8350 and it's the same price, which makes it a better choice for him. I've owned AMD and Intel products in the past so I am actually pretty objective here.

If there are 2 products in a price range and one performs better than another for a user's needs then it's not bloody rocket science, you advise the user to buy what suits their needs.

Yeah..... no, you always say that in all your post.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

I'd advise learning to read. The OP said he doesn't like to overclock which makes that completely irrelevant.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I don't hate the new menus, I am not a fan of the lack of features and how they went live when they clearly are not complete. The menu itself presents much better than the previous - but what's lacking (IMO) is: 1) Any kind of automated manipulation such as: "this goes on the new menu because you use this feature more often on this filetype" "this is rarely used and will fall back to the old menu" 2) Any kind of user manipulation such as: "a UI to add/remove/order items to the new menu"
    • The biggest issue in this version of Win 11 context menu, from usability standpoint, is the movable row with basic commands. Think of a car analogy...if You turn the week left the infotainment screen will move right and vice versa. With how it works now Microsoft made something forbidden in designing in any UI, software or hardware. I can't grasp who were the morons within Microsoft suggesting it was a good idea and gave it a green light.
    • LibreOffice 26.2.4 by Razvan Serea LibreOffice is the free power-packed Open Source personal productivity suite for Windows, Macintosh and Linux, that gives you six feature-rich applications for all your document production and data processing needs: Writer, Calc, Impress, Draw, Math and Base. Support and documentation is free from our large, dedicated community of users, contributors and developers. You, too, can also get involved! Choosing Between LibreOffice Still and LibreOffice Fresh: LibreOffice Still is a good choice if you value stability, a longer support cycle, and a more conservative approach to software updates. It's suitable for businesses and organizations where reliability and compatibility are crucial. LibreOffice Fresh is ideal if you're an enthusiast or an early adopter who wants to stay on the cutting edge of LibreOffice development and is willing to accept more frequent updates and occasional minor issues. Features: Writer is the word processor inside LibreOffice. Use it for everything, from dashing off a quick letter to producing an entire book with tables of contents, embedded illustrations, bibliographies and diagrams. The while-you-type auto-completion, auto-formatting and automatic spelling checking make difficult tasks easy (but are easy to disable if you prefer). Writer is powerful enough to tackle desktop publishing tasks such as creating multi-column newsletters and brochures. The only limit is your imagination. Calc tames your numbers and helps with difficult decisions when you're weighing the alternatives. Analyze your data with Calc and then use it to present your final output. Charts and analysis tools help bring transparency to your conclusions. A fully-integrated help system makes easier work of entering complex formulas. Add data from external databases such as SQL or Oracle, then sort and filter them to produce statistical analyses. Use the graphing functions to display large number of 2D and 3D graphics from 13 categories, including line, area, bar, pie, X-Y, and net - with the dozens of variations available, you're sure to find one that suits your project. Impress is the fastest and easiest way to create effective multimedia presentations. Stunning animation and sensational special effects help you convince your audience. Create presentations that look even more professional than the standard presentations you commonly see at work. Get your collegues' and bosses' attention by creating something a little bit different. Draw lets you build diagrams and sketches from scratch. A picture is worth a thousand words, so why not try something simple with box and line diagrams? Or else go further and easily build dynamic 3D illustrations and special effects. It's as simple or as powerful as you want it to be. Base is the database front-end of the LibreOffice suite. With Base, you can seamlessly integrate into your existing database structures. Based on imported and linked tables and queries from MySQL, PostgreSQL or Microsoft Access and many other data sources, you can build powerful databases containing forms, reports, views and queries. Full integration is possible with the in-built HSQL database. Math is a simple equation editor that lets you lay-out and display your mathematical, chemical, electrical or scientific equations quickly in standard written notation. Even the most-complex calculations can be understandable when displayed correctly. E=mc2. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. Download: LibreOffice 64-bit | LibreOffice 32-bit ~300.0 MB (Open Source) View: LibreOffice Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Amazon eero Pro 6E mesh Wi-Fi system 2-pack is 27% off by Ivan Jenic The Amazon eero Pro 6E mesh Wi-Fi system is currently $239.99 on Amazon for the 2-pack, down from $329.99. That's 27% off and $90 saved for a solid Wi-Fi solution that covers your entire home (purchase link down below). The 2-pack covers up to 4,000 square feet (372 square meters) and supports 100+ connected devices, which handles the vast majority of home setups without breaking a sweat. Wi-Fi 6E brings access to the 6 GHz band for lower latency across the network, and the 2.5 Gb Ethernet port supports gigabit+ internet plans if your ISP offers them. eero's TrueMesh technology handles traffic routing automatically, so you're not manually managing which devices connect to which node. You set up the entire thing through the eero app, and the entire process takes a few minutes. The system also receives automatic security updates in the background, so once you set it up, you don't have to worry about compatibility issues. If you're covering a larger home or want more nodes, the 3-pack is $329.99 and the 4-pack is $479.98, both at similar discount levels. It's worth mentioning that a newer model exists, which is likely the reason for the discount, but the Pro 6E is still perfectly capable hardware for most homes. Amazon eero Pro 6E mesh Wi-Fi system 2-pack - $239.99 | 27% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      484
    2. 2
      PsYcHoKiLLa
      258
    3. 3
      Skyfrog
      84
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      63
  • Tell a friend

    Love Neowin? Tell a friend!