How to lock your mouse inside a game on a dual monitor setup.


Recommended Posts

How to lock your mouse in a game on a dual monitor setup. v1.11

Today I?m going to show you how to keep your mouse inside a game if you have a multiple monitor setup. Sometimes with a multiple monitor setup when you move your mouse from left to right inside the game the mouse can leave the game and move to a different monitor. If while your mouse is on the other screen you click (thinking you are still in the game) it can alt + tab you out of the game and in some cases crash it. Most people have no issue with this and their mouse behaves just like it should, for others it's a pain the ass.

Recently while playing the new Tomb Raider my mouse refused to stay inside the monitor the game was on. While looking around the internet I found a bunch of suggestions most of which didn?t work, but there was one that did.

The free program is called

Dual Monitor tools

http://dualmonitorto...ourceforge.net/

snapwindow.jpg

So what does Dual Monitor Tools do? Before you start a game you will press a key combination (which you will configure below). This will lock the mouse inside the screen; it will not be able to go to any of your other monitors until you press that same key combination again. In doing this it also locks your mouse inside the game.

The program comes as a zip file and requires no installation. To use the application simply unzip it to a directory of your choice.

Step 1) Open the directory you just extracted the zip to

Step 2) Double click ?SwapScreen.exe?

Step 3) Right click Swap Screen next to your clock

Step 4) Left click Options

Step 5) Left click on the ?Cursor? tab

Step 6) Go down under ?Lock Cursor onto screen? and click ?Change?. Now select a key combination of your choice.

Step 5) Click close.

That?s it! You are finished! Hurray!

Edited by warwagon

I've been playing many games on a multimonitor hookup, and the games have always locked the mouse inside automatically...?

  • Like 4

I've been playing many games on a multimonitor hookup, and the games have always locked the mouse inside automatically...?

Yep it should lock your mouse automatically, but sometimes people have issues. If they do they can use this.

Some people need a second monitor on during gaming, but if you don't, I would disable it. Activate the charms menu (upper or lower right corner), then go to devices, second screen and select PC screen only or second screen only if that's what you play on, the screen will go to sleep so you don't need to turn it off. Then after gaming go back and redo it except select extend (or duplicate if you use that). Uses less gpu memory, keeps the gpu cooler, and avoids the mouse moving between screens issue. If not using Windows 8 or 2012, you can do it with right click desktop->screen resolution, or maybe there's some program to automate the process out there.

Can people not just be thankful that he went to the trouble of putting this together? You might not have the issue but others do, I for one haven't encountered any issues with the mouse locking but now if I do or if someone asks me about it I know of a new program that could help out so thanks for bringing it to my attention!

Some people need a second monitor on during gaming, but if you don't, I would disable it. Activate the charms menu (upper or lower right corner), then go to devices, second screen and select PC screen only or second screen only if that's what you play on, the screen will go to sleep so you don't need to turn it off. Then after gaming go back and redo it except select extend (or duplicate if you use that). Uses less gpu memory, keeps the gpu cooler, and avoids the mouse moving between screens issue. If not using Windows 8 or 2012, you can do it with right click desktop->screen resolution, or maybe there's some program to automate the process out there.

ctrl+P but having the screen on doesn't really affect FPS or temp to any noticeable degree.

Everyone is correct in saying that you can turn off the screens that you don't want to use while playing the game. In my case I want my screens left on so I can monitor downloads and chats. This is a really great and fast solution to quickly lock and unlock your mouse from a particular screen.

Was never a fan of turning off screens either.. can keep an eye on the other displays while gaming and doesn't hurt the framerate any.. typically prefer running games in a borderless "full screen window" when the option is available. Windows in general (especially 7 and 8) has fantastic multimonitor support. Think I've only had one or two oldies that didn't play nicely with multiple displays and lost focus.. annoying when it happened though, and some old games don't take kindly to losing focus either. (Visual issues or even better, splattage.) Used a similar tool called CursorLock to take care of it.

  • 2 months later...

I registered just to say thanks for this recommendation.

This is necessary not only for running borderless windowed mode with multiple displays, but also for disabling mouse scrolling (which the currently most popular game in the world does not allow) in favor of keyboard scrolling.

Btw I know many gamers who are using underdeveloped open source overlay software that functions ONLY when fullscreen mode is disabled.

@replies saying OP's contribution is useless....you really must be sooo bored with your lives to be finding time and reasons for such "critique". I'm glad I'm not you haha

  • Like 3

I registered just to say thanks for this recommendation.

This is necessary not only for running borderless windowed mode with multiple displays, but also for disabling mouse scrolling (which the currently most popular game in the world does not allow) in favor of keyboard scrolling.

Btw I know many gamers who are using underdeveloped open source overlay software that functions ONLY when fullscreen mode is disabled.

@replies saying OP's contribution is useless....you really must be sooo bored with your lives to be finding time and reasons for such "critique". I'm glad I'm not you haha

Weclome to Neowin! :D

  • 3 weeks later...

I also wanted to reply so Im a new registrant.

Thanks for this suggestion. It does holp a lot in this case.

 

I still have a problem, though that I am struggling with.

Windows 8 has that "charms Bar" on the right and the App bar on the left. When in windowed mode it will activate these corners when my mouse travels over them. This is a pain because if I click and i'm over there it activates whatever item I am hovering over.

 

I'm looking for an ability to disable these menus on one monitor and leave it active on the other. Now it will activate no matter what monitor corner I hover over.

 

Thoughts?

 

I'm going to try Classic Shell.

http://www.askvg.com/classic-shell-get-classic-start-menu-and-explorer-toolbar-buttons-cut-copy-paste-etc-back-in-windows-vista-and-7/

 

It has the ability to disable the Charms bar. I'll report back. In War Thunder (game) I am constantly getting that charms bar showing up so hopefully this will help.

I noticed this happening when the Windows 8 Preview came out last year and even after putting the full version on with my dual monitor setup. Mouse just leaves my game of Sins of a Solar Empire: Rebellion when I scroll around the edge. Thanks for this warwagon!

  • 4 weeks later...

I signed up for an account on the forums here, just to say thank you for this suggestion.

 

I've run multiple displays for years, and every once in a while I come across a game that (for whatever reason) I see this problem with.

 

This suggestion worked perfectly, and is certainly worth taking the time to register for a forum account to say Thanks!

  • Like 2
  • 3 weeks later...
  • 1 month later...

Just wanted to thank the OP.

 

I don't use this for games, but for my desktop.  I was having such a hard time finding the sweet spot to activate charms, etc. on my center monitor in my 3 monitor setup.  This tool allows me to make the cursor "sticky", making it much easier. 

 

This is the kind of thing that should be built into Windows 8.

 

Thanks again!

  • 2 months later...
  • 3 weeks later...

I also registered just to say thank you! this was preventing me from playing FO3 the way I liked. Thanks so much!

 

 

I registered just to say thanks for this recommendation.

This is necessary not only for running borderless windowed mode with multiple displays, but also for disabling mouse scrolling (which the currently most popular game in the world does not allow) in favor of keyboard scrolling.

Btw I know many gamers who are using underdeveloped open source overlay software that functions ONLY when fullscreen mode is disabled.

@replies saying OP's contribution is useless....you really must be sooo bored with your lives to be finding time and reasons for such "critique". I'm glad I'm not you haha

  • 3 weeks later...
  • 1 month later...

I just signed up, just to say thank you. I looked at snakebite's mouse lock, and I didn't like it. This is simplicity at it's best. it does what you want,. and leaves itself open to do more should you choose. Thank you!

 

 

Cheers.

  • 1 month later...

Just for the heck of it I decided to try this with Glactic Starfighter for SWTOR... yeah, as soon as SWTOR is activated as the active program any mouse locking is disabled so it only annoyingly locks the mouse outisde the game if I click somethign when it goes to the other screen...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WACUP 1.99.51.24568 Preview by Razvan Serea WACUP (WinAmp Community Update Project) is a modern, enhanced version of the classic Winamp music player, designed for better stability, performance, and compatibility. Built for Windows, WACUP retains the familiar Winamp interface while adding 64-bit support, bug fixes, and new features like improved audio format support, customizable skins, and optimized playlist management. Unlike bloated alternatives, WACUP focuses on lightweight performance and regular updates, making it the best choice for fans of the classic Winamp experience. Basically, if you miss the good old days of Winamp and want a modern upgrade that doesn’t mess things up, WACUP is for you! WACUP key features: Classic Winamp Feel – Keeps the familiar interface and functionality. Bug Fixes & Stability – Fixes old Winamp issues and improves performance. 64-Bit Support – Works better on modern systems. More Formats & Plugins – Supports additional audio formats and third-party plugins. Customizable UI – Skins and tweaks for a personalized look. Better Library Management – Improved playlists, media organization, and search. No Bloat – Focuses on performance without unnecessary extras. Regular Updates – Community-driven development with new features and fixes. WACUP 1.99.51.24568 Preview changelog: Fixed a deadlock seen from the recent crash reports when doing some of the drag + drop actions within the media library window Fixed a loading crash seen related to a problem with some of the artwork cache image files being restored which should now be better handled allowing for the bad image to be removed without it failing Fixed a deadlock seen from the recent crash reports when the internal metadata cache clearing is triggered which could block the main ui thread for too long with this now being moved to a background thread Fixed some performance issues with some of the methods related to determining artwork support which mainly affected the local library import / refresh (this is still slower for some compared to other players because there's more data & artwork aspects being checked for which means doing more processing on a single file despite the best of attempts to reduce duplicate / heavy processing where possible) Fixed a crash with the JTFE based missing files hotkey which no one seems to have used for an age for this to appear (maybe it's time to seriously consider stripping out features that aren't being used) Fixed how some of the file types which use extra information to reference their sub-songs is handled which was preventing some from being correctly resolved back to their base file (noticed fixing above) Fixed an issue with the handling of files with underscores in their filepath which wasn't being correctly handled causing some of the filename to be lost when shown as the title if title reading is delayed Fixed a few things that might be behind NotSoDirect not being stable for some setups though am still not certain that the changes done for this are going to fully resolve the problem from the crash reports Fixed the OS toast handling when there's no prior shortcut in the OS start menu to now create the shortcut (needed to allow the yes/no buttons for the new build / post-release toast) to be done as a hidden one so it's less likely to cause annoyance for those not wanting to see it whilst still allowing this less than ideal OS api implementation requirement to be met to avoid toasts without the needed buttons Fixed a regression when moving from taglib1 to taglib2 which broke some of the handling in place to allow for external programs to still access files when wacup has a held open cached instance of the file Everything else Updated cppwinrt (gen_win10shell.dll) to 3.0.260520.1 (26 May 2026) Updated libcurl (libcurl.dll) to 8.2.1 (24 Jun 2026) Updated Monkey's Audio (in_ape.dll) to 13.15 (28 Jun 2026) Updated mpg123 (mpg123.dll) to 1.33.6 (6 Jun 2026) Updated OpenSSL (libcurl.dll) to 3.5.7 (9 Jun 2026) Updated pugixml to 1.16 (16 Jun 2026) Updated taglib (tag2.dll) to 2.3.0 (11 May 2026) Updated vgmstream (in_vgmstream.dll) to the latest Git commit from 28 Jun 2026 Download: WACUP 64-bit | 9.6 MB (Freeware) Download: WACUP 32-bit View: WACUP Website | Screenshots Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "over a thousand engineering hours" and started selling it but could not take a couple of minuets to send an AI email to ask permission. What an expensive lesson.
    • just tested it yesterday, a simple page with autoloading ADS takes 60mb....just 1 page for 60 megabytes.   poor people with a limited internet never will visit neolose
    • Tor Browser 15.0.17 by Razvan Serea Protect your privacy. Defend yourself against network surveillance and traffic analysis. Tor is a network of virtual tunnels that allows people and groups to improve their privacy and security on the Internet. The Tor software protects you by bouncing your communications around a distributed network of relays run by volunteers all around the world: it prevents somebody from watching your Internet connection and learning what sites you visit, it prevents the sites you visit from learning your physical location, and it lets you access sites which are blocked. The Tor Browser Bundle lets you use Tor on Windows, Mac OS X, or Linux without needing to install any software. It can run off a USB flash drive, comes with a pre-configured web browser to protect your anonymity, and is self-contained. Tor Browser 15.0.17 changelog: All Platforms Updated Tor to 0.4.9.11 Updated NoScript to 13.6.25.1984 Build System / All Platforms Bug tor-browser-build#41821: Update gpg subkeys for boklm Bug tor-browser-build#41827: Update morgan's keychain with renewed key Download: Tor Browser (64-bit) | Tor Browser (32-bit) | 109.0 MB (Open Source) View: Tor Browser Website | Other Operating Systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      99
    5. 5
      macoman
      56
  • Tell a friend

    Love Neowin? Tell a friend!