Recommended Posts

So how about this as a rumour for a Friday morning? Though AMD will never go on record and confirm this, we have it on good authority that the chip-maker will soon be releasing a super-FX chip. Based on the same 'Vishera' architecture powering the current FX-8350, which runs at up to 4.2GHz, this new FX, codenamed 'Centurion', is to be made available in very limited quantities.

This so-called Centurion is guaranteed to run at 5GHz, on air, though we don't know exactly what voltage or supporting hardware will be required for this lofty speed.

Here's the kicker; our sources indicate that this limited-edition chip is set to cost a whopping $795 - this is not a typo!

Source (hexus.net)

Commentary:

Yes, a processor of probably 150W+ TDP (because of raised vcore) when LGA 2011 Ivy Bridge-E desktop 6-cores are just around the corner is just what AMD must focus on. That said, they must have finally found out that some spare monies is a very useful thing to have, especially at their present, rather sad, financial state (net income in 2012 being loss of USD 1.183 billion). While, on the other hand, Intel probably has been building several olympic class swimming pools to house the stuff formerly sitting in our wallets.

While it would come with a closed loop watercooler rather than air thing (or perhaps taking a cue from Intel - no thermal solution at all) instead of the infamous "jetliner" that has been prevalent in their top series thus far, I don't think I could justify such a purchase. Then again, I'm, admiteddly, an Intel fanboi, so don't mind me at all on that. To be fair, it would find a lot of support among any kind of enthusiants that are now struggling to OC their FX-8350 to a nice round number by hand.

Thoughts?

It smacks to me of the Intel Pentium 4 Extreme days as well. High clock speed to grab headlines.

Yeah pretty much, it screams "we don't have anything to compete against intel, lets throw out crazy megahurtz to fool the average joe"

It smacks to me of the Intel Pentium 4 Extreme days as well. High clock speed to grab headlines.

Why not? PD Arch ain't that bad anymore (when compared to BD) and a stock 5 would give it a lot of juice if you really need a multi-core setup. It's just free publicity for AMD. They need it.

"Yeah pretty much, it screams "we don't have anything to compete against intel, lets throw out crazy megahurtz to fool the average joe""

Stick to the Random pictures thread and don't talk about things you clearly don't understand next time :)

Why not? PD Arch ain't that bad anymore (when compared to BD) and a stock 5 would give it a lot of juice if you really need a multi-core setup. It's just free publicity for AMD. They need it.

No, they need to get their ass in gear. Intel pretty much wipes the floor with anything they have to offer, yeah yeah amd is "cheaper" yeah... 125w TDP for most of their processors against intels 75... add that to your electricity bill and then we can talk cheap.

  • Like 2

They need to grab headlines, AMD isn't in the best position and adding more cores isn't helping when the majority of software isn't taking advantage of them. Going with higher clocks is something that consumers still understand well.

Yeah pretty much, it screams "we don't have anything to compete against intel, lets throw out crazy megahurtz to fool the average joe"

Did you miss the part where the article explicitly said "made available in very limited quantities."?

This clearly isn't intended to be a serious product, it's a PR stunt. Most likely a stop-gap until Steamroller-based FX chips are ready.

No, they need to get their ass in gear. Intel pretty much wipes the floor with anything they have to offer, yeah yeah amd is "cheaper" yeah... 125w TDP for most of their processors against intels 75... add that to your electricity bill and then we can talk cheap.

Haha. Thanks for proving my point. Stick to the pictures thread.

First off, get into gear? Yeah, AMD's total net worth is as big as Intel puts into R&D each quarter, that will be easy, nah why not bankrupt AMD in one quarter.

Secondly.

http://www.phoronix.com/scan.php?page=article&item=amd_fx8350_visherabdver2&num=3

Wiping the floor? Uhm how about no? Multi-threaded programs are taking the use of the PD modular arch for a long time now and even the 3770k has problems keeping up, single threaded, sure that's purely Intel's playground.

I love when people talk out their ass.

Why not? PD Arch ain't that bad anymore (when compared to BD) and a stock 5 would give it a lot of juice if you really need a multi-core setup. It's just free publicity for AMD. They need it.

"Yeah pretty much, it screams "we don't have anything to compete against intel, lets throw out crazy megahurtz to fool the average joe""

Stick to the Random pictures thread and don't talk about things you clearly don't understand next time :)

Because it's a false economy. It's the same as putting 16 megapixel cameras out with crappy image censors, people are being fooled into thinking they're getting something better than they are actually getting. I was against it back then when Intel did it and I am still against it now. This CPU is going to consume a buttload of power and I imagine it will still struggle to compete with the i7s.

Been an AMD Fan since 2003 here, Currently happy with my AMD APU Vision A6 system, does all my tasks really well, Gaming, video encoding (not so much doing that anymore though) DVD burning, music streaming and gaming. Haven't used an Intel based system since December 2002.

Perhaps in the future i'll check out a newer Intel system, but I don't know yet.

  • Like 3

Haha. Thanks for proving my point. Stick to the pictures thread.

First off, get into gear? Yeah, AMD's total net worth is as big as Intel puts into R&D each quarter, that will be easy, nah why not bankrupt AMD in one quarter.

Secondly.

http://www.phoronix....erabdver2&num=3

Wiping the floor? Uhm how about no? Multi-threaded programs are taking the use of the PD modular arch for a long time now and even the 3770k has problems keeping up, single threaded, sure that's purely Intel's playground.

I love when people talk out their ass.

I'm not talking out of my ass, i'm talking design wise, IMO 125w is unacceptable these days, it's just too much, that's what my 7 year old q6600 uses.

You and me, we've had this discussion on the linux benchmarks before ;)

Arguing with Blues is like running head first into a wall..I'm too drunk for this ****. :/

I'm green dude, I would love AMD to kick ass :( like in the thoroughbred days :(, but its just no happening for another 2-3 years because of AMDs RnD budget as you pointed out.

The fanboys are on the AMD side, they've taken a habit of getting ****y about it when people advocate the use of Intel processors for some reason. I used to be in the same corner myself, back in the days when Pentium 4s were crap and Athlon 64s were not I argued the other way around. Reality is what it is and if people choose to get angry about it, that's their problem.

The fanboys are on the AMD side, they've taken a habit of getting ****y about it when people advocate the use of Intel processors for some reason. I used to be in the same corner myself, back in the days when Pentium 4s were crap and Athlon 64s were not I argued the other way around. Reality is what it is and if people choose to get angry about it, that's their problem.

Yeah you do have a point, I try to hand around and listen to both sides, i've switched from AMD k6, k7 to intel p4, c2d and finally q6600, my future upgrade might be an intel "K" version, my point is, there is no absolute king.

And who do we thank for that? :)

Me, please, I'm the original fanboi here :)

I'm getting some kicks out of it. But at the same time, inspired from a recent thread of one remixed cat, afraid that I might ask for all parties involved to keep it a bit more civil before I get my very rare BPN thread closed :(

Damn, if it wasn't for the price tag I would of got one.

When are we gonna start to see DDR4 supported chips :/ - that's what I'm holding out upgrading for.

DDR4 supported CPUs for the public won't be around until the end of 2014 or maybe 2015. Since they cost way to much for anyone to use.

Me, please, I'm the original fanboi here :)

I'm getting some kicks out of it. But at the same time, inspired from a recent thread of one remixed cat, afraid that I might ask for all parties involved to keep it a bit more civil before I get my very rare BPN thread closed :(

I was referring to AMD's R&D budget ;)

DDR4 supported CPUs for the public won't be around until the end of 2014 or maybe 2015. Since they cost way to much for anyone to use.

http://www.fudzilla.com/home/item/31064-haswell-e-supports-ddr4

Even before Ivy Bridge-E hits the market, Intel is busy working on a successor to this ultra high end processor simply codenamed Haswell E. Ivy Bridge-E is on schedule to launch in Q3 2013, using the same LGA 2011 socket, existing X79 chipset as well as four channel DDR3 1866 support.

Just when people count out AMD, they seem to come back with something good.

:laugh:

I was referring to AMD's R&D budget ;)

I think what they've managed to get done with the comparatively little amount they have is very commendable. I blame all the rest of the world (of software architects) that most office and consumer space programs won't take advantage of (any kind - Intel, AMD, ARM-OEMs) multi-core setups easily, nor do they show any particular inclination of doing so any time soon. Blaming developers won't solve anything, though, so... mustshifttheblametoamdyesyesyes

There are days when I rant my face off because of (but, fortunately for myself, not at) people who "dare to bring their stupid broken AMD systems" (or stupid broken Radeons) for service. Fanboism coupled with suddenly having a pile of work leads to that easily.

As a side note, I've had to exchange two borked AMD FX processors (one Dozer, one PD, both failing PRIME95 in seconds) in the little time I've been in this line of work, while Intel sells five times more and has had none. Any sensible explanation to that? Other than isolated cases, I mean? Because it adds immense amount of fuel to fan-raging, otherwise.

This topic is now closed to further replies.
  • Posts

    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!