Recommended Posts

An Indiana man was at Bill Goodman's Gun And Knife Show in Dayton Saturday and decided to purchase a holster for his handgun. The 50-year-old, a conceal carry permit holder, proudly took his new holster out to the parking lot, got in his car, and went to holster his gun...

And promptly shot himself. :|

The Indiana man was rushed to a nearby hospital, where sources say the bullet fatally wounded a finger on his left hand. They will not be able to reattach the finger.

Local police say they will not file any charges. The man was not identified, for obvious reasons.

source

Link to comment
https://www.neowin.net/forum/topic/1138466-man-buys-gun-holster/
Share on other sites

An Indiana man was at Bill Goodman's Gun And Knife Show in Dayton Saturday and decided to purchase a holster for his handgun. The 50-year-old, a conceal carry permit holder, proudly took his new holster out to the parking lot, got in his car, and went to holster his gun...

And promptly shot himself. :|

The Indiana man was rushed to a nearby hospital, where sources say the bullet fatally wounded a finger on his left hand. They will not be able to reattach the finger.

Local police say they will not file any charges. The man was not identified, for obvious reasons.

source

And you wonder how many more idiots like this goes unreported.

2 things wondering what kind of holster and he should have had the safety on. I am assuming its a hard case holster.

I am curious what pistol it was. However not all pistols have a safety. None of mine do. If he was trying to figure out if it fit, then he should have unloaded it, and then did it. Or if he did that already and was putting it back in, then he shouldn't have had his finger on the trigger or anywhere near the trigger/ trigger guard.

I am curious what pistol it was. However not all pistols have a safety. None of mine do. If he was trying to figure out if it fit, then he should have unloaded it, and then did it. Or if he did that already and was putting it back in, then he shouldn't have had his finger on the trigger or anywhere near the trigger/ trigger guard.

My .40 S&W doesn't have a safety but it has a heavy trigger. U remember there being a recall a couple years ago on a certainodel police holster what would happen was the plastic strap would slip down and into the trigger guard causing a discharge. I remember hearing a couple of cops being wounded by it. They made a recall and by that I mean you switched the plastic strap for a cloth one after you payes for it.

2 things wondering what kind of holster and he should have had the safety on. I am assuming its a hard case holster.

There are plenty of firearms that have no safety, the safety lies in a double action trigger and a long trigger pull.

My firearm has no safety, but I'd be hard-pressed to let it go off inadvertently as it is rates at 6 pounds trigger pull. I'd be willing to bet this guy had a hair trigger single-action pistol.

There is a picture on the Blog that shows a pistol with a safety, but I doubt that is the weapon this guy used.

There are plenty of firearms that have no safety, the safety lies in a double action trigger.

My firearm has no safety, but I'd be hard-pressed to let it go off inadvertently as it is rates at 6 pounds. I'd be willing to bet this guy had a hair trigger single-action pistol.

Most revolvers do not have a safety, like you said double action. My .357 does not have one.

My SIG Sauer P250sc has no safety being a double action automatic, but as others have said the pull is relatively heavy at 6+ pounds and that trigger has to move almost all the way back to fire - a long travel.

Double actions are not carried cocked (the firing pin or hammer under spring tension) as the long trigger pull does that when you go to shoot. Many such firearms also have an interlock that prevents the firing pin from moving until the trigger is all rhe way back to the release point. You could smack the thing with a hammer and it wouldn't go off. A built-in safety without a lever.

My guess is that this guy had a single action automatic and carried it cocked. In that state. If the safety lever is accidentally released the trigger then needs little pressure to release - IMO an accident looking for a place to happen.

Earlier model Glocks had a problem with accidental discharge, to the point where Detroit area PD officers started referring to the injury as "Glock Leg," a term still in common use in this area.

Hum,

With automatics carrying one in the chamber isn't unusual, it's pretty much normal for cops and concealed defensive carry as you may not have time to cycle the slide to load a round.

The question is if the firearm has the necessary passive safety interlocks and if it has a double action trigger for that first shot. Double action only (DAO) pistols obviously do, Many single action pistols also have double action for the first shot and single action thereafter (DA/SA).

IMO only these automatic actions should be used for concealed carry, and indeed many police departments and some federal agencies require them - many going DAO only.

For revolvers the proper technique is an empty chamber under the hammer, or a revolver with a between the chambers rest position - something that's been around since at least the Remington New Model Army of 1858 (I have one.)

Turkish: F**k me, hold tight. What's that?

Tommy: It's me belt, Turkish.

Turkish: No, Tommy. There's a gun in your trousers. What's a gun doing in your trousers?

Tommy: It's for protection.

Turkish: Protection from what? Zee Germans? What's to stop it from blowing your b******s off every time you sit down?

This topic is now closed to further replies.
  • Posts

    • Sony announces Bungie layoffs that will affect "significant number of employees" by Pulasthi Ariyasinghe Sony today announced that major layoffs are happening at its first-party studio Bungie, the developer that has spawned series like Halo, Destiny, and Marathon over the past decades. The news arrives just weeks after Bungie delivered the final update to Destiny 2, and it's that team being hit with the layoffs the most. CEO of Sony Interactive Entertainment Hermen Hulst revealed the staff reduction today, calling it "painful news." "Over the past several months, together with Bungie leadership, we reviewed the studio’s long-term direction, development priorities, resource needs, and role within our broader portfolio strategy," said Hulst, explaining the decision. "We explored multiple alternatives before concluding that a reduction was necessary to align the studio’s resources with its current priorities and long-term goals." The layoffs will be hitting "a significant number of employees" across most of the Destiny franchise development team. It doesn't look like Sony is planning to continue the series following Destiny 2's sunsetting update. The studio is said to be in early stages of looking at other projects to pivot to, but it's said that keeping the size of the team at current levels is no longer feasible. "We know this decision has a profound impact on the people affected, their families, friends, and teammates," said Bungie leadership in a separate message on social media. "While these changes are necessary to best position the studio now and for the future, that does not lessen the difficulty of this moment or the impact it has on those affected." At the same time, "some" of the Marathon development team are also affected by the layoffs. The recently released multiplayer-only extraction shooter title hasn't seen a big boom of players either, but the company is reportedly hoping that the live service experience will pick up players with future updates.
    • Microsoft adds reusable skills and finance data connectors to Copilot in Excel by Karthik Mudaliar Microsoft is giving Copilot in Excel a collection of new features aimed squarely at finance teams. The update introduces reusable instructions for common tasks, connections to services such as FactSet and Morningstar, and a better way to review what Copilot intends to do before it starts changing a workbook. The most interesting addition is 'Skills' finally coming to Copilot in Excel. Skills let companies teach Copilot how to handle a recurring process, so employees do not need to write the same detailed prompt every month. Users can create skills that can specify the steps Copilot should follow, along with the required layout, formulas, and formatting. Microsoft says users can create their own skills by saving a SKILL.md file in OneDrive. The file is written using Markdown and tells Copilot when and how to perform the task. Once it is available, a user can select the skill in the Copilot pane or mention it in a prompt using the @ symbol. There is also a library of prebuilt finance skills for customers who do not want to create their own. Microsoft plans to let developers distribute additional skills through the Microsoft Marketplace and the Microsoft 365 Admin Center, with LSEG, Ramp, Rogo, samaya.ai, Velixo, and Vena among the first partners involved. The company says that it is also expanding the external data that Copilot can access from inside Excel. New connectors are being added for CB Insights, Daloopa, FactSet, Morningstar, PitchBook, and S&P Global data through technology developed by Kensho. There is a catch, however. Accessing these services may require a separate subscription from the relevant data provider, so a Microsoft 365 Copilot licence will not necessarily unlock all of them. FactSet is also only available in preview for now, with general availability planned for July. Microsoft is also trying to make Copilot’s workbook edits easier to inspect. Users can switch to a planning mode that shows which sheets, cell ranges, formulas, and assumptions Copilot intends to work with before it begins making changes. Once the work is complete, the Show Changes pane can distinguish edits made by Copilot from those made by human collaborators. The update continues Microsoft’s push to turn Excel Copilot from a chatbot into an agent that can carry out longer tasks. The company previously added an Agent Mode capable of planning and completing multi-step Excel work. Microsoft also recently acquired financial AI startup Fintool, another indication that finance is becoming a key target for its Excel AI strategy. Prebuilt skills, personalization, workbook rules, external connectors, planning mode, and Copilot attribution in Show Changes are generally available to Microsoft 365 Copilot customers using Excel on the web, Windows, and macOS. Custom skills are initially available to Microsoft 365 Insiders on Windows and Mac starting today. Microsoft plans to make them generally available across Windows, Mac, and the web over the next month. Partner-built skills are expected during the third quarter of the year. Availability may still differ depending on region and licensing.
    • Exactly. They serve different (although related) purposes.
    • Do not enter the code under any circumstances, or you will be sorry. It's definitely and most likely a hacking attempt.  That happened to me a couple of years ago, and I kept receiving those prompts for months. It's simply the attacker trying to get you tired of the constant requests, so you just give up and enter the code, so they can log in to your account. 
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      438
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Xenon
      77
    5. 5
      Michael Scrip
      75
  • Tell a friend

    Love Neowin? Tell a friend!