Recommended Posts

The time change begins on Sunday, March 10, at 2 a.m., when clocks are moved forward by one hour. :(

Why 2 a.m.?

The time change is set for 2 a.m. because it was decided to be the least disruptive time of day. Moving time forward or back an hour at that time doesn?t change the date, which avoids confusion, and most people are asleep, or if people do work on a Sunday, it?s usually later than 2 a.m.

Do all states observe daylight saving time?

Hawaii and most of Arizona don?t observe the time change. U.S. territories that don?t go on daylight saving time include American Samoa, Guam, Puerto Rico and the Virgin Islands

http://news.yahoo.com/blogs/lookout/time-spring-forward-five-facts-daylight-saving-time-223010524.html

Link to comment
https://www.neowin.net/forum/topic/1140414-time-to-spring-forward-usa/
Share on other sites

i really thing daylight savings time is useless anymore, it was created to help when everyone was farming but that just is not the case anymore and to be honest to a farmer they dont care what time it is they just get the job done.

I always had heard that daylight savings was for energy saving reasons. But I'm not sure if that is true. I think it is possible that in the hotter months if people get their days started earlier and business and shopping centers open earlier, they are taking advantage of the cool morning. Slightly less AC every day which probably adds up across the whole population.

Or may be completely meaningless since everyone will just run their AC more at home when they get back from work.

With the advance of time by an hour, my inner dracula exclaims "Agh! My eyes! The light is too bright for my eyes!" every year around this time. :D

I always tend to get all excited when we turn the clocks back, but when they move forward, I dread it. I have limited time in my day anyway between work, running my super small business, family and school that losing an hour right now is kind of a big bummer.

i really thing daylight savings time is useless anymore, it was created to help when everyone was farming but that just is not the case anymore and to be honest to a farmer they dont care what time it is they just get the job done.

Actually it's a huge pain in the ass for farmers since they have to change their milking schedule. Sucks for cows.

Daylight savings time was instituted to save energy. It has long outlived its usefulness and needs to go away.

  • Like 2

Actually it's a huge pain in the ass for farmers since they have to change their milking schedule. Sucks for cows.

Daylight savings time was instituted to save energy. It has long outlived its usefulness and needs to go away.

Hope you're talking about the milking machines. Fairly certain that cows and other animals cannot read a clock. :shiftyninja: :rofl:

who invented this 'DST' anyway?

I believe it was Benjamin Franklin.

Hmmm ...

Benjamin Franklin is sometimes credited with the invention of daylight saving time. In 1784, he made a joking reference to something like daylight saving in a letter from France -- but apparently never thought anything of the sort would ever be adopted.

There's now broad agreement among historians that the true mastermind of daylight saving time was George Vernon Hudson (1867-1946), a specialist in insect biology (entomology) who left England for New Zealand in 1881. In 1895, when he first presented the idea to the Royal Society of New Zealand, he was mocked. Other members of the society deemed the proposal confusing and unnecessary. But attitudes changed, and he lived to see his brainchild adopted by many nations -- including, in 1927, his own.

Personally I think that timezones and daylight saving should be abolished and replaced with a single universal time. It must be especially problematic in countries like the US and Russia that have multiple timezones.

This topic is now closed to further replies.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!