Recommended Posts

I have a EVGA GTX 560 ti, and i think even i need to upgrade. I can pretty much max out Bf3 at full res though ,so maybe i'll be okay.

Maybe just looking for an excuse to upgrade. A good  680 is about $600+ , but i'll probably need to get a new psu to power that one as well.

 

I wan't all those effects they show in the video.

 

I just hope its nothing like Bad Company 2, where having a higher end pc put you in a disadvantage due to you seeing all the smoke and debris while lower end machines had all that turned off, allowing them to see more.

 

Couple more weeks to beta :p That'll at least give us a chance to see if our current set ups are up to task. Then we have a month to upgrade :D

 

 

Even a 760 sc would be a big step up from your card. And shouldn't require a new PSU.  

Still, even a 760 wont hold a consyant 60fps at 1080p ultra.  Im running 760's sli at 1440p and have to play on med/high to get at least 60 fps.

 

edit: im talking about bf3 of course

I don't know why they'd do one and not the other.  The Battlefield series has had very strong audio support in the past (I only own Bad Company 2 and BF3 along with the two newest Medal of Honors, but still.)

 

Maybe not right away, but I'd still expect it.

Because EA and DICE were talking only about Mantle and didn't say a word about TrueAudio support. That's why I don't have much hope.

And compared to Bad Company 2, the surround in BF3 is terrible. Explosions/shots in the distance sound way too close to you and it's just impossible to pinpoint the footsteps of the enemy, no matter if you use high quality surround speakers or headphones.

Because EA and DICE were talking only about Mantle and didn't say a word about TrueAudio support. That's why I don't have much hope.

And compared to Bad Company 2, the surround in BF3 is terrible. Explosions/shots in the distance sound way too close to you and it's just impossible to pinpoint the footsteps of the enemy, no matter if you use high quality surround speakers or headphones.

I haven't had that experience at all.  Using Realtek or what?

I have a EVGA GTX 560 ti, and i think even i need to upgrade. I can pretty much max out Bf3 at full res though ,so maybe i'll be okay.

Maybe just looking for an excuse to upgrade. A good  680 is about $600+ , but i'll probably need to get a new psu to power that one as well.

 

I wan't all those effects they show in the video.

 

I just hope its nothing like Bad Company 2, where having a higher end pc put you in a disadvantage due to you seeing all the smoke and debris while lower end machines had all that turned off, allowing them to see more.

 

Couple more weeks to beta :p That'll at least give us a chance to see if our current set ups are up to task. Then we have a month to upgrade :D

 

I am running a GTX 770 4 GB on a 500 watt power supply fine. Played Left 4 Dead 2 and Simcity 5 for a little bit. Plus Battlefield 3 all on Ultra quality for around 3 hours. No problems.

I haven't had that experience at all.  Using Realtek or what?

No, a dedicated card from Asus which provides me clear results in other games. And why are you saying that like Realtek is bad?

Are we back in 2008, where on-board sound cards were a bad choice because the lack of features like EAX?

No, a dedicated card from Asus which provides me clear results in other games. And why are you saying that like Realtek is bad?

Are we back in 2008, where on-board sound cards were a bad choice because the lack of features like EAX?

You realize how many channels they have?  It's incredibly easy to use 128 voices, nevermind the 31 most Realtek cards have.

 

It's not about quality, it's about functionality.  They don't have it.

Reckon it'll likely do ultra but high is often actually better performing. Even on epic rigs ultra can introduce more frame lags so while average FPS is still good it'll actually appear more jittery that it ought to.

 

High is probably a good bet.

 

System I'm looking at purchasing comes with a quad core AMD processor and a 2GB GTX 760 and I'm fairly confident it'll comfortably do high settings with decent FPS.

 

The min specs are laughable though...BF3 wouldn't even run on those...I should know - i tried. Needs a quad core from my experience to be anywhere near acceptable.

 

Thanks that's what I was thinking.   

Dang, I was all set to buy a new machine decked out and what not, but with the AMD graphics they just released i want to wait....i never liked ATI/AMD but this new Mantle API sounds interesting. dont wanna fork over 1300 for dual 780's and then have to turn around and sell em to get the new AMD's. I hate having too many choices >.<

Multiplayer trailer and some dates were released:

How to Join: - Join the Beta on:

Pre-order the Battlefield 4 Digital Deluxe Edition - October 1*

Battlefield 3 Premium member - October 1*

Registered owner of Medal of Honor Warfighter Limited Edition or Digital Deluxe Edition - October 1*

Open to all Xbox 360, PlayStation 3 and PC players. Download from Xbox Live, PSN and Origin.com. - October 4*

http://pixelenemy.com/battlefield-4-open-early-access-beta-dates-officially-clarified-by-dice-new-maps-shown-in-latest-trailer/

Pre-ordered the deluxe edition just for the "exclusive" beta access. If I knew there would be an open beta for all, I'd just get the regular version.

But never mind, it's almost here :D

I did NOT pre-order, so I'll be coming in 4 October with all the regulars.

 

The PC beta is x64-only - in other words, don't even think about it if your OS is x32.

 

Fortunately I have the right OS (Windows 8.1 RTM Pro x64), albeit driven by the "wrong" CPU (Intel Q6600) and GPU (nVidia GTX550 Ti - the first non-AMD GPU I bought for my own use in ever).

 

And with the betas for Titanfall AND NFS Rivals as the followups, I'm going to have a VERY interesting fall beta season.

And with the betas for Titanfall AND NFS Rivals as the followups, I'm going to have a VERY interesting fall beta season.

Titanfall gets a beta? I thought nothing was certain yet, and that anything regarding a Titanfall Beta was a scam? Didn't they have a problem with scam mails and sites?

Titanfall gets a beta? I thought nothing was certain yet, and that anything regarding a Titanfall Beta was a scam? Didn't they have a problem with scam mails and sites?

Notice that both games will release after BF4  (Titanfall may not release until 2014), and the first announcement of the beta for Rivals was at Gamescom.

 

I tend to wait for announcement from either developer OR publisher, and this is especially true for games with a large hype quotient - that way, I am not as vulnerable to scams.

 

Of the three games, NFS Rivals is the game I am most excited for - with BF4 and Titanfall roughly a draw..

Notice that both games will release after BF4  (Titanfall may not release until 2014), and the first announcement of the beta for Rivals was at Gamescom.

 

I tend to wait for announcement from either developer OR publisher, and this is especially true for games with a large hype quotient - that way, I am not as vulnerable to scams.

 

Of the three games, NFS Rivals is the game I am most excited for - with BF4 and Titanfall roughly a draw..

The chances for a Titanfall Beta is there, but it's still a new IP, and they might not want to risk cancelled pre-orders and that kind of thing. But that's just a gut feelng.

I know I'd love to see a beta of it, just to test it without having to buy it, to me it just seems like COD with Mechs and thrusters, and just getting to test the gunplay would be wonderful for me. 

This topic is now closed to further replies.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!