Massive Fertilizer Explosion in West, TX


Recommended Posts

It's called a fuel-air explosion, or thermobaric explosion. and they can generate overpressure waves greater than a small tactical nuke**. Nasty SOB's.

We had a grain silo explosion near here about 20 years ago that tossed oversize solid concrete blocks almost a mile.

** 1 kiloton nuke air burst is up to 50 psi overpressure. Military fuel-lair explosives can run up to 450 psi, travelling at over 7,000 mph.

When you have something that is somewhat flammable in a fine powered airborne form like even simple flour, just a small spark can create an explosion on par with a large military bomb.

Exactly. Airborne flour can be extremely explosive, let alone fertiliser (a product used in a lot of explosives).

This is a terrible tragedy and hopefully not the result of negligence, criminal or otherwise. The video posted earlier, despite being very low quality, did a good job conveying the scale of the incident. But it serves as an example of how people react to?what appears to be?an accident like this in comparison to a much less deadly deliberate attack like the Boston Marathon Bombing - even relatively small terrorist attacks cause a massive amount of fear and anger, greatly disproportional to the actual risk posed to society.

I'm in Abilene, and I swore we had a minor earthquake earlier in the evening. Could've just been me, but I swear, I felt the concrete below my feet shaking...or maybe it was the explosion, but either way, it was weird. I literally felt the ground shake, like it was shaking my boots. Could be related, but then again, maybe it wasn't, I'm not sure either way....still, a scary scenario either way, and I pray for the families this explosion may have affected. Such sad, sad things, happening in our country. Makes me sad. :'(

They said the blast cause a 2.1 on the Richter scale and could be felt up to 50 miles away.

Seriously .... who the ****'s idea was it to have a plant like this near a school, nursing home and the hospital

The plant was there first but they could still have had regulations stating those other places couldn't be built so close

Similar to the PEPCON disaster in Nevada in 1988. They produced ammonium perchlorate used in solid fuel rocket boosters as an oxidizer. http://en.wikipedia.org/wiki/PEPCON_disaster

http://youtu.be/HJVOUgCm5Jk

1) How do you know it was a group? Besides that it has nothing to do with this thread.

2) How do you know it was caused by some one, accidental or otherwise? It could have just been machinery malfunction that started it all.

I don't see any need to discuss it further in this particular thread.

1) How do you know it was a group? Besides that it has nothing to do with this thread.

2) How do you know it was caused by some one, accidental or otherwise? It could have just been machinery malfunction that started it all.

I don't see any need to discuss it further in this particular thread.

Wasn't actually expecting a discussion - they are indeed unrelated - I just thought the numbers were interesting.

That plant is an inherently unsafe place and thus requires extremely stringent safety protocols. Barring a freak accident, someone could well find themselves in a lot of trouble once more information about the cause of the explosion is uncovered.

Of note, this guy was at both the Boston Marathon, and close enough to see the Texas explosion.

Survived both with no harm. Stay either very far away from this man, or very close.

http://gawker.com/5995027/unluckiest-luckiest-man-survives-both-marathon-bombing-and-waco-blast

Seriously .... who the ****'s idea was it to have a plant like this near a school, nursing home and the hospital

Well, I guess at the time nothing bad had ever happened so they figured nothing probably ever would. I bet they reconsider that now.

Somebody just posted this video on Facebook from a slightly further distance than the first video shared, and in this one you can clearly see that prior to the explosion, rescue workers and firefighters are already on the scene fighting the fire, and then once the explosion happens I guess it took their truck and everything with it because you don't see their flashing lights any more. Really quite sad. I haven't gone looking for a YouTube link yet, so here's where I saw it.

Warning, some language may be NSFW.

https://www.facebook...151444935809601

reports are saying that some 60 are still unaccounted for.... a blast of that magnitude/heat can turn bodies into mist vapor.

It's crazy to watch that video, and realize that at the beginning of that 50 second clip, there are living, breathing human beings just like us in there just trying to do their job and minimize damage, and by the end of it they're all dead.

Texas Explosion Seen as Sign of Weak U.S. Oversight

http://www.bloomberg...-oversight.html

The Texas plant that was the scene of a deadly explosion this week was last inspected by theOccupational Safety and Health Administration in 1985. The risk plan it filed with regulators listed no flammable chemicals.
  • Like 1

Texas fertilizer company didn't heed disclosure rules before blast

http://www.reuters.com/article/2013/04/20/us-usa-explosion-regulation-idUSBRE93J09N20130420

The fertilizer plant that exploded on Wednesday, obliterating part of a small Texas town and killing at least 14 people, had last year been storing 1,350 times the amount of ammonium nitrate that would normally trigger safety oversight by the U.S. Department of Homeland Security (DHS)

Similar to the PEPCON disaster in Nevada in 1988. They produced ammonium perchlorate used in solid fuel rocket boosters as an oxidizer. http://en.wikipedia.org/wiki/PEPCON_disaster

The two final PEPCON explosions totaled 2.7 kilotons of TNT blast equivalence, with each being slightly more powerful than West. Hiroshima's Little Boy nuke was 16 kilotons.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!