Recommended Posts

An Indiana man was at Bill Goodman's Gun And Knife Show in Dayton Saturday and decided to purchase a holster for his handgun. The 50-year-old, a conceal carry permit holder, proudly took his new holster out to the parking lot, got in his car, and went to holster his gun...

And promptly shot himself. :|

The Indiana man was rushed to a nearby hospital, where sources say the bullet fatally wounded a finger on his left hand. They will not be able to reattach the finger.

Local police say they will not file any charges. The man was not identified, for obvious reasons.

source

Link to comment
https://www.neowin.net/forum/topic/1138466-man-buys-gun-holster/
Share on other sites

An Indiana man was at Bill Goodman's Gun And Knife Show in Dayton Saturday and decided to purchase a holster for his handgun. The 50-year-old, a conceal carry permit holder, proudly took his new holster out to the parking lot, got in his car, and went to holster his gun...

And promptly shot himself. :|

The Indiana man was rushed to a nearby hospital, where sources say the bullet fatally wounded a finger on his left hand. They will not be able to reattach the finger.

Local police say they will not file any charges. The man was not identified, for obvious reasons.

source

And you wonder how many more idiots like this goes unreported.

2 things wondering what kind of holster and he should have had the safety on. I am assuming its a hard case holster.

I am curious what pistol it was. However not all pistols have a safety. None of mine do. If he was trying to figure out if it fit, then he should have unloaded it, and then did it. Or if he did that already and was putting it back in, then he shouldn't have had his finger on the trigger or anywhere near the trigger/ trigger guard.

I am curious what pistol it was. However not all pistols have a safety. None of mine do. If he was trying to figure out if it fit, then he should have unloaded it, and then did it. Or if he did that already and was putting it back in, then he shouldn't have had his finger on the trigger or anywhere near the trigger/ trigger guard.

My .40 S&W doesn't have a safety but it has a heavy trigger. U remember there being a recall a couple years ago on a certainodel police holster what would happen was the plastic strap would slip down and into the trigger guard causing a discharge. I remember hearing a couple of cops being wounded by it. They made a recall and by that I mean you switched the plastic strap for a cloth one after you payes for it.

2 things wondering what kind of holster and he should have had the safety on. I am assuming its a hard case holster.

There are plenty of firearms that have no safety, the safety lies in a double action trigger and a long trigger pull.

My firearm has no safety, but I'd be hard-pressed to let it go off inadvertently as it is rates at 6 pounds trigger pull. I'd be willing to bet this guy had a hair trigger single-action pistol.

There is a picture on the Blog that shows a pistol with a safety, but I doubt that is the weapon this guy used.

There are plenty of firearms that have no safety, the safety lies in a double action trigger.

My firearm has no safety, but I'd be hard-pressed to let it go off inadvertently as it is rates at 6 pounds. I'd be willing to bet this guy had a hair trigger single-action pistol.

Most revolvers do not have a safety, like you said double action. My .357 does not have one.

My SIG Sauer P250sc has no safety being a double action automatic, but as others have said the pull is relatively heavy at 6+ pounds and that trigger has to move almost all the way back to fire - a long travel.

Double actions are not carried cocked (the firing pin or hammer under spring tension) as the long trigger pull does that when you go to shoot. Many such firearms also have an interlock that prevents the firing pin from moving until the trigger is all rhe way back to the release point. You could smack the thing with a hammer and it wouldn't go off. A built-in safety without a lever.

My guess is that this guy had a single action automatic and carried it cocked. In that state. If the safety lever is accidentally released the trigger then needs little pressure to release - IMO an accident looking for a place to happen.

Earlier model Glocks had a problem with accidental discharge, to the point where Detroit area PD officers started referring to the injury as "Glock Leg," a term still in common use in this area.

Hum,

With automatics carrying one in the chamber isn't unusual, it's pretty much normal for cops and concealed defensive carry as you may not have time to cycle the slide to load a round.

The question is if the firearm has the necessary passive safety interlocks and if it has a double action trigger for that first shot. Double action only (DAO) pistols obviously do, Many single action pistols also have double action for the first shot and single action thereafter (DA/SA).

IMO only these automatic actions should be used for concealed carry, and indeed many police departments and some federal agencies require them - many going DAO only.

For revolvers the proper technique is an empty chamber under the hammer, or a revolver with a between the chambers rest position - something that's been around since at least the Remington New Model Army of 1858 (I have one.)

Turkish: F**k me, hold tight. What's that?

Tommy: It's me belt, Turkish.

Turkish: No, Tommy. There's a gun in your trousers. What's a gun doing in your trousers?

Tommy: It's for protection.

Turkish: Protection from what? Zee Germans? What's to stop it from blowing your b******s off every time you sit down?

This topic is now closed to further replies.
  • Posts

    • Which finger's fingernail are we talking about? I can see how not having this info can lead to massive differences in interpretation.
    • This Chinese company is reportedly developing a feature Apple and Samsung can only dream of by Hamid Ganji While companies like Apple and Samsung have been relatively conservative with their devices’ battery capacities in recent years, Chinese manufacturers have taken the competition to the next level by introducing significantly larger batteries. However, the latest report from China suggests that a local company may already be developing a smartphone with a whopping 14,000mAh battery. Chinese leaker Digital Chat Station claimed on Weibo that a smartphone maker is developing a device with a 14,000mAh battery. If true, it would be the largest battery ever used in a smartphone and could, in theory, provide up to a week of battery life on a single charge. The leaker did not reveal the name of the company behind the device, but there are some clues. This week, HONOR unveiled the X80 Pro Max in China with an 11,000mAh battery and 90W wired charging support. The company also launched the Honor Win in January, which packs a 10,000mAh battery. HONOR, a former subsidiary of Huawei, has a proven track record of developing smartphones with unusually large batteries. However, other Chinese brands, including Xiaomi, have also launched devices such as the Xiaomi 17 Pro Max with 7,500mAh batteries. Though Chinese users on Weibo also believe the company behind the new battery is HONOR. Interestingly, Digital Chat Station said the device with the 14,000mAh battery weighs around 220 grams, making it lighter than the Apple iPhone 17 Pro Max (233 grams) and slightly heavier than the Samsung Galaxy S26 Ultra (214 grams). The iPhone 17 Pro Max currently packs a 5,088mAh battery in eSIM-only versions, while the Galaxy S26 Ultra features a 5,000mAh battery. Neither device is expected to see a dramatic increase in battery capacity in its next-generation successor. So when it comes to battery comparison, Chinese brands are unbeaten. HONOR smartphones are currently available in the EU, but the Chinese brand has no official presence in the United States due to restrictions imposed by the U.S. government.
    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!