Can someone explain why I shouldn't get an AMD FX CPU?


Recommended Posts

Your phenom 2 is likely holding things back more than you think, especially with a gpu like that.

I've left a few different apps open during gaming to monitor my CPU load and I think GTAIV pulled the most from it, recently barely anything

But as I just said the 2500k and the 8350 are the SAME PRICE. It's not high end when the 2 products are the same price.

Ok, so offer OP a setup then !

We're not sizing d*cks here, we're trying to offer advice

Efficiency should not be undervalued. Less power consumption = less heat = less noise. I've recently built quite a powerful Ivy Bridge system for someone and even under full CPU load it was hardly audible. If AMD CPU's really can use 200W+ under load it'll be very noisy.

Ok, not 3x higher, but still a significant difference. More power consumption for less raw performance isn't an acceptable tradeoff regardless of how you pad the numbers.

Ok, so offer OP a setup then !

We're not sizing d*cks here, we're trying to offer advice

I am offering him advice... the advice that choosing a poorer performing option over a better option when paying the same money is bad :/

I am offering him advice... the advice that choosing a poorer performing option over a better option when paying the same money is bad :/

And if you read my posts, I promote Intel as the better option if you have the ?? or as you say, it is the same price, so long as you are happy to buy that setup and more or less be done with upgrading without buying a new socket board for their next CPU releases

There's absolutely no guarantee that AMD will stick to the same socket either, buying computer components on a basis of complete guesswork isn't rational. All I am trying to do is advise him to buy the product that will perform best in his price range. If it had been 2005 and the question had been AMD Opteron vs Pentium D I'd have advised the AMD option hands down, but this is 2012 and the Intel option will be his best bet for gaming. Yes, sockets are likely to change but that's nothing more than guesswork at the moment.

There's absolutely no guarantee that AMD will stick to the same socket either, buying computer components on a basis of complete guesswork isn't rational. All I am trying to do is advise him to buy the product that will perform best in his price range. If it had been 2005 and the question had been AMD Opteron vs Pentium D I'd have advised the AMD option hands down, but this is 2012 and the Intel option will be his best bet for gaming. Yes, sockets are likely to change but that's nothing more than guesswork at the moment.

Guesswork?

AMD have always done their best to provide backwards compatible hardware, I had an ancient AM2 board with this PII 965 I have now in my AM3+ board

Yes they will inevitably move to a new socket board which will require a new socket CPU, but do some research...

I have to agree with Javik. With all the benefits going to the 2500k and it being almost the same price, it would be ludicrous to not go for that over the AMD.

Not sure what Detection is going on about...

Should be /thread.

Hi All

Got Me a NEW System in June 2012, Spent months debating between AMD and Intel, In the End Choose an AMD APU based system with my budget could handle, and have to say it holds it's own in games, and other things I do, sure not the fastest machine I could've gotten, but it works for my needs.

Runs Metro 2033 Just fine, Battlefield 3, Crysis 3, Secondlife, and Photoshop and Windows 8 Pro 64bit

Thought about AMD Fx system for a bit there, but ended up being over budget for myself

Guesswork?

AMD have always done their best to provide backwards compatible hardware, I had an ancient AM2 board with this PII 965 I have now in my AM3+ board

Yes they will inevitably move to a new socket board which will require a new socket CPU, but do some research...

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

I have to agree with Javik. With all the benefits going to the 2500k and it being almost the same price, it would be ludicrous to not go for that over the AMD.

Not sure what Detection is going on about...

Should be /thread.

You could buy cheaper parts and overclock those unlike anything else that isn't K series which only allow for a very tiny increase.

/thread?

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

I never pay more than ?50 for a motherboard since I don't overclock, and also since motherboards don't affect system performance at all. As long as the motherboard has the right amount of ports for me, I'm happy.

I say go for AMD, difference is negligible nowadays in gaming, plus they are cheaper and normally better in multithreading task (most of newer games are like this), thin about it, you get nice hardware for less (plus a motherboard that will surely last longer that most of the intel builds)

You could buy cheaper parts and overclock those unlike anything else that isn't K series which only allow for a very tiny increase.

/thread?

And given that the 2500k is about the same price as the 8350 that argument is null and void and was before you even wasted the effort on typing.

I never pay more than ?50 for a motherboard since I don't overclock, and also since motherboards don't affect system performance at all. As long as the motherboard has the right amount of ports for me, I'm happy.

Complete fallacy. Motherboards absolutely have an effect on system performance.

That approach might be cheaper but it also causes technology to stagnate. My motherboard was actually the most expensive part of my current build, even more so than the CPU but I was happy to pay it because it's a fantastic board. Even if the physical characteristics of a CPU socket stay the same, newer motherboards invariably bring some technological enhancements so staying with the same motherboard for years isn't necessarily a good thing anyway.

You're just supporting his point. He was able to upgrade to the newest motherboard with all the "technological enhancements" and keep his old CPU.

And as stated, he'll be buying a new socket regardless of what he buys so that's completely irrelevant. Anyway, the facts have been presented. The 2500k is a better CPU than the 8350 for his needs, it's the same price, and it consumes less power. Those are the facts, and I am no longer going to waste my time with this as if the OP wants to take the advice of people that are advising him to basically waste his money that's his loss.

Please note... there is no post where Javik says actually something in favor of AMD, all what he tries to do is to promote Intel. (look at his post for it, it isn't the first time that he does that, even when persons only asks for AMD processors only)

And as stated, he'll be buying a new socket regardless of what he buys so that's completely irrelevant. Anyway, the facts have been presented. The 2500k is a better CPU than the 8350 for his needs, it's the same price, and it consumes less power. Those are the facts, and I am no longer going to waste my time with this as if the OP wants to take the advice of people that are advising him to basically waste his money that's his loss.

No, I said I would buy an 8350 CPU, which is the same socket as the motherboard I own

My upgrades are my choice

And given that the 2500k is about the same price as the 8350 that argument is null and void and was before you even wasted the effort on typing.

Complete fallacy. Motherboards absolutely have an effect on system performance.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

No, what I'm doing is advising the guy to buy the product that fits his needs better in his price range. The 2500k is a better gaming CPU than the 8350 and it's the same price, which makes it a better choice for him. I've owned AMD and Intel products in the past so I am actually pretty objective here.

If there are 2 products in a price range and one performs better than another for a user's needs then it's not bloody rocket science, you advise the user to buy what suits their needs.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

But, but, but... the FX chip runs at 9000+ watts moar than Intels!!

Don't you just love when people pull "facts" from their rear.

The Intel fanboyism is strong in this thread.

No, what I'm doing is advising the guy to buy the product that fits his needs better in his price range. The 2500k is a better gaming CPU than the 8350 and it's the same price, which makes it a better choice for him. I've owned AMD and Intel products in the past so I am actually pretty objective here.

If there are 2 products in a price range and one performs better than another for a user's needs then it's not bloody rocket science, you advise the user to buy what suits their needs.

Yeah..... no, you always say that in all your post.

How about the 8320? That one is cheaper and can be overclocked to 8350 levels and beyond.

As for motherboard performance, show some proof. Differences are less than 3% unless its defective.

I'd advise learning to read. The OP said he doesn't like to overclock which makes that completely irrelevant.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Classic outlook, not only does it have a much fuller feature set, it doesn't include Microsoft attempting to sync my emails from my servers to theirs. If classic outlook is ever removed from office, and the version I paid for in 2021 stops working for some reason, I'll use Thunderbird.
    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!